Society of Automotive Engineers（美国机动车工程师学会）SAE

美国机动工程师协会（Society of Automotive Engineers，简称SAE）成立于1905年，是国际上最大的汽车工程学术组织。研究对象是轿车、载重车及工程车、飞机、发动机、材料及制造等。SAE所制订的标准具有权威性，广泛地为汽车行业及其他行业所采用，并有相当部分被采用为美国国家标准。

 SAE并非强制性认证，SAE不负责产品认证，只发布标准，任何有能力的测试实验室均可以按照SAE标准进行产品测试，出具测试报告。申请企业对认证的产品结果负全部责任。

目前SAE已拥有97个国家的超过84，000成员，每年新增或修订600余个汽车方面及航天航空工程方面的标准类文件。

我们可以提供大部分的SAE J标准的委托测试和美国MFVSS标准的测试。我们的测试实验室均有CNAS,ISO17025的认可，可以获得美国和其他世界各国的认可。

l         SAE航天标准-SAE Aerospace Standards（AS） – 超过3,900个文件。

SAE地面车辆标准-SAE Ground Vehicle Standards（J Reports）标准目录清单

       SAE J1001-1987(R2004) Industrial Flail Mowers and Power Rakes 页
SAE J100-2005 Class"A" Vehicle Glazing Shade Bands 页
SAE J1004-2004 Glossary of Engine Cooling System Terms 页
SAE J1008-1987 Sound Measurement - Self- Propelled Agricultural Equipment - Exterior, Recommended Practice January 1987 页
SAE J101-1989 Hydraulic Wheel Cylinders for Automotive Drum Brakes December 1989 页
SAE J101-2006 (R) Hydraulic Wheel Cylinders for Automotive Drum Brakes 页
SAE J1012-1993 (R) Operator Enclosure Pressurization System Test Procedure, Recommended Practice June 1993 页
SAE J1013-1992 (R) Measurement of Whole Body Vibration of the Seated Operator of Off- Highway Work Machines, Standard August 1992 页
SAE J1014-1979(R2004) Classification and Nomenclature Towing Winch for Skidders and Crawler Tractors 页
SAE J1015-1991(R1995) Ton Kilometer per Hour Test Procedure, Standard; 页
SAE J1017-1973(R1986) Nomenclature - Rollers/ Compactors, Standard; July 1973 页
SAE J1019-1990 Tests and Procedures for High Temperature Transmission Oil Hose, Engine Lubricating Oil Hose, and Hose Assemblies, Standard 页
SAE J10-2000 (R) Automotive and Off-Highway Air Brake Reservoir Performance and Identification Requirements 页
SAE J1024-1989 Fuel-Fired Heaters - Air Heating - for Construction and Industrial Machinery, Standard December 1989 页
SAE J1025-1973(R2000) Test Procedures for Measuring Truck Tire Revolutions Per Kilometer/Mile 页
SAE J1028-1998 Mobile Crane Working Area Definitions 页
SAE J1029-1996 (R) Lighting and Marking of Construction, Earthmoving Machinery 页
SAE J1032-1987 Definitions for Machine Availability (Off-Road Work Machines), Recommended Practice April 1987 页
SAE J1033-1988(R1993) Procedure for Measuring Bore and Face Runout of Flywheels, Flywheel Housings, and Flywheel Housing Adapters, Recommended Practice 页
SAE J1037-2001(R2006) Windshield Washer Tubing 页
SAE J1038-1992 (R) Recommendations for Children? Snowmobile, Recommended Practice December 1992 页
SAE J1042-1986(R1993) Operator Protection for General-Purpose Industrial Machines 页
SAE J1044-1981 World Manufacturer Identifier, Recommended Practice December 1981 页
SAE J1050-2003 (R) Describing and Measuring the Driver? Field of View 页
SAE J1051-1993(R2002) Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines 页
SAE J1052-2002 (R) Motor Vehicle Driver and Passenger Head Position 页
SAE J1053-1996 (R) Steel Stamped Nuts of One Pitch Thread Design - Inch Series, Standard August 1996 页
SAE J1053M-1996 (R) Steel Stamped Nuts of One Pitch Thread Design - Metric Series, Standard August 1996 页
SAE J1058-1999 (R) Standard Sheet Steel Thickness and Tolerances 页
SAE J1059-1984 Speedometer Test Procedure, Recommended Practice June 1984 页
SAE J1060-1973(R2000) Subjective Rating Scale for Evaluation of Noise and Ride Comfort Characteristics Related to Motor Vehicle Tires 页
SAE J1061-1975(R1998) Surface Discontinuities on General Application Bolts, Screws, and Studs 页
SAE J1062-1974(R1995) Snowmobile Passenger Handgrips, Recommended Practice 页
SAE J1063-1993 (R) Cantilevered Boom Crane Structures - Method of Test, Standard November 1993 页
SAE J1065-2003 (R) Nominal Reference Working Pressures for Steel Hydraulic Tubing 页
SAE J1067-1998 (R) Seven-Conductor Cable 页
SAE J1069-1981 Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines, Recommended Practice June 1981 页
SAE J1071-2003 Operator Controls for Graders 页
SAE J107-1980(R1996) Operator Controls and Displays on Motorcycles 页
SAE J1072-1977 Sintered Tool Materials, Recommended Practice 页
SAE J1073-1990(R1995) Spring-Loaded Clutch Spin Test Procedure, Recommended Practice 页
SAE J1074-1974(R2000) Engine Sound Level Measurement Procedure 页
SAE J1075-2000 (R) Sound Measurement - Construction Site 页
SAE J1076-1990 Backup Lamp Switch, Standard March 1990 页
SAE J1078-1986(R1994) Recommended Method of Analytically Determining the Competence of Hydraulic Telescopic Cantilevered Crane Booms, Information Report; 页
SAE J1079-1988(R1995) Overcenter Clutch Spin Test Procedure, Recommended Practice 页
SAE J1081-2000 Potential Standard Steels 页
SAE J108-1973(R2000) Brake System Road Test Code - Motorcycles 页
SAE J1084-1980(R2002) Operator Protective Structure Performance Criteria for Certain Forestry Equipment 页
SAE J1085-1999 Testing Dynamic Properties of Elastomeric Isolators 页
SAE J1086-1995 Numbering Metals and Alloys, Recommended Practice July 1995 (ASTM E 527) 页
SAE J1087-1990(R2000) One-Way Clutches - Nomenclature and Terminology 页
SAE J1088-1993 (R) Test Procedure for the Measurement of Gaseous Exhaust Emissions from Small Utility Engines, Recommended Practice February 1993 页
SAE J1091-1996(R2003) Earthmoving Machinery - Operator? Field of View 页
SAE J109-1969(R2000) Service Brake System Performance Requirements - Motorcycles and Motor-Driven Cycles 页
SAE J1093-1994 (R) Latticed Crane Boom Systems - Analytical Procedure, Information Report March 1994 页
SAE J1094-1992 Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report June 1992 页
SAE J1095-2003 Spoke Wheels and Hub Fatigue Test Procedures 页
SAE J1096-1976(R2000) Measurement of Exterior Sound Levels for Heavy Trucks Under Stationary Conditions 页
SAE J1097-2005 Hydraulic Excavator Lift Capacity Calculation and Test Procedure Reissued 页
SAE J1098-1991(R1995) Ton Kilometer per Hour Application, Standard; 页
SAE J1099-2002 Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous of Materials 页
SAE J1100-2005 (R) Motor Vehicle Dimensions 页
SAE J1101-1997(R2002) Test Procedure for Parking Stability of Motorcycles 页
SAE J1102-1995 (R) Mechanical and Material Requirements for Wheel Bolts, Standard February 1995 页
SAE J1102M-2001 Mechanical and Material Requirements for Metric Wheel Bolts 页
SAE J1105-1980(R1989) Horn - Forward Warning - Electric - Performance, Test, and Application, Recommended Practice 页
SAE J1106-1975 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Recommended Practice January 1975 页
SAE J1107-1975 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Information Report January 1975 页
SAE J1109-1988(R1993) Component Nomenclature - Articulated Log Skidder, Rubber-Tired 页
SAE J1111-1994(R2002) Component Nomenclature - Skidder-Grapple 页
SAE J1113-11-2006 Immunity to Conducted Transients on Power Leads 页
SAE J1113-1-2002 (R) Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (50 Hz to 18 GHz) 页
SAE J1113-12-2000 (R) Electrical Interference by Conduction and Coupling - Coupling Clamp and Chattering Relay 页
SAE J1113-12-2006 Electrical Interference by Conduction and CouplingCapacitive and Inductive Coupling via Lines Other than Supply Lines 页
SAE J1113-13-2004 Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsPart 13: Immunity to Electrostatic Discharge 页
SAE J1113-21-2005 (R) Electronmagnetic Compatibility Measurement Procedure for Vehicle Components Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber 页
SAE J1113-2-2004 (R) Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Except Aircraft)Conducted Immunity, 15 Hz to 250 kHzAll Leads 页
SAE J1113-22-2003 Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Part 22Immunity to Radiated Magnetic Fields 页
SAE J1113-24-2000 Immunity to Radiated Electromagntic Fields; 10 kHz to 200 MHz - Crawford TEM Cell and 10 kHz to 5 GHz - Wideband TEM Cell 页
SAE J1113-26-2001(R2006) Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields 页
SAE J1113-27-2005 (R) Electromagnetic Compatibility Measurements Procedure for Vehicle Components Part 27Immunity To Radiated Electromagnetic FieldsMode Stir Reverberation Method 页
SAE J1113-28-2004 Electromagnetic Compatibility Measurements Procedure for Vehicle ComponentsPart 28 Immunity to Radiated Electromagnetic FieldsReverberation Method (Mode Tuning) 页
SAE J1113-3-1995 Conducted Immunity, 250 kHZ to MHz, Direct Injection of Radio Frequency (RF) Power, Standard November 1995 页
SAE J1113-3-2006 Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power 页
SAE J1113-41-1995(R2000) Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used on Board Vehicles 页
SAE J1113-4-2004 (R) Immunity to Radiated Electromagnetic FieldsBulk Current Injection (BCI) Method 页
SAE J1113-42-2000 (R) Electromagnetic Compatibility - Component Test Procedure - Part 42 - Conducted Transient Emissions September 2000 页
SAE J1114-2005 Fuel Tank Filler Cap and Cap Retainer Threaded 页
SAE J1115-1976 Guidelines for Developing and Revising SAE Nomenclature and Definitions, Information Report 页
SAE J1116-2004 Categories of Off-Road Self-Propelled Work Machines 页
SAE J1117-1975(R1986) Method of Measuring and Reporting the Pressure Differential-Flow Characteristics of a Hydraulic Fluid Power Valve, Recommended Practice 页
SAE J1118-1993(R2002) Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure 页
SAE J1119-1980(R2002) Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) 页
SAE J1120-1989 Spherical Rod Ends, Standard June 1989 页
SAE J1121-1988 Helical Compression and Extension Spring Terminology, Recommended Practice July 1988 页
SAE J1121-2006 Helical Compression and Extension Spring Terminology 页
SAE J1122-2004 Helical Springs: Specification Check Lists 页
SAE J1123-1985(R1992) Leaf Springs for Motor Vehicle Suspension - Made to Metric Units, Standard; 页
SAE J1124-1987 Glossary of Terms Related to Fluid Filters and Filter Testing, Recommended Practice March 1987 页
SAE J1127-2005 Low Voltage Battery Cable 页
SAE J1128-2005 Low Voltage Primary Cable 页
SAE J112A-1971(E 1977) Electric Windshield Wiper Switch 页
SAE J1131-1998 Performance Requirements for SAE J844 Nonmetallic Tubing and Fitting Assemblies Used in Automotive Air Brake Systems 页
SAE J1133-1996(R2004) School Bus Stop Arm 页
SAE J1134-1992(R2000) (R) SAE Nodal Mount 页
SAE J1137-1995(R2002) Hydraulic Valves for Motor Vehicle Brake Systems - Performance Requirements 页
SAE J1138-1999 (R) Design Criteria - Driver Hand Controls Location for Passenger Cars, Multipurpose Passenger Vehicles, and Trucks (10 000 GVW and under) 页
SAE J1139-1994(R1999) Direction-Of-Motion Stereotypes for Automotive Hand Controls 页
SAE J114-1994 (R) Seat Belt Hardware Webbing Abrasion Performance Requirements June 1994 页
SAE J1142-1994 (R) Towability Design Criteria and Equipment Use - Passenger Cars, Vans, and Light-Duty Trucks, Recommended Practice February 1994 页
SAE J1143-1994 (R) Towed Vehicle/Tow Equipment Attachment Test Procedure - Passenger Cars, Vans, and Light Duty Trucks, Recommended Practice February 1994 页
SAE J1144-2000 Towed Vehicle Drivetrain Test Procedure Passenger Cars, Vans, and Light-Duty Trucks 页
SAE J1147-1983 Welding, Brazing, and Soldering - Materials and Practices, Information Report June 1983 页
SAE J1148-2004 (R) Engine Charge Air Cooler (CAC) Nomenclature 页
SAE J1149-1991 Metallic Air Brake System Tubing and Pipe June 1991 页
SAE J1151-1991 (R) Methane Measurement Using Gas Chromatography 页
SAE J115-1995(R2003) Safety Signs 页
SAE J1153-1991 Hydraulic Master Cylinders for Motor Vehicle Brakes - Test Procedure, Standard June 1991 页
SAE J1154-1991 Hydraulic Master Cylinders for Motor Vehicle Brakes - Performance Requirements, Standard June 1991 页
SAE J1158-1977(R2004) Specification DefinitionsWinches for Crawler Tractors and Skidders 页
SAE J1161-2004 Operational Sound Level Measurement Procedure for Snow Vehicles 页
SAE J1163-1991(R1997) Determining Seat Index Point 页
SAE J1165-1979(R1986) Reporting Cleanliness Levels of Hydraulic Fluids, Recommended Practice 页
SAE J1166-1998 Sound Measurement - Off-Road Self-Propelled Work Machines Operator-Work Cycle 页
SAE J1167-1998 Motorcycle Stop Lamp Switch 页
SAE J1168-1977(R2002) Motorcycle Bank Angle Measurement Procedure 页
SAE J1169-1998 Measurement of Light Vehicle Exhaust Sound Level under Stationary Conditions 页
SAE J1171-1977(R2004) External Ignition Protection of Marine Electrical Devices 页
SAE J1172-1977(R1993) Engine Flywheel Housings with Sealed Flanges, Recommended Practice 页
SAE J1173-1988 Size Classification and Characteristics of Glass Beads for Peening, Recommended Practice September 1988 页
SAE J1174-1977(R1985) Operator Ear Sound Level Measurement Procedure for Small Engine Powered Equipment, Recommended Practice 页
SAE J1175-1977(R1985) Bystander Sound Level Measurement Procedure for Small Engine Powered Equipment, Recommended Practice 页
SAE J1176-1977(R1986) External Leakage Classifications for Hydraulic Systems, Recommended Practice 页
SAE J1177-1978(R2002) Hydraulic Excavator Operator Controls 页
SAE J1179-1990(R2002) Hydraulic Excavator and Backhoe Digging Forces 页
SAE J1180-1977(R1980) Telescopic Boom Length Indicating System 页
SAE J1183-1998 Recommended Guidelines for Fatigue Testing of Elastomeric Materials and Components 页
SAE J1191-1977(R2005) High Tension Ignition Cable Assemblies-Marine 页
SAE J119-2005 Fiberboard Crease Bending Test 页
SAE J1194-1977(R1999) Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors 页
SAE J1197-1991(R2002) Rated Operating Load for Loaders Equipped with Log or Material Forks without Vertical Mast 页
SAE J1199-2001 Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners 页
SAE J1200-1977(R1998) Blind Rivets - Break Mandrel Type 页
SAE J1204-1997 (R) Wheels - Recreational and Utility Trailer Test Procedure 页
SAE J1205-1997 Performance Requirements for Snap-In Tubeless Tire Valves 页
SAE J1206-1997 (R) Methods for Testing Snap-In Tubeless Tire Valves 页
SAE J1207-1978(R2000) Measurement Procedure for Determination of Silencer Effectiveness in Reducing Engine Intake or Exhaust Sound Level 页
SAE J1211-1978 Recommended Environmental Practices for Electronic Equipment Design, Recommended Practice November 1978 页
SAE J121-1997 Decarburization in Hardened and Tempered Unified Threaded Fasteners 页
SAE J1212-1978(R1985) Fire Prevention on Forestry Equipment, Information Report; April 1978 页
SAE J1213-1-1997 (R) Glossary of Vehicle Networks for Multiplexing and Data Communications 页
SAE J1213-2-1988 Glossary of Reliability Terminology Associated with Automotive Electronics, Information Report October 1988 页
SAE J1214-1992(E 2002) Tire to Body Clearance Check for Recreational Vehicles 页
SAE J121M-1997 Decarburization in Hardened and Tempered Metric Threaded Fasteners 页
SAE J122-1975(R1998) Surface Discontinuities on Nuts 页
SAE J1222-1981(R1995) Speed Control Assurance for Snowmobiles, Recommended Practice 页
SAE J1223-1993(R2000) Marine Carburetors and Fuel Injection Throttle Bodies 页
SAE J1226-1983 Electric Speedometer Specification - on Road, Recommended Practice; February 1983 页
SAE J1227-1979(R1986) Assessing Cleanliness of Hydraulic Fluid Power Components and Systems 页
SAE J1229-1981 Truck Identification Terminology, Recommended Practice December 1981 页
SAE J1231-2004 Formed Tube Ends for Hose Connections and Hose Fittings 页
SAE J123-1994 (R) Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications 页
SAE J1232-1978(R2000) Passenger and Light Truck Tire Traction Device Profile Determination and Classification 页
SAE J1233-1985 Commercial Literature Specifications - off- Road Work Machines, Standard January 1985 页
SAE J1235-1978(R1986) Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve, Recommended Practice 页
SAE J1236-1995 (R) Cast Iron Sealing Rings (Metric), Recommended Practice May 1995 页
SAE J1237-2001 Metric Thread Rolling Screws 页
SAE J1238-1978(R1998) Rating Lift Cranes on Fixed Platforms Operating in the Ocean Environment 页
SAE J1239-2003 Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers 页
SAE J1240-1991 (R) Flywheel Spin Test Procedure 页
SAE J1241-1999 (R) Fuel and Lubricant Tanks for Motorcycles 页
SAE J1242-1991 Acoustic Emission Test Methods, Information Report March 1991 页
SAE J1244-1988(R2003) Oil Cooler Nomenclature and Glossary 页
SAE J1246-1997(R2003) Measuring the Radius of Curvature of Convex Mirrors 页
SAE J1247-2002 Simulated Mountain-Brake Performance Test Procedure 页
SAE J1248-1991(R1998) Performance Requirements for Parking Stability of Motorcycles 页
SAE J1249-2000 Former SAE Standard and Former SAE Ex-Steels 页
SAE J125-1969(R1988) Elevated Temperature Properties of Cast Irons 页
SAE J1252-1981 SAE Wind Tunnel Test Procedure for Trucks and Buses, Recommended Practice July 1981 页
SAE J1253-1993 Low-Temperature Cranking Load Requirements of an Engine, Recommended Practice June 1993 页
SAE J1254-1995(R2002) Component Nomenclature - Feller Buncher 页
SAE J1257-1980 Rating Chart for Cantilevered Boom Cranes, Recommended Practice October 1980 页
SAE J1259-1989 METRIC SPHERICAL ROD ENDS 页
SAE J1260-1994 (R) Standard Oil Filter Test Oil, Standard April 1994 页
SAE J1261-1979(R1984) Agricultural Tractor Tire Dynamic Indices, Information Report; 页
SAE J126-1969(R1986) Selecting and Specifying Hot and Cold Rolled Steel Sheet and Strip 页
SAE J1263-1996(R1996) Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques 页
SAE J1264-1979(R1986) Joint RCCC/SAE Fuel Consumption Test Procedure (Short Term In-Service Vehicle), Type 1, Recommended Practice 页
SAE J1266-2001 Axle Efficiency Test Procedure 页
SAE J1267-1984(R1988) Leakage Testing, Information Report; 页
SAE J1268-1995 Hardenability Bands for Carbon and Alloy H Steels, Standard May 1995 页
SAE J1269-1987(R2000) Rolling Resistance Measurement Procedure for Passenger Car, Light Truck, and Highway Truck and Bus Tires 页
SAE J1269-2006 Rolling Resistance Measurement Procedure for Passenger Car, Light Truck, and Highway Truck and Bus Tires 页
SAE J1270-1987(R2000) Measurement of Passenger Car, Light Truck, and Highway Truck and Bus Tire Rolling Resistance 页
SAE J1270-2006 Measurement of Passenger Car, Light Truck, and Highway Truck and Bus Tire Rolling Resistance 页
SAE J1272-2003 (R) Felling Head Terminology and Nomenclature 页
SAE J1273-2004 Recommended Practices for Hydraulic Hose Assemblies 页
SAE J1276-1979(R1986) Standardized Fluid for Hydraulic Component Tests, Recommended Practice 页
SAE J1277-1990 (R) Method for Assessing the Cleanliness Level of New Hydraulic Fluid, Standard July 1990 页
SAE J1278-1980(R1993) SI (Metric) Synchronous Belts and Pulleys, Standard; 页
SAE J1279-1988(R1995) Snowmobile Drive Mechanisms, Recommended Practice 页
SAE J1281-1979(R1985) Operator Sound Level Exposure Assessment Procedure for Pleasure Motorboats, Recommended Practice 页
SAE J128-1994 (R) Occupant Restraint System Evaluation - Passenger Cars and Light-Duty Trucks November 1994 页
SAE J1282-2003 Snowmobile Brake Control Systems 页
SAE J1283-2000 Electrical Connector for Auxiliary Starting of Construction, Agricultural, and Off-Road Machinery 页
SAE J1284-1988 Blade Type Electric Fuses, Standard April 1988 页
SAE J1286-1987(R2004) Thrust Test Device 页
SAE J1287-1988(R1998) Measurement of Exhaust Sound Levels of Stationary Motorcycles 页
SAE J1288-1985(R2005) Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies 页
SAE J1289-1981 Mobile Crane Stability Ratings, Recommended Practice April 1981 页
SAE J1290-2002 (R) Automotive Hydraulic Brake System - Metric Tube Connections 页
SAE J1291-2002 (R) Automotive Hydraulic Brake SystemMetric Banjo Bolt Connections 页
SAE J129-1981 Engine and Transmission Identification Numbers December 1981 页
SAE J1292-1981 Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring, Recommended Practice October 1981 页
SAE J1293-1990 Undervehicle Coupon Corrosion Tests, Recommended Practice January 1990 页
SAE J1294-2004 Ignition DistributorsMarine 页
SAE J1297-2002 (R) Alternative Automotive Fuels 页
SAE J1298-1997 (R) Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic Port Sizes and Locations 页
SAE J1299-2003 Electrical Propulsion Control - Off-Road Dumpers 页
SAE J1301-1994(R2003) Truck Deformation Classification 页
SAE J1303-1985(R2006) Cutting EdgeCross Sections Loader Straight 页
SAE J1304-1985(R2006) Cutting EdgeCross Sections Loader Straight with Bolt Holes 页
SAE J1305-1987 Two-Block Warning and Limit Systems in Lifting Crane Service, Recommended Practice June 1987 页
SAE J1306-1980(R2002) Motorcycle Auxiliary Front Lamps 页
SAE J1307-1986(R2002) Excavator and Backhoe Hand Signals 页
SAE J1308-1985(R1999) Fan Guard for Off-Road Machines 页
SAE J1309-2003 Travel Performance and Rating Procedure, Crawler Mounted Hydraulic Excavators, Material Handlers, Knuckle Boom Log Loaders, and Certain Forestry Equipment 页
SAE J1310-1993 Electric Engine Preheaters and Battery Warmers for Diesel Engines, Information Report June 1993 页
SAE J131-1997(R2003) Motorcycle Turn Signal Lamps 页
SAE J1312-1990(R1995) Procedure for Mapping Engine Performance - Spark Ignition and Compression Ignition Engines, Standard; 页
SAE J1313-1980(R1993) Automotive Synchronous Belt Drives, Recommended Practice 页
SAE J1315-1991 Off-Road Tire and Rim Selection and Application, Standard January 1991 页
SAE J1317-1982 Electrical Propulsion Rotating Equipment - Off-Road Dumper, Recommended Practice June 1982 页
SAE J1318-1998 (R) Gaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles 页
SAE J1319-2005 Fog Tail Lamp (Rear Fog Light) Systems 页
SAE J1320-1981(R2004) Marine Electrical Switches 页
SAE J1321-1981(R1986) Joint TMC/SAE Fuel Consumption Test Procedure - Type II, Recommended Practice 页
SAE J1323-2003 Standard Classification System for Fiberboards 页
SAE J1324-1989 Acoustical and Thermal Materials Test Procedure, Recommended Practice October 1989 页
SAE J1326-1985 Test Method for Measuring Wet Color Transfer Characteristics, Recommended Practice February 1985 页
SAE J1330-1994(R2000) Photometry Laboratory Accuracy Guidelines 页
SAE J133-2003 (R) Fifth Wheel Kingpin PerformanceCommercial Trailers and Semitrailers 页
SAE J1332-1981 Rope Drum Rotation Indicating Device, Recommended Practice October 1981 页
SAE J1333-1990 Hydraulic Cylinder Rod Corrosion Test, Recommended Practice March 1990 页

      SAE J1334-2003 (R) Hydraulic Cylinder Integrity Test 页
SAE J1335-1990 Hydraulic Cylinder No-Load Friction Test, Recommended Practice; April 1990 页
SAE J1336-1987 Hydraulic Cylinder Leakage Test, Recommended Practice June 1987 页
SAE J1337-1997 Off-Road Rim Maintenance Procedures and Service Precautions 页
SAE J1339-2002 (R) Test Method for Measuring Power Consumption of Engine Cooling Fans 页
SAE J1340-1981(R2003) Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses 页
SAE J134-1979(R1993) Brake System Road Test Code - Passenger Car and Light-Duty Truck-Trailer Combinations 页
SAE J1342-2001 (R) Test Method for Determining Power Consumption of Engine Cooling Fan-Drive Systems 页
SAE J1343-2000 (R) Information Relating to Duty Cycles and Average Power Requirements of Truck and Bus Engine Accessories 页
SAE J1344-1997 Marking of Plastic Parts 页
SAE J1346-1981 Guide to Manifold Absolute Pressure Transducer Representative Test Method, Information Report June 1981 页
SAE J1347-1996 (R) Guide to Manifold Absolute Pressure Transducer Representative Specification 页
SAE J1349-2004 Engine Power Test CodeSpark Ignition and Compression IgnitionNet Power Rating 页
SAE J1350-1981(R1988) Selection and Application Guidelines for Diesel, Gasoline, and Propane Fired Liquid Cooled Engine Pre-Heaters, Information Report; 页
SAE J1351-1981(R1993) Hot Odor Test for Insulation Materials, Recommended Practice 页
SAE J135-1985(R1993) Service Brake System Performance Requirements - Passenger Car-Trailer Combinations 页
SAE J1352-2005 Compression and Recovery of Insulation Paddings 页
SAE J1353-1995(R2002) Nomenclature - Clam Bunk Skidder Recommended Practice 页
SAE J1354-1995(R2002) Nomenclature - Forwarder 页
SAE J1355-1981(R1993) Test Method for Measuring Thickness of Resilient Insulating Paddings, Recommended Practice 页
SAE J1356-1988(R2002) Minimum Performance Criteria for Falling Object Guards for Excavators 页
SAE J1360-2006(R2006) Product Identification Numbering System of Off-Road Work Machines 页
SAE J1361-2001 Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials 页
SAE J1362-2003 Graphical Symbols for Operator Controls and Displays on Off-Road Self-Propelled Work Machines 页
SAE J1366-1994(R2000) Rating Lift Cranes Operating on Platforms in the Ocean Environment 页
SAE J1367-1981 Performance Test Procedure - Ball Joints and Spherical Rod Ends, Standard September 1981 页
SAE J1368-1993(R1997) Child Restraint Anchorages and Attachment Hardware 页
SAE J1369-1992(R1997) Anchorage Provisions for Installation of Child Restraint Tether Straps in Rear Seating Positions 页
SAE J1373-2006 Rear Cornering Lamps for Use on Motor Vehicles Less Than 9.1 m in Overall Length 页
SAE J1374-1985 Hydraulic Cylinder Rod Seal Endurance Test Procedure, Recommended Practice May 1985 页
SAE J1375-1997 Starter Motor Application Considerations 页
SAE J1377-1984(R1989) Transmission Mounted Vehicle Speed Signal Rotor Specification, Recommended Practice June 1984 页
SAE J1378-1998 Electric Hourmeter Specification 页
SAE J138-1969 Film Analysis Guides for Dynamic Studies of Test Subjects December 1969 页
SAE J1383-2005 (R) Performance Requirements for Replaceable Bulb Motor Vehicle Headlamps 页
SAE J1384-1993 (R) Vibration Performance Evaluation of Operator Seats, Standard June 1993 页
SAE J1386-1986 Classification of Agricultural Wheeled Tractors for Vibration Tests of Operator Seats, Recommended Practice January 1986 页
SAE J1388-2003 Personnel Protection - Skid Steer Loaders 页
SAE J1389-1982(R2001) Corrosion Test for Insulation Materials 页
SAE J1390-2003 Engine Cooling Fan Structural Analysis, Recommended Practice 页
SAE J139-1999 Ignition System Nomenclature and Terminology 页
SAE J1392-2001 (R) Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and Coated Sheet 页
SAE J1393-2004 (R) Heavy Duty Vehicle Cooling Test Code R Supersedes SAE J819 页
SAE J1394-2004 Metric Nonmetallic Air Brake System Tubing 页
SAE J1397-1992 Estimated Mechanical Properties and Machinability of Steel Bars, Information Report May 1992 页
SAE J1399-1984 Electric Tachometer Specification, Recommended Practice June 1984 页
SAE J1400-1990 (R) Laboratory Measurement of the Airborne Sound Barrier Performance of Automotive Materials and Assemblies, Recommended Practice 页
SAE J1401-2003 Road VehicleHydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids 页
SAE J140-1995 (R) Seat Belt Hardware Test Procedures June 1995 页
SAE J1402-2005 (R) Automotive Air Brake Hose and Hose Assemblies 页
SAE J1402-2006 Automotive Air Brake Hose and Hose Assemblies 页
SAE J1403-2005 Vacuum Brake Hose 页
SAE J1404-1993(R2000) Service Brake Structural Integrity Requirements - Vehicles over 4500 kg (10 000 lb) GVWR 页
SAE J1405-2005 Optional Test Procedures for Hydraulic Hose Assemblies 页
SAE J1406-2002 Application of Hydraulic Brake Hose to Motor Vehicles 页
SAE J1409-2004 (R) Air Brake Valves Test Procedure 页
SAE J1410-2004 (R) Air Brake ValvePerformance Requirements 页
SAE J141-1995 (R) Seat Belt Hardware Performance Requirements June 1995 页
SAE J1416-2001 Generator Terminal Labeling 页
SAE J1418-1987(R2002) Fuel Injection Pumps - High Pressure Pipes (Tubing) for Testing 页
SAE J1419-1993(R1999) Tapers for Shaft Ends and Hubs for Fuel Injection Pumps 页
SAE J1422-1996 Fuel Warmer-Diesel Engines, Information Report November 1996 页
SAE J1423-2003 (R) Classification of Energy-Conserving Engine Oil for Passenger Cars, Vans, Sport Utility Vehicles, and Light-Duty Trucks 页
SAE J1424-2002 (R) Cargo Lamps for Use on Vehicles Under 5443 kg (12 000 lb) GVWR 页
SAE J1428-2006 Marine Circuit Breakers 页
SAE J1432-2006 Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width 页
SAE J1434-1983(R1989) Wrought Aluminum Applications Guidelines, Information Report; June 1983 页
SAE J1436-2004 (R) Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests 页
SAE J1440-1993 (R) Off-Road Tire and Rim Classification- Forestry Machines, Recommended Practice September 1993 页
SAE J1441-1985(R1998) Subjective Rating Scale for Vehicle Handling 页
SAE J1442-2003 (R) High-Strength, Hot-Rolled Steel Bars 页
SAE J1444-2003 Procedure for Evaluating Transient Response of Small Engine Driven Generator Sets 页
SAE J1447-1986 Fire-Resistant Fluid Usage in Hydraulic Systems of Off-Road Work Machines, Information Report May 1986 页
SAE J1449-2002 Small CraftGraphic Symbols 页
SAE J1450-2001 Air Brake Actuator Diaphragm Test Procedure 页
SAE J1451-1985(R2000) Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Mopeds, and Bicycles) 页
SAE J1452-2002 Trailer Grade Parking Performance Test Procedure 页
SAE J1453-2002 Fitting - O-Ring Face Seal 页
SAE J1454-1995(R2006) Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines 页
SAE J1455-2006 (R) Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Applications 页
SAE J1456-1990(R1995) Maximum Allowable Rotational Speed for Internal Combustion Engine Flywheels, Recommended Practice 页
SAE J1459-2001 (R) V-Ribbed Belts and Pulleys 页
SAE J1460-1-1995(R2000) Human Mechanical Impact Response Characteristics - Dynamic Response of the Human Abdomen 页
SAE J1460-2-1998 (R) Human Mechanical Impact Response Characteristics - Response of the Human Neck to Inertial Loading by the Head for Automotive Seated Postures 页
SAE J1461-1991(R1998) Manual Slack Adjuster Test Procedure 页
SAE J1462-1994 (R) External Automatic Slack Adjuster Test Procedure, Recommended Practice May 1994 页
SAE J1463-2003 Pull-Type Clutch Transmission Installation Dimensions 页
SAE J1467-1993 (R) Clip Fastener Fitting, Standard June 1993 页
SAE J1468-2006 Application Testing of Oil-to-Air Oil Coolers for Heat Transfer Performance 页
SAE J1469-2006 Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers 页
SAE J1470-1998 (R) Measurement of Noise Emitted by Accelerating Highway Vehicles 页
SAE J1472-1998 (R) Braking Performance - Roller Compactors 页
SAE J1472-2006 Braking Performance - Rollers 页
SAE J1474-2003 Heavy-Duty Nonmetallic Engine Cooling FansMaterial, Manufacturing, and Test Considerations 页
SAE J1475-1996(R2004) Hydraulic Hose Fitting for Marine Applications 页
SAE J1476-1999 Parking Brake Structural Integrity Test Procedure Vehicles Over 4500 kg (10 000 lb) GVWR 页
SAE J1477-1986(R2000) Measurement of Interior Sound Levels of Light Vehicles 页
SAE J1479-1999 (R) Automotive Pull-Type Clutch Terminology 页
SAE J1487-2004 Rating Air-Conditioner Evaporator Air Delivery and Cooling Capacities 页
SAE J1488-1997 Emulsified Water/Fuel Separation Test Procedure 页
SAE J1489-2000 (R) Heavy Truck and Bus Retarder Downhill Performance Mapping Procedure May 2000 页
SAE J1490-1987(R1999) Measurement and Presentation of Truck Ride Vibrations, Recommended Practice January 1987 页
SAE J1491-2006 (R) Vehicle Acceleration Measurement 页
SAE J1492-1998 Measurement of Light Vehicle Stationary Exhaust System Sound Level Engine Speed Sweep Method 页
SAE J1493-1991(R1997) Shielding of Starter System Energization 页
SAE J1494-2001 (R) Battery Booster Cables 页
SAE J1495-1992(R2005) Test Procedure for Battery Flame Retardant Venting Systems 页
SAE J1497-1988(R1994) Design Guide for Formed-In-Place Gaskets, Recommended Practice 页
SAE J1498-2005 Heating Value of Fuels 页
SAE J1499-2005 SAE Band Friction Test Machine Guidelines 页
SAE J1502-1997 (R) Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic 页
SAE J1503-2004 Performance Test for Air-Conditioned, Heated, and Ventilated Off-Road, Self-Propelled Work Machines 页
SAE J1505-2004 Brake Force Distribution Test ProcedureTrucks and Buses 页
SAE J1508-1997 Hose Clamp Specifications 页
SAE J1510-1995(R2001) Lubricants for Two-Stroke-Cycle Gasoline Engines 页
SAE J151-1999 Pressure Relief for Cooling System 页
SAE J1512-1985(R2002) Manual Slack Adjuster Performance Requirements 页
SAE J1513-2004 External Automatic Slack Adjuster Performance Requirements 页
SAE J1515-1988(R1995) Impact of Alternative Fuels on Engine Test and Reporting Procedures, Information Report; 页
SAE J1516-1985(R1998) Accommodation Tool Reference Point 页
SAE J1517-1985(R1998) Driver Selected Seat Position 页
SAE J1518-2003 Three Point Hitch (Type A) Backhoe Personnel Protection 页
SAE J1521-1987(R1998) Truck Driver Shin-Knee Position for Clutch and Accelerator 页
SAE J1522-1985(R1998) Truck Driver Stomach Position 页
SAE J1523-1985(R1993) Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives, Recommended Practice 页
SAE J1524-1995 (R) Method of Viscosity Test for Automotive Type Adhesives, Sealers, and Deadeners, Recommended Practice August 1995 页
SAE J1525-1985 Lap Shear Test for Automotive Type Adhesives for Fiber Reinforced Plastic (FRP) Bonding, Recommended Practice June 1985 页
SAE J1526-1987 Joint TMC/SAE Fuel Consumption In-Service Test Procedure Type III, Recommended Practice June 1987 页
SAE J1527-2006 Marine Fuel Hoses 页
SAE J1528-1990 Fatigue Testing Procedure for Suspension -Leaf Springs, Recommended Practice June 1990 页
SAE J1529-1986 Overlap Shear Test for Automotive Type Sealant for Stationary Glass Bonding, Recommended Practice May 1986 页
SAE J1530-2003 (R) Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding of Automotive Carpet Materials 页
SAE J153-1987 Operator Precautions May 1987 页
SAE J1532-2005 (R) Transmission Oil Cooler Hose 页
SAE J1533-1993 Operator Enclosure Air Filter Element Test Procedure, Recommended Practice June 1993 页
SAE J1535-1996 Performance Test for Windshield Defrosting Systems for Off-Road, Self-Propelled Work Machines, Standard August 1996 页
SAE J1536-1995(R2001) Two-Stroke-Cycle Engine Oil Fluidity/Miscibility Classification 页
SAE J1537-1990 Validation Testing of Electric Fuel Pumps for Gasoline Fuel Injection Systems, Recommended Practice June 1990 页
SAE J1538-2001 (R) Glossary of Automotive Inflatable Restraint Systems 页
SAE J1540-1996(R2000) Manual Transmission Efficiency and Parasitic Loss Measurement 页
SAE J1541-2003 Fuel Injection Nomenclature - Spark Ignition Engines 页
SAE J1542-2003 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability 页
SAE J1544-1988 Revolutions per Mile and Static Loaded Radius for Off-Road Tires, Standard January 1988 页
SAE J1545-2005 (R) Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim 页
SAE J1549-1988 Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies, Recommended Practice April 1988 页
SAE J1553-1995 (R) Cross Peel Test for Automotive-Type Adhesives for Fiber- Reinforced Plastic (FRP) Bonding, Recommended Practice April 1995 页
SAE J1555-2000 Recommended Practice for Optimizing Automobile Damageability 页
SAE J1559-1995 Measurement of Solar Heating Effect July 1995 页
SAE J1561-2001 (R) Laboratory Speed Test Procedure for Passenger Car Tires 页
SAE J156-2005 Fusible Links 页
SAE J1562-1999 Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited) Coated Steel Sheet 页
SAE J1563-1993 (R) Guidelines for Laboratory Cyclic Corrosion Test Procedures for Painted Automotive Parts, Information Report October 1993 页
SAE J1568-1993(R2001) Materials for Plastic Pistons for Hydraulic Disc Brake Cylinders 页
SAE J1570-1991 (R) Rubber Dust Boots for the Hydraulic Disk Brake Piston 页
SAE J1573-2003 (R) OEM Plastic Parts Repair 页
SAE J1574-1-2000(R2005) Measurement of Vehicle and Suspension Parameters for Directional Control Studies 页
SAE J1574-2-2000(R2005) Measurement of Vehicle and Suspension Parameters for Directional Control Studies - Rationale 页
SAE J1577-1991 Replaceable Motorcycle Headlamp Bulbs, Recommended Practice June 1991 页
SAE J1578-2003 Motorcycle Side Stand Retraction Test Procedure 页
SAE J1579-1989(R1998) Motorcycle Side Stand Retraction Performance Requirements 页
SAE J1580-1989 Metric Countersunk Holes for Cutting Edges and End Bits, Standard December 1989 页
SAE J1581-1989(R2006) Cutting EdgeOptional Cross-Sections and Dimensions Loader Straight 页
SAE J1587-2002 Electronic Data Interchange Between Microcomputer Systems in Heavy-Duty Vehicle Applications 页
SAE J1588-1992(R1998) Internal Combustion Engines - Piston Rings - Vocabulary 页
SAE J1589-1992(R1998) Internal Combustion Engines - Piston Rings - Inspection Measuring Principles 页
SAE J1590-1992(R1998) Internal Combustion Engines - Piston Rings - Material Specifications 页
SAE J1591-1992(R1998) Internal Combustion Engines - Piston Rings - General Specifications 页
SAE J159-2002 (R) Rated Capacity System FSC 3810 页
SAE J1594-1987(R1994) Vehicle Aerodynamics Terminology 页
SAE J1596-1989 Automotive V-Ribbed Belt Drives and Test Methods, Recommended Practice June 1989 页
SAE J1597-1994(R1999) Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability 页
SAE J1598-1999 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability under Vibration-Induced Loading 页
SAE J1601-1997 (R) Rubber Cups for Hydraulic Actuating Cylinders 页
SAE J160-2001 (R) Dimensional Stability of Friction Materials When Exposed to Elevated Temperatures 页
SAE J1603-1995 Rubber Seals for Hydraulic Disc Brake Cylinders, Standard January 1995 页
SAE J1604-1995 (R) Rubber Boots for Drum-Type Hydraulic Brake Wheel Cylinders Standard January 1995 页
SAE J1605-1992 (R) Brake Master Cylinder Reservoir Diaphragm Gasket 页
SAE J1606-1997 Headlamp Design Guidelines for Mature Drivers 页
SAE J1608-1994(R2001) Manual Transmission Shift Patterns 页
SAE J1609-1997(R2002) Air Reservoir Capacity Performance Guide - Commercial Vehicles 页
SAE J1610-2001 Test Method for Evaluating the Sealing Capability of Hose Connections with a PVT Test Facility 页
SAE J1611-1998(R2004) Operator ControlsHorizontal Earthboring Machines 页
SAE J1614-1998 Wiring Distribution Systems for Construction, Agricultural, and Off-Road Work Machines 页
SAE J1615-2001 Thread Sealants 页
SAE J1616-1994 Recommended Practice for Compressed Natural Gas Vehicle Fuel, Recommended Practice February 1994 页
SAE J1617-1993 Body Corrosion - A Comprehensive Introduction, Information Report November 1993 页
SAE J1618-1994(R2000) Continuously Variable Transmission Test Code for Passenger Cars 页
SAE J1619-1997 Single Tooth Gear Bending Fatigue Test 页
SAE J1621-1994(R2005) Engine Retarder Dynamometer Test and Capability Rating Procedure 页
SAE J1623-1994 All-Terrain Vehicle Headlamps, Recommended Practice February 1994 页
SAE J1624-2000 Fuel Crossover Line 页
SAE J1624-2000(R2006) Fuel Crossover Line 页
SAE J1625-2004 Heavy-Duty Circuit Breakers April 1996 页
SAE J1626-1999 (R) Braking, Stability, and Control Performance Test Procedures for Air-Brake-Equipped Trucks, Truck-Tractors and Buses 页
SAE J1627-1995 (R) Performance Criteria for Electronic Refrigerant Leak Detectors, Standard August 1995 页
SAE J1628-1993(R1998) Technician Procedure for Using Electronic Refrigerant Leak Detectors for Service of Mobile Air-Conditioning Systems 页
SAE J1630-2001 Driver or Passenger Airbag Module Deployment Test Procedure 页
SAE J163-2006 Low Tension Wiring and Cable Terminals and Splice Clips 页
SAE J1633-1995(R2000) Laboratory Speed Test Procedure for Light Truck Tires 页
SAE J1636-1993 Recommended Guidelines for Load/Deformation Testing of Elastomeric Components, Recommended Practice February 1993 页
SAE J1637-1993 Laboratory Measurement of the Composite Vibration Damping Properties of Materials on a Supporting Steel Bar, Recommended Practice February 1993 页
SAE J1638-2004 Compression Set of Hoses or Solid Discs 页
SAE J1639-1995 (R) Classification System for Automotive Polyamide (PA) Plastics, Recommended Practice May 1995; Replaces ESB-M4D574-A, 178-A2, 264-A, 304-A, 314-B, 353-A7, 423-A2; ESA-M4D574-A2, 349-A; ESH-M4D287-C; ESP-M4D344-A; ESF-M4D78-A, 314-A, 426-A, 429-A7, 353 页
SAE J164-2005 Radiator Caps and Filler Necks 页
SAE J1644-1998 Metallic Tube Connections for Fluid Power and General Use - Test Methods for Threaded Hydraulic Fluid Power Connectors 页
SAE J1645-1999 (R) Fuel System - Electrostatic Charge 页
SAE J1645-2006 (R) Fuel Systems and ComponentsElectrostatic Charge Mitigation 页
SAE J1646-1996 Glossary of Terms - Lubricated Friction Systems, Recommended Practice July 1996 页
SAE J1646-2006 Glossary of TermsLubricated Friction Systems 页
SAE J1647-1995 Plastic Materials and Coatings for Use in or on Optical Parts Such as Lenses and Reflectors of High-Intensity Discharge Forward Lighting Devices Used in Motor Vehicles, Recommended Practice March 1995 页
SAE J1648-1996 Protective Coatings for Fasteners, Information Report August 1996 页
SAE J1650-1997 (R) Seamless Copper-Nickel 90-10 Tubing 页
SAE J1651-1994 Metric Yoke Type Rod Ends, Standard 页
SAE J1654-2004 High Voltage Primary Cable 页
SAE J1655-1996 Predictive and Preventive Diagnostic Maintenance of Hydraulic Systems, Information Report August 1996 页
SAE J1657-1993(R1999) Selection Criteria for Retrofit Refrigerants to Replace CFC-12 (R-12) in Mobile Air-Conditioning Systems 页
SAE J1658-1993(R1999) Alternate Refrigerant Consistency Criteria for Use in Mobile Air-Conditioning Systems 页
SAE J1659-1993(R1999) Vehicle Testing Requirements for Replacement Refrigerants for CFC-12 (R-12) Mobile Air-Conditioning Systems 页
SAE J1660-1993(R1998) Fittings and Labels for Retrofit of CFC-12 (R-12) Mobile Air-Conditioning Systems to HFC-134a (R-134a) 页
SAE J1661-1998 Procedure Retrofitting CFC-12 (R-12) Mobile Air-Conditioning Systems to HFC-134a (R-134a) 页
SAE J1662-1993(R1998) Compatibility of Retrofit Refrigerants with Air-Conditioning System Materials 页
SAE J1663-1995 Truth-in-Labeling Standard for Navigation Map Databases, Standard August 1995 页
SAE J1667-1996 Snap-Acceleration Smoke Test Procedure for Heavy-Duty Diesel Powered Vehicles, Recommended Practice February 1996 页
SAE J1668-1993(R1999) Diesel Engines - Fuel Injection Pump Testing 页
SAE J1670-2005 Type"F" Clamps for Plumbing Applications 页
SAE J1671-2006 Outboard Mounted Brake Drum/Disc Wheel Hub Interface DimensionsTruck and Bus 页
SAE J167-1992(R2002) Overhead Protection for Agricultural Tractors Test Procedures and Performance Requirements 页
SAE J1673-1996 High Voltage Automotive Wiring Assembly Design, Recommended Practice July 1996 页
SAE J1674-1998 Early Acquisition and Preservation of Information in a Motor Vehicle Accident 页
SAE J1677-2004 (R) Tests and Procedures for Steel and Copper Nickel Tubing 页
SAE J1678-2004 Low-Voltage Ultrathin Wall Primary Cable 页
SAE J1679-1994 Peel Strength of Soft Trim Adhesives, Recommended Practice April 1994 页
SAE J1681-2000 (R) Gasoline, Alcohol, and Diesel Fuel Surrogates for Material Testing 页
SAE J1682-1993 Valve Guide Information Report, Information Report September 1993 页
SAE J1684-2005 Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials 页
SAE J1689-1994 Hydraulic Power Units Used on Machine Tools and Equipment for the Automotive Industry, Standard November 1994 页
SAE J1690-1996 Flashers, Recommended Practice 08 1996 页
SAE J1691-1997 Plastic Motor Vehicle Safety Glazing - Tolerances and Fabrication Details 页
SAE J169-1985 Design Guidelines for Air Conditioning Systems for Off-Road Operator Enclosures March 1985 页
SAE J1692-1993 Valve Seat Insert Information Report, Information Report Supersedes Ford ESE-M1A106-A, ESE-M1A122-A 页
SAE J1693-1994 Remanufactured Hydraulic Master Cylinder for Motor Vehicle Brakes - General Characteristics and Test Procedure, Recommended Practice June 1994 页
SAE J1694-1994 Remanufactured Hydraulic Master Cylinder for Motor Vehicle Brakes - Performance Requirements, Recommended Practice June 1994 页
SAE J1696-1997 Standard Fuel Filter Test Fluid 页
SAE J1697-2003 Recommended Practices for Design and Evaluation of Passenger and Light Truck Coolant Hose Clamped Joints 页
SAE J1698-1-2005 Vehicle Event Data InterfaceOutput Data Definition 页
SAE J1698-2005 (R) Vehicle Event Data InterfaceVehicular Output Data Definition 页
SAE J1698-2-2004 Vehicle Event Data Interface Vehicular Data Extraction 页
SAE J1699-1-2001(R2006) SAE J1850 Verification Test Procedures 页
SAE J1699-2-1998 OBD-II Related SAE Specification Verification Test Procedures 页
SAE J1699-3-2006 OBD II Compliance Test Cases 页
SAE J1700-1994 Softening Point of Interior Trim Adhesives, Recommended Practice April 1994 页
SAE J1701-1999 Torque-Tension Tightening for Inch Series Fasteners 页
SAE J1701M-1996 Torque-Tension Tightening for Metric Series Fasteners, Information Report July 1996 页
SAE J1702-1994(R2002) Self-Propelled Sweepers Sweep-Ability Performance 页
SAE J1703-2004 Motor Vehicle Brake Fluid 页
SAE J1704-2006 Borate Ester Based Brake Fluids 页
SAE J1705-1995 Low Water Tolerant Brake Fluids, Recommended Practice May 1995 页
SAE J1706-1995 (R) Production, Handling and Dispensing of SAE J1703 Motor Vehicle Brake Fluids, Recommended Practice June 1995 页
SAE J1707-2002 Service Maintenance of SAE J1703 and J1704 Brake Fluids in Motor Vehicle Brake Systems 页
SAE J1708-2004 Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications 页
SAE J1711-1999 Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles 页
SAE J1713-2004 Structural Testing of Passenger Car and Truck Disc Brakes 页
SAE J1715-2000 Electric Vehicle Terminology 页
SAE J1717-1994 Interior Automotive Plastic Part Testing, Recommended Practice June 1994 页
SAE J1718-1997 (R) Measurement of Hydrogen Gas Emission from Battery-Powered Passenger Cars and Light Trucks During Battery Charging 页
SAE J17-2003 Latex Foam Rubbers 页
SAE J1723-1995 Supercharger Testing Standard, Standard August 1995 页
SAE J1725-1995(R1999) Structural Modification for Personally Licensed Vehicles to Meet the Transportation Needs of Persons with Disabilities 页
SAE J1726-2000 (R) Air-to-Air Charge Air Cooler (CAC) Internal Cleanliness 页
SAE J1727-1996 Injury Calculations Guidelines, Information Report August 1996 页
SAE J1729-2001 (R) Parking Brake Drawbar Pull Test Procedure - Commercial Vehicle 页
SAE J1730-2004 ABS Excitor Ring Location Standardization 页
SAE J1731-2001 Pilot Bearings for Truck and Bus Applications 页
SAE J1732-1998 HFC-134a (R-134a) Refrigerant Recovery Equipment for Mobile Automotive Air-Conditioning Systems 页
SAE J1733-1994 Sign Convention for Vehicle Crash Testing, Information Report December 1994 页
SAE J1735-1995 Harmonized Vehicle Headlamp Performance Requirements, Recommended Practice January 1995 页
SAE J1737-2004 Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation 页
SAE J1739-2002 (R) Potential Failure Mode and Effects Analysis in Design (Design FMEA), Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA), and Potential Failure Mode and Effects Analysis for Machinery (Machinery FMEA) 页
SAE J1741-1999 Discriminating Back-Up Alarm System Standard 页
SAE J174-1996(R1998) Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series 页
SAE J1742-2005 (R) Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses Test Methods and General Performance Requirements 页
SAE J1744-1994 280 Relay Footprint, Standard June 1994 页
SAE J1746-1999 ISP-Vehicle Location Referencing Standard 页
SAE J1747-1994 Recommended Methods for Conducting Corrosion Tests in Gasoline/Methanol Fuel Mixtures, Information Report December 1994 页
SAE J1748-1998 Methods for Determining Physical Properties of Polymeric Materials Exposed to Gasoline/Oxygenated Fuel Mixtures 页
SAE J174M-1996(R1998) (R) Torque-Tension Test Procedure for Steel Threaded Fasteners - Metric Series 页
SAE J1750-1995 Describing and Evaluating the Truck Driver? Viewing Environment, Recommended Practice March 1995 页
SAE J1751-1995 Lubrication Components and Systems Used on Machine Tools and Equipment for the Automotive Industry, Recommended Practice December 1995 页
SAE J175-1996(R2003) Wheels - Impact Test Procedures - Road Vehicles 页
SAE J1752-1-1997 Electromagnetic Compatibility Measurement Procedures for Integrated Circuits - Integrated Circuit EMC Measurement Procedures - General and Definitions 页
SAE J1752-2-2003 (R) Measurement of Radiated Emissions from Integrated CircuitsSurface Scan Method (Loop Probe Method) 10 MHz to 3 GHz 页
SAE J1752-3-2003 (R) Measurement of Radiated Emissions from Integrated CircuitsTEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz) 页
SAE J1754-1-2001 (R) Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document 页
SAE J1754-2-2006 Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 2: Ordering Information 页
SAE J1755-1995 Guidelines for Usage of Stainless Steel and Bimetal for Exterior Automotive Bright Trim, Recommended Practice January 1995 页
SAE J1756-1994 Test Procedure to Determine the Fogging Characteristics of Interior Automotive Materials, Recommended Practice December 1994; Replaces FLTM BO 116-03 页
SAE J1756-2006 (R) Determination of the Fogging Characteristics of Interior Automotive Materials 页
SAE J1757-1-2002 Standard Metrology for Vehicular Displays 页
SAE J1759-2000(R2006) SAE Hose Measurement Study 页
SAE J1760-2001 Data Security Services 页
SAE J176-1994 (R) Fast Fill Fueling Installation for Off-Road Self-Propelled Work Machines December 1994 页
SAE J176-2006 (R) Fast Fill Fueling Installation for Off-Road Self-Propelled Work Machines 页
SAE J1765-1995 SAE Miniature Bulb Vibration Test, Recommended Practice May 1995 页
SAE J1765-2006 SAE Miniature Bulb Vibration Test 页
SAE J1766-2005 (R) Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing 页
SAE J1767-1995 Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials, Recommended Practice January 1995 页
SAE J1770-1995 Automotive Refrigerant Recovery/Recycling Equipment Intended for Use with Both R12 and R134a, Standard October 1995 页
SAE J1771-1998 Criteria for Refrigerant Identification Equipment for Use with Mobile Air-Conditioning Systems 页
SAE J1772-2001 (R) SAE Electric Vehicle Conductive Charge Coupler 页
SAE J1773-1999 (R) SAE Electric Vehicle Inductive Coupled Charging 页
SAE J1774-2004 Design Guidelines for Fiberboard Materials 页
SAE J1775/ HIR 1559A-1984(R2004) Bleed-Air Pneumatic Systems for Gas Turbine Equipped Marine and Amphibious Craft 页
SAE J1776-2005 (R) Marine VehiclesHydraulic PumpsDesign and Specification Guide Superseding J1776/HIR1514A 页
SAE J1777/ HIR 1063B-1990 (R) General Environmental Considerations for Marine Vehicles, Information Report 页
SAE J1778-1998 (R) Ship Systems and Equipment - Recommended Practice for Hydraulic Fluid Selection 页
SAE J1779-2003 (R) Ship Systems and Equipment Hydraulic System Design Criteria for Marine Vehicles 页
SAE J1780/ HRP 4382-1991 Hydraulic System Diagrams and Associated Tables for Marine Vehicles 页
SAE J1781/ HIR 1694-1982(R1987) Materials for Fluid Systems of Marine Vehicles 页
SAE J1782-2000 (R) Ship Systems and Equipment - Hydraulic Systems - Noise Control Supersedes J 1782/HIR 1622A-1986 (R1992) 页
SAE J1783-2002 (R) Ship Systems and EquipmentSelection of Hydraulic Directional Control Valves 页
SAE J1787-2005 Measurement of the Total Ash Content of Aviation Piston Engine Oils by a Calculation Method 页
SAE J1789-2002 Self-Propelled Sweepers and Scrubbers Braking Performance 页
SAE J1790-1998(R2003) Self-Propelled Sweepers and Scrubbers Steering Requirements Single-Circuit Hydraulic Servo-Assisted Systems 页
SAE J1791-2002 Self-Propelled Sweepers and Scrubbers Dual Position Driving Controls and Displays 页
SAE J179-2001 Labeling - Disc Wheels and Demountable Rims - Trucks 页
SAE J1792-1-2002 Self-Propelled Sweepers - Air Flow Performance Part 1: Suction Air Volume Performance 页
SAE J1792-2-2002 Self-Propelled Sweepers - Air Flow Performance Part 2: Suction/Blower Fan Performance 页
SAE J1793-1999 Self-Propelled Sweepers and Scrubbers Tank and Hopper Capacity Rating 页
SAE J1794-1996 SAE Restraint Systems Effluent Test Procedure 页
SAE J1796-2005 Spectral Transmission Test 页
SAE J1797-1997 Recommended Practice for Packaging of Electric Vehicle Battery Modules 页
SAE J1798-1997 Recommended Practice for Performance Rating of Electrical Vehicle Battery Modules 页
SAE J1800-1987 Method for Evaluating the Paintable Characteristics of Automotive Sealers, Recommended Practice April 1987 页
SAE J1801-1993(R2000) Brake Effectiveness Marking for Brake Blocks 页
SAE J180-2002 (R) Electrical Charging Systems for Off Highway Work Machines 页
SAE J1802-1-2003 Test Component Specifications 页
SAE J1802-2001 Brake Block Effectiveness Rating 页
SAE J1803-1997 Seat Belt Restraint System Hardware - Glossary of Terms 页
SAE J1804-1989 Corrosion Preventive Compound, Topside Vehicle Corrosion Protection, Standard June 1989 页
SAE J1805-2003 Sound Power Level Measurements of Work Machines Static and In-Place Dynamic Methods 页
SAE J1806-1999 (R) Clutch Dimensions for Truck and Bus Applications 页
SAE J1807-2000 Hydraulic Power Assist Brake Booster Test Procedure 页
SAE J1808-1989 Vacuum Power Assist Brake Booster Test Procedure, Standard October 1989 页
SAE J1810-2002 (R) Electrical Indicating System Specification 页
SAE J1811-2002 Power Cable Terminals 页
SAE J1812-2003 Function Performance Status Classification for EMC Immunity Testing 页
SAE J1814-1993(R2003) Operator ControlsOff-Road Machines 页
SAE J1817-2001 Long-Stroke Air-Brake Actuator Marking 页
SAE J1819-1994(R1999) Securing Child Restraint Systems in Motor Vehicles 页
SAE J182-1997(R2005) Motor Vehicle Fiducial Marks and Three-dimensional Reference System 页
SAE J1824-1991(R2004) Specification Definitions - Clam Bunk Skidder 页
SAE J1825-2005 Shelf Storage of Hydraulic Brake Components 页
SAE J1826-1989(R1995) Turbocharger Gas Stand Test Code, Recommended Practice; 页
SAE J1828-1996 (R) Uniform Reference and Dimensional Guidelines for Collision Repair 页
SAE J1829-1992(R1997) Stoichiometric Air-Fuel Ratios of Automotive Fuels 页
SAE J1830-1987 Size Classification and Characteristics of Ceramic Shot for Peening, Recommended Practice May 1987 页
SAE J183-2006 (R) Engine Oil Performance and Engine Service Classification (Other than ?nergy Conserving? 页
SAE J1832-2001 Low Pressure Gasoline Fuel Injector 页
SAE J1834-1991(R2000) Seat Belt Comfort, Fit, and Convenience 页
SAE J1835-1999(R2004) Fastener Hardware for Wheels for Demountable Rims 页
SAE J1836-1988 Overlap Shear Test for Sealant Adhesive Bonding of Automotive Glass Encapsulating Material to Body Opening, Recommended Practice October 1988 页
SAE J1837-1991 Electroplate Requirements for Decorative Chromium Deposits on Zinc Base Materials Used for Exterior Ornamentation, Standard June 1991 页
SAE J1839-1997 Coarse Droplet Water/Fuel Separation Test Procedure 页
SAE J184-1998 (R) Qualifying a Sound Data Acquisition System 页
SAE J1842-2004 (R) Disc Wheel Hub/Spoke Wheel and Axle Interface DimensionsCommercial Vehicles 页
SAE J1843-1993 Accelerator Pedal Position Sensor for Use with Electronic Controls in Medium- and Heavy-Duty Vehicle Applications, Recommended Practice April 1993 页
SAE J1846-2003 Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing 页
SAE J1847-1989 Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping, Recommended Practice June 1989 页
SAE J1849-2002 (R) Emergency Vehicle Sirens 页
SAE J1850-2001(R2006) Class B Data Communications Network Interface 页
SAE J1851-1987 Induction Cure Test for Metal Bonding Adhesives, Recommended Practice May 1987 页
SAE J185-1988(R2003) Access Systems for Off-Road Machines 页
SAE J1853-1987(R2000) Hand Winches - Boat Trailer Type 页
SAE J1854-2003 (R) Brake Force Distribution Performance GuideTruck and Bus 页
SAE J1855-2001 (R) Deployment of Electrically Activated Automotive Air Bags for Automobile Reclamation 页
SAE J1857-2003 Flywheel Dimensions for Truck and Bus Applications 页
SAE J1859-2003 Test Procedures for Determining Air Brake Valve Input-Output Characteristics 页
SAE J1860-2003 Labeling Air Brake Valves with Their Performance (Input-Output) Characteristics 页
SAE J1861-1994(R2001) Air Brake Valve Input-Output Characteristic Requirements 页
SAE J1862-2000 (R) Fuel Injection System Fuel Pressure Regulator and Pressure Damper 页
SAE J1863-1987(R1993) Coach Joint Fracture Test, Recommended Practice April 1987 页
SAE J1864-1987(R1996) Method for Evaluating Material Separation in Automotive Sealers under Pressure in Static Conditions, Recommended Practice 页
SAE J1865-1999 Dimensional Compatibility for Commercial Vehicles Fitment of Complete Wheels 页
SAE J1868-1993 (R) Restricted Hardenability Bands for Selected Alloy Steels, Standard September 1993 页
SAE J187-1970 Truck Vehicle Identification Numbers October 1970 页
SAE J1873-2003 Moisture Transmission Test ProcedureHydraulic Brake Hose Assemblies 页
SAE J1875-1993(R2001) Materials for Plastic Check Valves for Vacuum Booster Systems 页
SAE J1876-1990(R2001) Plastic Dust Shield for Hydraulic Disc Brakes 页
SAE J1877-1988(R1994) Recommended Practice for Bar-Coded Vehicle Identification Number Label, Recommended Practice 页
SAE J1879-1988 General Qualification and Production Acceptance Criteria for Integrated Circuits in Automotive Applications, Recommended Practice October 1988 页
SAE J188-2003 Power Steering Pressure Hose - High Volumetric Expansion Type 页
SAE J1883-1988(R1994) Elastomeric Bushing"TRAC" Application Code, Recommended Practice 页
SAE J1885-2005 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus 页
SAE J1887-2002 Automotive Compacted Graphite Iron Castings 页
SAE J1888-1990 High Current Time Lag Electric Fuses, Standard November 1990 页
SAE J1889-2005 L.E.D. Signal and Marking Lighting Devices 页
SAE J1890-1988(R2000) Performance Assurance of Remanufactured, Hydraulically- Operated Rack and Pinion Steering Gears 页
SAE J189-2003 Power Steering Return Hose - Low Pressure 页
SAE J1892-1998 (R) Recommended Practice for Bar-Coded Vehicle Emission Configuration Label 页
SAE J1899-2005 Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant) 页
SAE J190-1998 Power Steering Pressure Hose - Wire Braid August 1970 页
SAE J1903-1997 (R) Automotive Adaptive Driver Controls, Manual 页
SAE J1907-1988 Peel Adhesion Test for Glass to Elastomeric Material for Automotive Glass Encapsulation, Recommended Practice 页
SAE J1908-2002 (R) Electrical Grounding Practice 页
SAE J1911-2003 Test Procedure for Air Reservoir Capacity - Highway Type Vehicles 页
SAE J191-2003 Power Steering Pressure Hose - Low Volumetric Expansion Type 页
SAE J1915-1990(R2000) Recommended Remanufacturing Procedures for Manual Transmission Clutch Assemblies 页
SAE J1916-1989 Engine Water Pump Remanufacture Procedures and Acceptance Criteria, Recommended Practice May 1989 页
SAE J1918-2002 (R) Method for the Determination of Expansion and Water Absorption of Automotive Sealers 页
SAE J192-2003 (R) Maximum Exterior Sound Level for Snowmobiles 页
SAE J1922-1995(R2000) Powertrain Control Interface for Electronic Controls Used in Medium and Heavy-Duty Diesel On-Highway Vehicle Applications 页
SAE J1927-2001 Cumulative Damage Analysis for Hydraulic Hose Assemblies 页
SAE J1928-2005 Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications 页
SAE J1930-2002 Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and AcronymsEquivalent to ISO/TR 15031-2:April 30, 2002 页
SAE J193-1987(R1996) Ball Stud and Socket Assembly - Test Procedures 页
SAE J1938-1998 (R) Design/Process Checklist for Vehicle Electronic Systems 页
SAE J1939-01-2000 Recommended Practice for Control and Communication Newtwork for On-Highway Equipment 页
SAE J1939-02-2006 Agricultural and Forestry Off-Road Machinery Control and Communication Network 页
SAE J1939-11-1999 Physical Layer, 250K bits/s, Twisted Shielded Pair 页
SAE J1939-11-2006 Physical Layer, 250K bits/s, Twisted Shielded Pair 页
SAE J1939-13-2004 Off-Board Diagnostic Connector 页
SAE J1939-15-2003 Reduced Physical Layer, 250K bits/sec, Un-Shielded Twisted Pair (UTP) 页
SAE J1939-2005 (R) Recommended Practice for a Serial Control and Communications Vehicle Network 页
SAE J1939-21-2001 Data Link Layer 页
SAE J1939-31-2004 Network Layer 页
SAE J1939-71-2006 Vehicle Application Layer (through December 2004) 页
SAE J1939-73-2004 Application Layer - Diagnostics 页
SAE J1939-73-2006 Application Layer - Diagnostics 页
SAE J1939-74-2004 ApplicationConfigurable Messaging 页
SAE J1939-75-2006 Application Layer - Generator Sets and Industrial 页
SAE J1939-81-2003 NETWORK MANAGEMENT 页
SAE J1940-2002 (R) Small Engine Power and Torque Rating Procedure 页
SAE J1941-1990 Coolant Concentrate (Low Silicate, Ethylene Glycol Type Requiring an Initial Charge of Supplemental Coolant Additive) for Heavy-Duty Engines 页
SAE J1942-1-2005 Qualified Hoses for Marine Applications 页
SAE J1942-2002 Hose and Hose Assemblies for Marine Applications 页
SAE J1944-1991(R2000) Truck and Bus Multipurpose Vehicle Windshield Washer System 页
SAE J1945-2000 Cross-Tooth Companion Flanges, Type T 页
SAE J1946-2001 Companion Flanges, Type A (External Pilot) and Type S (Internal Pilot) 页
SAE J1948-1989(R2003) Cab Sleeper Occupant Restraint System Test 页
SAE J1949-1988 Road Vehicles - High Pressure Fuel Injection Pipe End-Connections with 60 Degree Female Cone, Standard; October 1988 (ISO/DIS 2974) 页
SAE J1950-1989 Proving Ground Vehicle Corrosion Testing, Information Report May 1989 页
SAE J195-1970(R1988) Automatic Vehicle Speed Control - Motor Vehicles 页
SAE J1952-2003 (R) All-Wheel Drive Systems Classification 页
SAE J1953-2001 Brake-Stroke Indicator Design Guideline for Cam or Disc Air-Brake Actuators 页
SAE J1957-2000 (R) Center High Mounted Stop Lamp Standard for Vehicles Less Than 2032 mm Overall Width 页
SAE J1958-1989(R2002) Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing) 页
SAE J1959-1989(R2003) Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection Superseding J1969 JUN1998 页
SAE J1960-2004 Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-cooled Xenon Arc Apparatus 页
SAE J1961-2002 (R) Accelerated Exposure of Automotive Exterior Materials Using A Solar Fresnel Reflector Apparatus 页
SAE J1962-2002 (R) Diagnostic Connector Equivalent to ISO/DIS 15031-3:December 14, 2001 页
SAE J1965-2003 Road Vehicles - Wheels for Commercial Vehicles and Multipurpose Passenger Vehicles - Fixing Nuts - Test Methods 页
SAE J1966-2005 Lubricating Oils, Aircraft Piston Engine (Non-Dispersant Mineral Oil) 页
SAE J1967-2006 Retroreflective Materials for Vehicle Conspicuity 页
SAE J1969-1988 Electrocoat Compatibilities of Automotive Sealers, Recommended Practice October 1988 页
SAE J1970-2003 Shoreline Sound Level Measurement Procedure for Recreational Motorboats 页
SAE J1973-1991 Personal Watercraft - Flotation, Recommended Practice April 1991 页
SAE J1974-1993 Decorative Anodizing Specification for Automotive Applications, Recommended Practice June 1993 页
SAE J1975-1997 Case Hardenability of Carburized Steels 页
SAE J1976-2002 (R) Outdoor Weathering of Exterior Materials 页
SAE J1977-1997 Braking Performance - Rubber-Tired, Self-Propelled Cranes 页
SAE J1978-2002 OBD II Scan Tool Equivalent to ISO/DIS 15031-4:December 14, 2001 页
SAE J1979-2002 (R) E/E Diagnostic Test Modes Equivalent to ISO/DIS 15031-5:April 30, 2002 页
SAE J1980-2001 (R) Guidelines for Evaluating Out-of-Position Vehicle Occupant Interactions with Deploying Airbags 页
SAE J1981-2005 Road Hazard Impact Test for Wheel and Tire Assemblies (Passenger Car, Light Truck, and Multipurpose Vehicles) 页
SAE J198-2003 Windshield Wiper SystemsTrucks, Buses, and Multipurpose Vehicles 页
SAE J1982-1998 (R) Nomenclature - Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles 页
SAE J1984-1995(R2002) Diesel Fuel Injector Assembly Type 28 (9.5 mm) (This Document References ISO 2698) 页
SAE J1985-1993 Fuel Filters - Initial Single-Pass Efficiency Test Method, Standard October 1993 页
SAE J1985-2006 (R) Fuel FilterInitial Single-Pass Efficiency Test Method 页
SAE J1986-2006 Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations 页
SAE J1987-1998 Force and Movement Test Method 页
SAE J1988-1994 Residual Aligning Moment Test, Recommended Practice August 1994 页
SAE J1989-1998 Recommended Service Procedure for the Containment of CFC-12 (R-12) 页
SAE J1990-1999 Recovery and Recycle Equipment for Mobile Automotive Air-Conditioning Systems 页
SAE J1991-1999 Standard of Purity for Use in Mobile Air-Conditioning Systems October 1989 页
SAE J1992-2001 (R) Wheels/Rims - Military Vehicles - Test Procedures and Performance Requirements 页
SAE J1993-1996(R2005) High-Carbon Cast-Steel Grit 页
SAE J1994-2004 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Heat Transfer Performance 页
SAE J1995-1990(R1995) Engine Power Test Code - Spark Ignition and Compression Ignition - Gross Power Rating, Standard; 页
SAE J1996-1992(R1998) Internal Combustion Engines - Piston Rings - Quality Requirements 页
SAE J1997-1992(R1998) Internal Combustion Engines - Piston Rings - Rectangular Rings 页
SAE J1998-1992(R1998) Internal Combustion Engines - Piston Rings - Rectangular Rings with Narrow Ring Width 页
SAE J1999-1992(R1998) Internal Combustion Engines - Piston Rings - Scraper Rings 页
SAE J2000-1998 Internal Combustion Engines - Piston Rings - Keystone Rings 页
SAE J2001-1992(R1998) Internal Combustion Engines - Piston Rings - Half Keystone Rings 页
SAE J200-2005 Classification System for Rubber Materials Replaces SAE J14/ASTM D 735 页
SAE J2002-1992(R1998) Internal Combustion Engines - Piston Rings - Oil Control Rings 页
SAE J2003-1992(R1998) Internal Combustion Engines - Piston Rings Coil Spring Loaded Oil Control Rings 页
SAE J2004-1992(R1998) Internal Combustion Engines - Piston Rings - Expander/Segment Oil Control Rings 页
SAE J2005-2004 Stationary Sound Level Measurement Procedure for Recreational Motorboats 页
SAE J2006-2003 Marine Exhaust Hose 页
SAE J2009-2005 (R) Discharge Forward Lighting System and Subsystems 页
SAE J201-1976(R1997) In-Service Brake Performance Test Procedure Passenger-Car and Light-Duty Truck 页
SAE J20-1-2002 Coolant Hose Supplement to SAE J20 for Goverment Use Replacing Part of MS521130 页
SAE J2012-2002 (R) Diagnostic Trouble Code Definitions Equivalent to ISO/DIS 15031-6:April 30, 2002 页
SAE J2013-1991 Military Tire Glossary, Recommended Practice May 1991 页
SAE J2014-2001 (R) Pneumatic Tires for Military Tactical Wheeled Vehicles FSC 2610 页
SAE J2016-1999 (R) Chemical Stress Resistance of Polymers 页
SAE J2017-1995 (R) Guidelines for the Development of Performance-Based Technician Training Programs, Recommended Practice July 1995 页
SAE J2018-1989 Assessing Technician Training, Recommended Practice July 1989 页
SAE J2019-1994 Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus, Standard January 1994 页
SAE J20-2006 Coolant System Hoses 页
SAE J2020-2003 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus 页
SAE J20-2-2001 Coolant Hose - Normal Service Type Convoluted, Wire Support Hose (Supplement to SAE J20 for Government Use Replacing Part of MS51008) 页
SAE J2022-2000 Classification, Nomenclature, and Specification Definitions for Horizontal Earthboring Machines 页
SAE J2024-1993(R2001) Contaminants for Testing Air Brake Components and Auxiliary Pneumatic Devices 页
SAE J2025-1989 Method for Evaluating the Flow Properties of Pumpable Sealers, Recommended Practice June 1989 页
SAE J2027-1998 (R) Standard for Protective Covers for Gasoline Fuel Line Tubing 页
SAE J2028-2000(R2005) Front-Wheel-Drive Constant Velocity Joint Boot Seals 页
SAE J2030-2002 (R) Heavy-Duty Electrical Connector Performance Standard 页
SAE J2031-2001 High Tension Ignition Cable 页
SAE J2032-2000 (R) Ignition Cable Assemblies 页
SAE J2034-1993 Personal Watercraft Ventilation Systems, Recommended Practice January 1993 页
SAE J2039-2001 Side Turn Signal Lamps for Long Vehicles 页
SAE J2040-2002 Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width 页
SAE J2041-1999(R2004) Reflex Reflectors for Use on Vehicles 2032 mm or More in Overall Width 页
SAE J2042-2003 Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width 页
SAE J2044-2002 Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems 页
SAE J2045-1998 (R) Performance Requirements for Fuel System Tubing Assemblies 页
SAE J2046-1993 Personal Watercraft Fuel Systems, Recommended Practice January 1993 页
SAE J2047-1998 Tire Performance Technology 页
SAE J2050-2001 High-Temperature Power Steering Pressure Hose 页
SAE J2051-2005 Qualifications for Four-Way Subbase Mounted Air Valves for Automotive Manufacturing Applications 页
SAE J2052-1997(R2005) Test Device Head Contact Duration Analysis 页
SAE J2053-1994 Brake Master Cylinder Plastic Reservoir Assembly for Road Vehicles, Recommended Practice June 1994 页
SAE J2053-2006 (R) Brake Master Cylinder Plastic Reservoir Assembly for Road Vehicles 页
SAE J2056-3-1991(R2000) Selection of Transmission Media 页
SAE J2057-1-1997 (R) Class A Application/Definition 页
SAE J2057-1-1997(R2006) Class A Application/Definition 页
SAE J2057-2-2001 Class A Multiplexing Actuators 页
SAE J2057-2-2001(R2006) Class A Multiplexing Actuators 页
SAE J2057-3-1993(R2001) Class A Multiplexing Sensors 页
SAE J2057-3-1993(R2006) Class A Multiplexing Sensors 页
SAE J2057-4-1993(R2001) Class A Multiplexing Architecture Strategies 页
SAE J2057-4-1993(R2006) Class A Multiplexing Architecture Strategies 页
SAE J2059-1992 All-Wheel-Drive Drivetrain Schematic Symbol Standards 页
SAE J2064-2005 R134a Refrigerant Automotive Air-Conditioned Hose 页
SAE J2066-1994 Filter and Filter Element for Hydraulic System(s) Used on Manufacturing and Assembly Equipment, Standard February 1994 页
SAE J2069-2001 Recovery Attachment Points for Passenger Cars, Vans, and Light Trucks February 2001 页
SAE J2071-1994 Aerodynamic Testing of Road Vehicles - Open Throat Wind Tunnel Adjustment, Information Report June 1994 页
SAE J207-1970(R1985) Electroplating of Nickel and Chromium on Metal Parts - Automotive Ornamentation and Hardware, Standard; 页
SAE J2073-1993(R1998) Autmotive Starter Remanufacturing Procedures 页
SAE J2074-2000 The Air Bag Systems in Your Car"What the Public Needs to Know" 页
SAE J2075-2001 Alternator Remanufacturing/Rebuilding Procedures Includes Passenger Car, Heavy Duty, Industrial, Agricultural, and Marine 页
SAE J2076-2001 High-Temperature Power Steering Return Hose - Low Pressure 页
SAE J2077-1990 Miniature Blade Type Electrical Fuses, Standard November 1990 页
SAE J2079-1992 Location of Atomizer of Ether Systems for Diesel Engines, Information Report May 1992 页
SAE J2081-1997 (R) Test Procedure for Determining the Resistance of Safety-Glazing Materials, of Which One Surface is Plastic, to Simulated Weathering 页
SAE J2082-1992 Cooling Flow Measurement Techniques, Information Report June 1992 页
SAE J2084-1993 Aerodynamic Testing of Road Vehicles-Testing Methods and Procedures, Information Report January 1993 页
SAE J2087-2006 (R) Daytime Running Light 页
SAE J2092-1995(R1999) Testing of Wheelchair Lifts for Entry to or Exit from a Personally Licensed Vehicle 页
SAE J2093-1995(R1999) Design Considerations for Wheelchair Lifts for Entry to or Exit from a Personally Licensed Vehicle 页
SAE J2094-2001 (R) Vehicle and Control Modifications for Drivers with Physical Disabilities Terminology 页
SAE J2099-1999 Standard of Purity for Recycled HFC-134a (R-134a) for Use in Mobile Air-Conditioning Systems 页
SAE J2100-1992 Accelerated Environmental Testing for Bonded Automotive Assemblies, Recommended Practice August 1992 页
SAE J2108-1991(R1991) Door Courtesy Switch 页
SAE J211-1-2003 (R) Instrumentation for Impact Test - Part 1 - Electronic Instrumentation 页
SAE J2111-2005 Headlamp Cleaners 页
SAE J211-2-2001 (R) Instrumentation for Impact Test - Part 2: Photographic Instrumentation 页
SAE J2114-1999 Dolly Rollover Recommended Test Procedure 页
SAE J2115-1993(R2000) Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer 页
SAE J2115-2006 (R) Air Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer 页
SAE J2116-2003 Two-Stroke-Cycle Gasoline Engine Lubricants Performance and Service Classification 页
SAE J2118-2006 Braking Performance - Asphalt Pavers 页
SAE J2119-1993(R1997) Manual Controls for Mature Drivers 页
SAE J2120-1992(R1997) Personal Watercraft - Electrical Systems 页
SAE J2121-1995(R2002) Requirements for Composite Lighting Assemblies Used on Construction and Industrial Machinery 页
SAE J212-1998 (R) Brake System Dynamometer Test Procedure - Passenger Car 页
SAE J2122-1998 Numbering System for Single Diameter Drills 页
SAE J2123-1998 Numbering System for Taps 页
SAE J2124-1998 Numbering System for Single Diameter and Taper Reamers 页
SAE J2129-1990 Guidelines for Requests Received from Outside Sources for the Conag Council to Originate or Review Technical Reports, Information Report November 1990 页
SAE J2130-1997 (R) Self-Propelled Sweepers and Cleaning Equipment 页
SAE J213-2004 Motorcycle Classifications 页
SAE J2132-1995(R1999) Manual Transmissions and Transaxle High-Speed Lubrication, Unbalance, and Seizure Evaluation 页
SAE J2133-2001 (R) Disc Wheel Radial Runout Low Point Marking 页
SAE J2134-2005 (R) Luminous Reflectance in Safety Glazing Materials for Road Vehicles 页
SAE J2139-2005 Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width 页
SAE J2140-2000(R2005) General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines 页
SAE J216-1999 (R) Motor Vehicle Glazing - Electrical Circuits 页
SAE J2162-1998 Spark Plug Heat Rating Classifications FSC 5330 页
SAE J217-1994 (R) Stainless Steel 17-7 PH Spring Wire and Springs July 1994 页
SAE J2174-2002 (R) Heavy-Duty Wiring Systems for Trailers 2032 mm or More in Width 页
SAE J2175-1991 Specifications for Low Carbon Cast Steel Shot, Recommended Practice June 1991 页
SAE J2177-1992 Chassis Dynamometer Test Procedure - Heavy-Duty Road Vehicles 页
SAE J2178-1-1999(R2004) Class B Data Communication Network Messages Detailed Header Formats and Physical Address Assignments 页
SAE J2178-2-1999(R2004) Class B Data Communication Network Messages Part 2: Data Parameter Definitions 页
SAE J2178-3-1999(R2004) Class B Data Communication Network MessagesPart 3 Frame IDs for Single-Byte Forms of Headers 页
SAE J2178-4-1999(R2004) Class B Data Communication Network Messages Message Definitions for Three Byte Headers 页
SAE J2180-1993(R1998) Tilt Table Procedure for Measuring the Static Rollover Threshold for Heavy Trucks 页
SAE J2181-1993(R1998) Steady-State Circular Test Procedure for Trucks and Buses 页
SAE J218-1981 Passenger Car Identification Terminology December 1981 页
SAE J2183-2006 60 V and 600 V Single-Core Cables 页
SAE J2184-2000 (R) Vehicle Lift Points for Service Garage Lifting 页
SAE J2185-1997 Life Test for Heavy-Duty Storage Batteries 页
SAE J2186-1996(R2005) E/E Data Link Security 页
SAE J2188-2003 Commercial Truck and Bus SAE Recommended Procedure for Vehicle Performance Prediction and Charting 页
SAE J2189-2001 (R) Guidelines for Evaluating Child Restraint System Interactions with Deploying Airbags 页
SAE J2190-1993 Enhanced E/E Diagnostic Test Modes, Recommended Practice June 1993 页
SAE J2191-2004 Recommended Practice for Identification of Standardized Truck and Tractor Electrical Circuits 页
SAE J2192-2005 Recommended Testing Methods for Physical Protection of Wiring Harnesses 页
SAE J2194-1987(R2002) Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors 页
SAE J2196-1992(R1997) Service Hose for Automotive Air Conditioning 页
SAE J2197-1992(R1997) HFC-134a (R-134a) Service Hose Fittings for Automotive Air-Conditioning Service Equipment 页
SAE J2198-2000 (R) Glossary - Automatic Belt Tensioner 页
SAE J2200-1991(R2001) Passenger Car and Light Truck Axles 页
SAE J220-1991(R1998) Crane Boomstop 页
SAE J2202-2004 (R) Heavy-Duty Wiring Systems for On-Highway Trucks 页
SAE J2203-1995(R1999) SAE 17.6 Cubic Inch Spark Plug Rating Engine 页
SAE J2204-1994 Tire Size Differential - Articulated Wheel Loader, Standard May 1994 页
SAE J2208-1993 Park Standard for Automatic Transmissions, Recommended Practice June 1993 页
SAE J2209-1999 CFC-12 (R-12) Refrigerant Recovery Equipment for Mobile Automotive Air-Conditioning Systems 页
SAE J2210-1999 HFC-134a (R-134a) Recovery/Recycling Equipment for Mobile Air-Conditioning Systems 页
SAE J2211-1998 Recommended Service Procedure for the Containment of HFC-134a (R-134a) 页
SAE J2212-1993 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus, Recommended Practice March 1993 页
SAE J2213-1991 Metric Ball Joints, Standard June 1991 页
SAE J2215-1991 Surface Match Verification Method for Pressure Sensitive Adhesively Attached Components 页
SAE J2217-1991 Photometric Guidelines for Instrument Panel Displays That Accommodate Older Drivers, Information Report October 1991 页
SAE J2219-1994 (R) Mobile Air Conditioning Industry Criteria and Guidelines, Information Report October 1994 页
SAE J2221-1998 Standardized Symbols for Electrical Circuit Diagrams 页
SAE J222-2000 (R) Parking Lamps (Front Position Lamps) 页
SAE J2222-1993 Coiled Electrical Cable, Technical Report November 1993 页
SAE J2223-1-2005 Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 1: Single-Pole ConnectorsFlat Blade Terminals Dimensional Characteristics and Specific Requirements 页
SAE J2223-2-2005 (R) Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 2: Tests and General Performance Requirements 页
SAE J2223-3-2006 Connections for On-Board Road Vehicle Electrical Wiring HarnessesPart 3: Multipole Connectors Flat Blade TerminalsDimensional Characteristics and Specific Requirements 页
SAE J2224-2002 Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging 页
SAE J2226-1992(R1998) Internal Combustion Engines - Piston Rings - Steel Rectangular Rings 页
SAE J2227-2002 International Tests and Specifications for Automotive Engine Oils 页
SAE J2228-1993(R2001) Kingpin Wear Limits - Commercial Trailers and Semitrailers 页
SAE J2229-1993 Accelerated Exposure of Automotive Interior Trim Materials Using an Outdoor Under Glass Variable Angle Controlled Temperature Apparatus, Standard February 1993 页
SAE J2230-1993 Accelerated Exposure of Automotive Interior Trim Materials Using Outdoor Under-Glass Controlled Sun-Tracking Temperature and Humidity Apparatus, Standard; February 1993 页
SAE J2232-1992(R1999) Vehicle System Voltage - Initial Recommendations 页
SAE J2233-2002 Bus Body Heating System Test 页
SAE J2234-2001 Equivalent Temperature 页
SAE J2235-1999(R1999) Paint and Trim Code Location 页
SAE J2236-1999 Standard Method for Determining Continuous Upper Temperature Resistance of Elastomers 页
SAE J2237-1995 Heavy-Duty Starter Remanufacturing Procedures, Recommended Practice February 1995 页
SAE J2238-2001 Airbag Inflator Ballistic Tank Test Procedure Gas Generators Used in Inflatable Restraint Systems 页
SAE J2240-1993(R1999) Starter Armature Remanufacturing Procedures 页
SAE J2241-1993(R1998) Automotive Starter Drive Remanufacturing Procedures 页
SAE J224-1980 Collision Deformation Classification March 1980 页
SAE J2242-1993(R1998) Automotive Starter Solenoid Remanufacturing Procedures 页
SAE J2244-1-1991 Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 1: Port with O-Ring Seal in Truncated Housing ISO 6149-1 页
SAE J2244-2-1991 Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends - Dimensions, Design, Test Methods, and Requirements ISO 6149-2 页
SAE J2244-3-1998 Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing, Part 3: Light-Duty (L Series) Stud Ends - Dimensions, Design, Test Methods, and Requirements 页
SAE J2244-4-1997 Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing - Part 4: Heavy-Duty (S Series) External Hex Port Plugs - Dimensions, Design, Test Methods, and Requirements 页
SAE J2245-1994(R2002) Recommended Practice for Splash and Spray Evaluation 页
SAE J2246-1992 Antilock Brake System Review, Information Report June 1992 页
SAE J2247-2001 Truck Tractor Power Output for Trailer ABS 页
SAE J2249-1999 Wheelchair Tiedown and Occupant Restraint Systems for Use in Motor Vehicles 页
SAE J225-2003 Brake Force Distribution Field Test Procedure for Truck and Bus 页
SAE J2253-1995 Test Procedures for Automotive Structural Composite Materials, Standard December 1995 页
SAE J2254-1995 Fluid Power Piping Cleaning Process, Information Report September 1995 页
SAE J2255-1996 Antilock Brake Systems Energy Consumption Test Procedure for Air-Braked-Equipped Truck Tractors, Buses, Trailers, and Dollies, Recommended Practice May 1996 页
SAE J2258-2003 (R) Light Utility Vehicles 页
SAE J2260-2004 Nonmetallic Fuel System Tubing with One or More Layers 页
SAE J2261-2002 Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width 页
SAE J226-1995 (R) Engine Preheaters 页
SAE J2263-1996 Road Load Measurement Using Onboard Anemometry and Coastdown Techniques 页
SAE J2264-1995 Chassis Dynamometer Simulation of Road Load Using Coastdown Techniques, Recommended Practice April 1995 页
SAE J2265-1995 Diesel Engines - Diesel Fuel - Performance Requirement and Test Method for Assessing Fuel Lubricity, Standard; June 1995 页
SAE J2266-2004 Location Referencing Message Specification (LRMS) 页
SAE J2270-1998(R2003) Ship Systems and EquipmentThreaded FastenersInspection, Test, and Installation Requirements 页
SAE J2271-1996(R2004) Ship Systems and Equiment Part Standard for Studs Continous and Double End (Inch Series) 页
SAE J2271M-1996(R2004) Ship Systems and Equipment - Part Standard for Studs - Continuous and Double End (Metric) 页
SAE J2275-1996 Internal Combustion Engines - Piston Ring-Grooves, Standard July 1996 页
SAE J2276-1998 Numbering System for Multiple Diameter Cutting Tools 页
SAE J2277-2003 Shot Peening Coverage 页
SAE J2280-1996 Ship Systems and Equipment - Fasteners - Selection and Identification Requirements, Standard April 1996 页
SAE J2281-1997 Selecting and Specifying Hot-Rolled Steel Bar Products 页
SAE J228-1990(R1995) Airflow Reference Standards 页
SAE J2282-2002 (R) Distributed Lighting Systems (DLS) 页
SAE J2283-2005 Mechanical and Material Requirements for One Piece Wheel Nuts 页
SAE J2284-1-2002 High Speed CAN (HSC) for Vehicle Applications at 125 Kbps 页
SAE J2284-2-2002 High Speed CAN (HSC) for Vehicle Applications at 250 Kbps 页
SAE J2284-3-2002 High-Speed CAN (HSC) for Vehicle Applications at 500 KBPS 页
SAE J2286-1997 Vendor Component Program Data File Interface for OEM Assembly Operations 页
SAE J2287-1999 Recommended Design and Performance Standard for Seats with Integrated Lap and Shoulder Restraints 页
SAE J2288-1997 Life Cycle Testing of Electric Vehicle Battery Modules 页
SAE J2289-2000 Electric Driver Battery Pack System Functional Guidelines 页
SAE J229-1971(R1993) Service Brake Structural Integrity Test Procedure - Passenger Car 页
SAE J2292-2000 Combination Pelvic/Upper Torso (Type 2) Operator Restraint Systems for Off-Road Work Machines 页
SAE J2293-1-1997 Energy Transfer System for Electric Vehicles - Part 1: Functional Requirements and System Architectures 页
SAE J2293-2-1997 Energy Transfer System for Electric Vehicles - Part 2: Communication Requirements and Network Architecture 页
SAE J2295-2006 Fastener Part Standard - Caps Screws, Hex Bolts, and Hex Nuts (inch Dimensioned) 页
SAE J2295M-2006 FastenersPart StandardCap Screws, Hex Bolts, and Hex Nuts (Metric) 页
SAE J2296-1998 Retest of Refrigerant Container 页
SAE J2297-1996 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a Air- Conditioning Systems, Standard September 1996 页
SAE J2298-1996 Ultraviolet Leak Detection: Procedure for Use of Refrigerant Leak Detection Dyes for Service of Mobile Air-Conditioning Systems, Standard September 1996 页
SAE J2299-1996 Ultraviolet Leak Detection: Performance Requirements for Fluorescent Refrigerant Leak Detection Dye Injection Equipment for Aftermarket Service of Mobile Air- Conditioning Systems, Standard September 1996 页
SAE J2301-2005 Universal Joint End Yoke Connection (Earwork) 页
SAE J230-1994 (R) Stainless Steel, SAE 30302, Spring Wire and Springs June 1994 页
SAE J2302-1996 Thermal Effectiveness of Sleeve Insulation 页
SAE J2305-2002 Safety for Horizontal Earthboring Machines 页
SAE J2305-2006 Hazard Reduction for Horizontal Earthboring Machines 页
SAE J2310-1999 Rectangular Cross Section Polymeric Sealing Rings (Metric) 页
SAE J2311-1999 Automatic Transmission Hydraulic Pump Test Procedure 页
SAE J2312-2005 Automatic Transmission Intake Filter Test Procedure 页
SAE J2313-1999 On-Board Land Vehicle Mayday Reporting Interface 页
SAE J2314-2000 Ethics for Accident Investigation and Reconstruction 页
SAE J2315-1998 Wheel Nut Seat Strength 页
SAE J2316-1998 Wheel Nut Seat System Test Procedures and Performance Requirements for Passenger Cars and Light Trucks 页
SAE J2317-1996(R2002) Tamper Resistance for Adjustable Parameters on Diesel Fuel Injection Pumps 页
SAE J2318-2002 Air Brake Actuator Test Performance Requirements 页
SAE J2319-1997 Low-Speed Impact Bumper System Test Procedure for Passenger Vehicles 页
SAE J2320-2001 Discharge Signal Lightning System 页
SAE J2321-1-2000(R2006) Disposable Hydraulic Filter Element - 115L/Min Flow, 1.0 MPa Collapse Pressure, Filtration Ratio = 75 at 6 and 10 um 页
SAE J2321-2002 Ship Systems and EquipmentGeneral Specification for Filter ElementsHydraulic and Lube Oil Service 页
SAE J2321-2-2000(R2006) Disposable Hydraulic Filter Element - 190 L/Min Flow, 21 Mpa Collapse Pressure, Filtration Ratio = 75 at 7 um 页
SAE J2321-3-2000(R2006) Disposable Hydraulic Filter Elements - 21 MPa Collapse Pressure, Filtration Ratio = 75 at 10 um, 75 to 175 L/Min 页
SAE J232-2003 Industrial Rotary Mowers 页
SAE J2329-1997 Categorization and Properties of Low-Carbon Automotive Sheet Steels 页
SAE J2330-1998(R2003) Walk-Along Work MachinesBraking SystemsPerformance Requirements and Test Procedures 页
SAE J2331-1996(R2002) Operator? Field of View-Engineering Evaluation 页
SAE J2332-1997 Marking of Rubber Parts 页
SAE J2333-1998(R2004) Ship Systems and Equipment - Hydraulic Systems - Filter Selection Parameters 页
SAE J2334-2003 Laboratory Cyclic Corrosion Test 页
SAE J2337-1-2002 Connections for Fluid Power and High Pressure UsePorts, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 1: Ports With Recessed Conical Seat Requirements, Dimensions, Design, and Test Methods 页
SAE J2337-2-2002 Connections for Fluid Power and High Pressure Use Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 2: Stud End Requirements, Dimensions, Design, and Test Methods 页
SAE J2337-3-2002 Connections for Fluid Power and High Pressure UsePorts, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 3: Port Plug Requirements, Dimensions, Design, and Test Methods 页
SAE J2338-1996 Recommendations of the SAE Task Force on Headlamp Mounting Height, Technical Report 10-1996 页
SAE J2340-1999 Categorization and Properties of Dent Resistant, High Strength, and Ultra High Strength Automotive Sheet Steel 页
SAE J234-1977 Electric Windshield Washer Switch October 1977 页

      SAE J2343-1997 Recommended Practices for LNG Powered Heavy-Duty Trucks 页
SAE J2344-1998 Guidelines for Electric Vehicle Safety 页
SAE J2348-1997(R2002) Electric Windshield Washer SwitchTrucks, Buses, and Multipurpose Vehicles 页
SAE J2349-1997(R2002) Electric Windshield Wiper SwitchTrucks, Buses, and Multipurpose Vehicles 页
SAE J2350-1997(R2002) Electric Blower Motor SwitchTrucks, Buses, and Multipurpose Vehicles 页
SAE J235-1971 Electric Blower Motor Switch May 1971 页
SAE J2352-1998 Mayday Industry Survey Information Report 页
SAE J2353-1999 Data Dictionary for Advanced Traveler Information Systems (ATIS) 页
SAE J2354-2004 Message Sets for Advanced Traveler Information System (ATIS) 页
SAE J2355-1997 ITS Data Bus Architecture Reference Model Information Report 页
SAE J2356-1997 Graphical Model for Interactive Distributed Control 页
SAE J2357-2000 Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment 页
SAE J2358-2002 Low Speed Vehicles 页
SAE J2359-1998 Lubricating Oil, Internal Combustion Engine, Military Combat/Tactical Service 页
SAE J2360-1998 Lubricating Oil, Gear Multipurpose (Metric) Military Use 页
SAE J2361-1998 Lubricating Oil, Internal Combustion Engine, Preservation Break-In 页
SAE J2362-2005 (R) Lubricating Oil, Automotive Engine, API Service SM for Military Administrative Service 页
SAE J2363-2005 (R) Lubricating Oil for Wheeled Military Vehicles with Heavy-Duty Diesel Engines 页
SAE J2364-2004 Navigation and Route Guidance Function Accessibility While Driving 页
SAE J2365-2002 Calculation of the Time to Complete In-Vehicle Navigation and Route Guidance Tasks 页
SAE J2366-1-2001 ITS Data Bus - IDB-C Physical Layer 页
SAE J2366-1L-2001 ITS Data Bus - Low Impedance Stereo Audio (LISA) 页
SAE J2366-2-2001 Link Layer 页
SAE J2366-4-2002 ITS Data BusThin Transport Layer 页
SAE J2366-7-2002 ITS Data BusApplication Message Layer 页
SAE J2369-2000 Standards for ATIS Message Sets Delivered Over Reduced Bandwidth Media 页
SAE J2370-2003 Geometric Dimensions and Tolerancing for Curved Hose 页
SAE J2371-1997 Clamping Force Test Procedure 页
SAE J2372-1999 Field Test Analysis Information Report 页
SAE J2373-2000 Stakeholder? Workshop Information Report 页
SAE J2374-1999 Location Referencing Message Specification referencing Meassage Specification 页
SAE J2375-1997 Selection of Adhesives for the Attachment of Exterior Aftermarket Accessories 页
SAE J2376-2005 New-Vehicle Collision Repair Information 页
SAE J2378-2003 Test Procedure for Trailer Air Reservoir Fill and Parking Brake Release Times 页
SAE J2379-1997 Performance Engine Building Recommended Practices 页
SAE J2380-1998 Vibration Testing of Electric Vehicle Batteries 页
SAE J238-1973(R1998) Nut and Conical Spring Washer Assemblies 页
SAE J2382-2000 Video Based Light Measurement Techniques 页
SAE J2383-1998(R2004) Air Dryer Installation Procedure 页
SAE J2384-1999(R2006) Air Dryer Test Procedure 页
SAE J2387-2003 Dimensions and Tolerances for Coolant System Hoses 页
SAE J2388-2002 Secondary Control Modifications 页
SAE J2392-2003 Categorization and Properties of SAE Cold Rolled Strip Steels 页
SAE J2394-1998 Seven-Conductor Cable for ABS Power 页
SAE J2395-2002 ITS In-Vehicle Message Priority 页
SAE J2396-2000 Definitions and Experimental Measures Related to the Specification of Driver Visual Behavior using Video Based Techniques 页
SAE J2399-2003 Adaptive Cruise Control (ACC) Operating Characteristics and User Interface 页
SAE J2400-2003 Human Factors in Forward Collision Warning Systems: Operating Characteristics and User Interface Requirements 页
SAE J240-2002 Life Test for Automotive Storage Batteries 页
SAE J2402-1997 Road Vehicles - Symbols for Controls, Indicators, and Tell-Tales ISO 2575 页
SAE J2403-2004 Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature 页
SAE J2405-1997 Low-Permeation Fuel Fill and Vent Tube 页
SAE J2406-2002 Recommended Practices for CNG Powered Medium and Heavy-Duty Trucks 页
SAE J2407-1997 Clutch Installation and Release Linkage Requirements for Truck and Bus Application 页
SAE J2408-1997(R2002) Clutch Requirements for High-Torque Truck and Bus Engines 页
SAE J2409-2004 (R) Strain-Life Fatigue Data File Format 页
SAE J2411-2000 Single Wire CAN Network for Vehicle Applications 页
SAE J2412-2004 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus 页
SAE J2413-2003 Protocol To Verify Performance of New Xenon Arc Test Apparatus 页
SAE J2414-2005 Application Testing of Oil-to-Water Oil Coolers for Heat Transfer Performance 页
SAE J2417-2004 Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment 页
SAE J2418-1998(R2003) Occupant Restraint System EvaluationFrontal Impact Component-Level Heavy Trucks 页
SAE J2419-1998(R2003) Occupant Restraint System EvaluationFrontal Impact System-Level Heavy Trucks 页
SAE J2420-2003 COE Frontal Strength Evaluation - Dynamic Loading Heavy Trucks 页
SAE J2422-2003 Cab Roof Strength Evaluation - Quasi-Static Loading Heavy Trucks 页
SAE J2424-1998(R2003) Free Motion Headform Impact Tests of Heavy Truck Cab Interiors 页
SAE J2425-2004 Steering Control Systems - Laboratory Test Procedure Heavy Trucks 页
SAE J2426-1998(R2003) Occupant Restraint System EvaluationLateral Rollover System-Level Heavy Trucks 页
SAE J2429-2004 Free-Rolling Cornering Test for Truck and Bus Tires 页
SAE J2430-1999 Dynamometer Effectiveness Charactrization Test for Passenger Car and Light Truck Brake Friction Products 页
SAE J2431-1997 Effects of Front-Mounted Accessories on Air Bag Sensors and Crashworthiness 页
SAE J243-1971 Methods of Tests for Automotive-Type Sealers, Adhesives, and Deadeners October 1971 页
SAE J2432-2000 Performance Testing of PK Section V-Ribbed Belts 页
SAE J2435-1999 Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, and Beading 页
SAE J2436-1998 Accessory Drive Tensioner Test Standards (Mechanical Rotary Type) 页
SAE J2437-1998 Air Starter Motor Test Procedures 页
SAE J2438-1998 Low-Temperature Cranking Load Requirements of an Engine - Air Starter Method 页
SAE J2440-1998 Domestic Performance Torque Converter Manufacturing 页
SAE J2441-2000 Shot Peening 页
SAE J244-1992 (R) Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines August 1992 页
SAE J2442-2000 Harmonized Provisions for Installation of Lamps and Retro-Reflecting Devices on Road Vehicles Except Motorcycles 页
SAE J2450-2005 Translation Quality Metric 页
SAE J2452-1999 Stepwise Coastdown Methodology for Measuring Tire Rolling Resistance 页
SAE J2453-1999 Manual Transmission and Transaxle Efficiency and Parasitic Loss Measurement 页
SAE J2455-1998 Drivetrain Systems Vibration Analysis Data Requirements 页
SAE J2456-1998 Mercury Switch Removal Process 页
SAE J2457-2001 Air Quality for Air Braked Vehicles 页
SAE J2458-1998 Exhaust Brake Dynamometer Test and Capability Rating Procedure 页
SAE J2461-2002 Vehicle Electronic Programming Stations (VEPS) System Specification for Win32 页
SAE J246-2000 Spherical and Flanged Sleeve (Compression) Tube Fittings 页
SAE J2464-1999 Electric Vehicle Battery Abuse Testing 页
SAE J2467-1999 Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring 页
SAE J2468-1999 Road Vehicles - Brake Linings - Compressibility Test Procedure 页
SAE J2469-1999(R2004) Clutch Application Powertrain Startability Rating Requirements for Truck and Bus Applicatons 页
SAE J2470-1999 Hydraulic Fluid Power - Valves - Method for Assessing the Lock Sensitivity to Contaminants 页
SAE J24714-2001 Fluid Systems - Connector Tubes - General Specification and Part Standard 页
SAE J247-1974(R1987) Instrumentation for Measuring Acoustic Impulses within Vehicles 页
SAE J2473-2001 Self-Propelled Sweepers and Scrubbers - Maximum Gradient Rating During Hopper Discharge 页
SAE J2474-2000 Self Propelled Sweepers and Scrubbers Battery Run-Time 页
SAE J2475-2005 Wheel End Assembly and Axle Spindle Interface Dimensions - Truck and Bus 页
SAE J2477-2004 Automotive Austempered Ductile (Nodular) Iron Castings (ADI) 页
SAE J2481-1999 Dynamic Simulation Sled Testing 页
SAE J2484-2002 Fastener Part StandardMachine Screws 页
SAE J2485-2003 Fastener Part Standard - Machine Screw Nuts (Metric and Inch) 页
SAE J2486-1999 Tension Indicating Washer Tightening Method for Fasteners 页
SAE J2487-2000 SAE No.2 Friction Test Machine 3600 r/min Stepped Power Test 页
SAE J2488-2006 SAE No.2 Friction Test Machine 6000 r/min Stepped Power Test 页
SAE J2489-2000 SAE No.2 Friction Test Machine Durability Test 页
SAE J2490-2000 SAE No.2 Friction Test Machine uPvt Test 页
SAE J249-1988 Mechanical Stop Lamp Switch June 1988 页
SAE J2492-1999 Considerations for Suspension Modification 页
SAE J2494-1-2004 Dimensional Specifications for Metallic Body Push-to-Connect Fittings Used on a Vehicular Air Brake System Superseding J2494 页
SAE J2494-2-2002 Dimensional Specifications for Non-Metallic Body Push-to-Connect Fittings Used On a Vehicular Air Brake System 页
SAE J2494-3-2002 Performance Requirements for SAE J844 Non-metallic Air Brake Tubing and Push to Connect Fitting Assemblies Used in Vehicular Air Brake Systems 页
SAE J2494-4-2002 Cartridge Cavity 页
SAE J2495-1999 Thermal Containment Efficiency of Sleeve Materials 页
SAE J2496-2000 Transport Area Network Cabling 页
SAE J2497-2002 Power Line Carrier Communications for Commercial Vehicles 页
SAE J2498-1999(R2004) Minimum Performance of the Warning Light System Used on Emergency Vehicles 页
SAE J2501-2001 Round, Unscreened, 60 V and 600 V Multicore Sheathed Cables 页
SAE J250-1959 Synthetic Resin Plastic Sealers, Nondrying Type May 1959 页
SAE J2503-2000 Drawbar Pull Performance Criteria 页
SAE J2505-2003 Measurement of Vehicle-Roadway Frictional Drag 页
SAE J2506-2000 Material Handler Nomenclature 页
SAE J2512-1999 Towing Equipment Ratings and Practices 页
SAE J2513-2000 Earthmoving Machinery - Coupling of Attachments to Skid Steer Loaders 页
SAE J2515-1999 High Temperature Materials for Exhaust Manifolds 页
SAE J2517-2000 Hybrid III Family Chest Potentiometer Calibration Procedure 页
SAE J2518-2003 Lift Capacity Calculation Method Scrap and Material Handlers 页
SAE J2519-2002 Guidelines and Procedures for Directional Drilling Tracking Operators 页
SAE J2520-2002 Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment 页
SAE J2521-2006 (R) Disc and Drum Brake Dynamometer Squeal Noise Matrix 页
SAE J2522-2003 Dynamometer Global Brake Effectiveness 页
SAE J2523-2003 Rolling Circumference Index Groups for Radial Tractor Drive Tires 页
SAE J2525-2000 SAE Design Guideline: Metal Belt Drive Continuously Variable Ratio (CVT) Automatic Transmissions 页
SAE J2527-2004 Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus 页
SAE J2530-2004 Aftermarket Wheels-Passenger Cars and Light Truck - Performance Requirements and Test Procedures 页
SAE J2531-2003 Impulse Noise from Automotive Inflatable Devices 页
SAE J253-1984(R1989) Headlamp Switch 页
SAE J2534-1-2004 (R) Recommended Practice for Pass-Thru Vehicle Programming 页
SAE J2534-2-2006 Optional Pass-Thru Features 页
SAE J2535-2001 Setting Preload in Heavy-Duty Wheel Bearings 页
SAE J2536-2004 Anti-Lock Brake System (ABS) Road Test Evaluation Procedure for Truck-Tractors and Buses 页
SAE J2539-2002 Comparison of GATS Messages to SAE ATIS Standards 页
SAE J2540-1-2002 RDS Phrase Lists 页
SAE J2540-2002 Messages for Handling Strings and Look-Up Tables in ATIS Standards 页
SAE J2540-2-2004 (R) ITIS Phrase Lists (International Traveler Information Systems) 页
SAE J2540-3-2002 National Names Phrase List 页
SAE J254-1993 (R) Instrumentation and Techniques for Exhaust Gas Emissions Measurement September 1993 页
SAE J2542-2001 Self-Propelled Sweepers and Scrubbers Fuel Consumption of Non-Propulsion Auxiliary Engines 页
SAE J2544-2000 Plug-In Relay Test Methods 页
SAE J2545-2001 Test Procedures for Non-SAE Hydraulic Hoses 页
SAE J2546-2002 Model Specification Process Standard 页
SAE J2548-2001 Test Method to Obtain Lug-Up Torque Data for Heavy-Duty Truck and Bus Engines 页
SAE J2551-2001 Recommended Practices for Fluid Conductor Metallic Tubing Applications 页
SAE J2554-2003 Engine Intake Air Water Separation Test Procedure 页
SAE J2555-2000 Vehicle Idle Gear Rattle Evaluation Procedure 页
SAE J2556-2000(R2005) Radiated Emissions (RE) Narrowband Data Analysis - Power Spectral Density (PSD) 页
SAE J2558-2005 Classification System for Thermoplastic Elastomers 页
SAE J2561-2001 Bluetooth Wireless Protocol for Automotive Applications 页
SAE J2562-2005 Biaxial Wheel Fatigue Test 页
SAE J2564-2004 Automotive Stability Enhancement Systems 页
SAE J2566-2005 Personal WatercraftDisplay of Persons Capacity Information 页
SAE J2567-2004 Measurement of Exhaust Sound Levels of Stationary Snowmobiles 页
SAE J2568-2003 Intrusion Resistance of Safety Glazing Systems for Road Vehicles 页
SAE J2570-2001 Performance Specifications for Anthropomorphic Test Device Transducers 页
SAE J2571-2003 Advanced Driver Interface Systems for Commercial Vehicle Operations 页
SAE J257-1997 (R) Brake Rating Horsepower Requirements-Commercial Vehicles 页
SAE J2572-2006 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fuelled by Compressed Gaseous Hydrogen 页
SAE J2574-2002 Fuel Cell Vehicle Terminology 页
SAE J2575-2004 Standardized Dent Resistance Test Procedure 页
SAE J2576-2002 Blade Fuses - 42 V System 页
SAE J2577-2005 Heavy Duty Lamp Electrical Connector Standard 页
SAE J2578-2002 Recommended Practice for General Fuel Cell Vehicle Safety 页
SAE J2580-2005 Identification and Installation of Air Brake System Components 页
SAE J2581-2003 Thermal Transport Properties Germane to Friction Materials and Brakes 页
SAE J2582-2004 Automotive Ductile Iron Castings for High Temperature Applications 页
SAE J2583-2002 Directional Drilling Planning and Mapping Nomenclature 页
SAE J2584-2002 Headlamp Mounting Height for Passenger and Pickup Truck Vehicles 页
SAE J2587-2005 Optimized Fuel Tank Sender Closure 页
SAE J2588-2004 Remote Steering Control Systems 页
SAE J2590-2001 PMODE for In-Vehicle Networks 页
SAE J2591-2002 Adaptive Forward Lighting System 页
SAE J259-1971 Ignition Switch June 1971 页
SAE J2592-2006 Carbon Steel Tubing for General Use Understanding Nondestructive Testing for Carbon Steel Tubing 页
SAE J2593-2006 Information Report for the Installation of Fluid Conductors and Connectors 页
SAE J2594-2003 Recommended Practice To Design For Recycling Proton Exchange Membrane (PEM) Fuel Cell Systems 页
SAE J2595-2006 Performance Requirements for Sealed Beam Motor Vehicle Headlamps Supersedes SAE J1383:12/1996 [Superseded: SAE J1383, SAE J1383, SAE J1383] 页
SAE J2596-2004 Fastener Part StandardTapping Screws and Metallic Drive Screws (Inch Dimensioned) 页
SAE J2598-2006 Automotive Disc Brake Pad Natural Frequency and Damping Test 页
SAE J2599-2003 Fuel Filler Pipe Assembly Design Practice to Meet Low Evaporative Emission Requirements 页
SAE J2600-2002 Compressed Hydrogen Surface Vehicle Refuelling Connection Devices 页
SAE J2602-1-2005 LIN Network for Vehicle Applications 页
SAE J2602-2-2005 LIN Network for Vehicle Applications Conformance Test 页
SAE J2603-2004 Powered Gas/Brake Control Systems 页
SAE J2605-2001(R2006) Non-Contact Hose Measurement Study 1 页
SAE J2606-2003 Drain and Fill Plug for use on Engines, Transmissions, and Axles 页
SAE J2608-2003 Off Throttle Steering Capabilities of Personal Watercraft 页
SAE J2609-2003 Multi-Dimensional Thermal Properties of Insulated Heat Shield Material Systems 页
SAE J2610-2002 Serial Data Communication Interface 页
SAE J2612-2002 Internal Combustion EnginesPiston Vocabulary 页
SAE J2613-2002 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending 页
SAE J2614-2003 Welded and Cold-Drawn, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring 页
SAE J2615-2005 Testing Performance of Fuel Cell Systems for Automotive Applications 页
SAE J2616-2005 Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System 页
SAE J2621-2004 Qualifying Aftermarket Two-Component Structural Foams 页
SAE J2622-2003 Battery Connections for 42 Volt Electrical Systems Tests and General Performance Requirements 页
SAE J2623-2002 Standard Rainflow File Format 页
SAE J2624-2003 Draft Comprehensive Lining Evaluation - Vehicle 页
SAE J2627-2002 Commercial Vehicle Braking System Definitions 页
SAE J2628-2005 (R) Characterization, Conducted Immunity 页
SAE J2630-2003 Converting ATIS Message Standards From ASN.1 to XML 页
SAE J2631-2006 Defining Hydraulic Oil Compatibility with Hydraulic Hose Elastomers 页
SAE J2634-2003 Scribing of Coatings in Preparation for Testing of Wheels and Wheel Trim 页
SAE J2636-2006 Corrosion Test Master Establishment 页
SAE J2638-2003 Fifth Wheel and Gooseneck Attachment Performance Up to 13 608/kg (30 000/lb) Trailer GVW 页
SAE J2640-2006 General Automotive Embedded Software Design Requirements 页
SAE J264-1998(R2004) Vision Glossary 页
SAE J2642-2004 Recommended Practice for Developing Specifications for Automotive Thermoplastic Materials 页
SAE J2643-2004 Standard Reference Elastomers (SRE) for Characterizing the Effect of Liquids on Vulcanized RubberS 页
SAE J2645-2003 Liquefied Natural Gas (LNG) Vehicle Metering and Dispensing Systems 页
SAE J2649-2004 Strain-Life Overload Fatigue Data File Format 页
SAE J2650-2005 Performance Requirements for Light Emitting Diode (LED) Road Illumination Device Systems 页
SAE J2651-2005 Jump Start Connections for 42 Volt Electrical Systems 页
SAE J265-1991(R2002) Diesel Fuel Injector Assembly - Types 8, 9, 10, and 11 页
SAE J2654-2004 Hardness of Brake Lining 页
SAE J2655-2003 Fastener Part StandardWashers and Lockwashers (Inch Dimensioned) 页
SAE J2656-2003 Fastener Part Standard Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned 页
SAE J2657-2004 Tire Pressure Monitoring Systems for Light Duty Highway Vehicles 页
SAE J2658-2003 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies 页
SAE J2659-2003 Test Method to Measure Fluid Permeation of Polymeric Materials by Speciation 页
SAE J266-1996 Steady-State Directional Control Test Procedures for Passenger Cars and Light Trucks 页
SAE J2662-2003 Torque Ratings for Power Take-off Mounting Pads 页
SAE J2664-2006 Trailer Sway Response Test Procedure 页
SAE J2666-2003 Hose Gauge Evaluation Procedure 页
SAE J2667-2004 STRSW (Squeeze Type Resistance Spot Welding) Equipment Acceptance Criteria for the Collision Repair Industry 页
SAE J2669-2006 Voltage Regulators for Automotive-Type Generators 页
SAE J2670-2005 Stability and Compatibility Criteria for Additives and Flushing Materials Intended for Use in Vehicle Air-Conditioning Systems Using R-134a 页
SAE J2671-2004 Reduced Effort Brakes and Reduced Effort Vacuum Powered Brake Backup Systems 页
SAE J267-1999 (R) Wheels/Rims - Trucks - Performance Requirements and Test Procedures 页
SAE J2672-2004 Reduced Effort Power Steering and Power Steering Backup Systems 页
SAE J2673-2004 Straight-Line Braking Test for Truck and Bus Tires 页
SAE J2675-2004 Combined Cornering and Braking Test for Truck Tires 页
SAE J2678-2004 Navigation and Route Guidance Function Accessibility While Driving Rationale 页
SAE J2679-2004 Charge Air Cooler Leakage 页
SAE J268-2004 Rear View Mirrors - Motorcycles 页
SAE J2683-2005 Refrigerant Purity and Container Requirements for Carbon Dioxide (CO2 R-744) Used in Mobile Air-Conditioning Systems 页
SAE J2685-2006 Positive Temperature Coefficient Overcurrent Protection Devices (PTCs) 页
SAE J2695-2005 Heavy Duty Vehicle Lubricating Greases 页
SAE J2704-2005 Tire Normal Force/Deflection and Gross Footprint Dimension Test 页
SAE J2705-2005 Tire Quasi-Static Envelopment of Triangular/Step Cleats Test 页
SAE J2707-2005 Wear Test Procedure on Inertia Dynamometer for Brake Friction Materials 页
SAE J2710-2005 Modal Testing and Identification of Lower Order Tire Natural Frequencies of Radial Tires 页
SAE J2711-2002 Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles 页
SAE J2717-2006 Tests to Define Tire Size (Geometry), Mass, and Inertias 页
SAE J2718-2006 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Force vs. Lateral Displacement 页
SAE J2719-2005 Information Report on the Development of a Hydrogen Quality Guideline for Fuel Cell Vehicles 页
SAE J272-1981 Vehicle Identification Number Systems December 1981 页
SAE J2723-2005 Engine Power Test CodeEngine Power and Torque Certification 页
SAE J2724-2006 Measurement of Disc Brake Friction Material Underlayer Distribution 页
SAE J2727-2005 Mobile Air Conditioning System Leakage Chart 页
SAE J2730-2006 Dynamic Cleat Test with Perpendicular and Inclined Cleats 页
SAE J2738-2005 Improved Roadway Illumination: Information Resource 页
SAE J2740-2005 General Motors UART Serial Data Communications 页
SAE J2760-2006 Pressure Terminology Used In Fuel Cells and Other Hydrogen Vehicle Applications 页
SAE J276-1992(R2002) Steering Frame Lock for Articulated Loaders and Tractors 页
SAE J277-1990(R1995) Maintenance of Design Voltage - Snowmobile Electrical Systems 页
SAE J278-2006 Snowmobile Stop Lamp 页
SAE J279-2006 Snowmobile Tail Lamp (Rear Position Lamp) 页
SAE J280-2006 Snowmobile Headlamps 页
SAE J283-1993(R1999) Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch 页
SAE J285-1992(R1999) Gasoline Dispenser Nozzle Spouts 页
SAE J286-2006 SAE No. 2 Clutch Friction Test Machine Guidelines 页
SAE J287-1980(R1988) Driver Hand Control Reach 页
SAE J288-2002 (R) Snowmobile Fuel Tanks 页
SAE J291-1980 Determination of Brake Fluid Temperature June 1980 页
SAE J292-1973(R1995) Snowmobile and Snowmobile Cutter Lamps, Reflective Devices, and Associated Equipment 页
SAE J292-2006 Snowmobile and Snowmobile Cutter Lamps, Reflective Devices, and Associated Equipment 页
SAE J293-2004 (R) Truck And Bus Grade Parking Performance Requirements 页
SAE J294-2004 Service Brake Structural Integrity Test ProcedureVehicles Over 4500 kg (10 000 lb) GVWR 页
SAE J299-1980(R1993) Stopping Distance Test Procedure 页
SAE J3000-2003 Thermoplastic Elastomer Classification System 页
SAE J300-2004 Engine Oil Viscosity Classification 页
SAE J301-2006 Effective Dates of New or Revised Technical Reports 页
SAE J30-1998 Fuel and Oil Hoses FSC 4720 页
SAE J304-1999 Engine Oil Tests 页
SAE J306-2005 Automotive Gear Lubricant Viscosity Classification 页
SAE J308-1996 (R) Axle and Manual Transmission Lubricants January 1996 页
SAE J310-2005 Automotive Lubricating Greases 页
SAE J311-2000 Fluid for Passenger Car Type Automatic Transmissions 页
SAE J31-1986 Hydraulic Backhoe Lift Capacity March 1986 页
SAE J312-2001 Automotive Gasolines February 2001 页
SAE J313-2004 Diesel Fuels 页
SAE J314-2002 Felts - Wool and Part Wool 页
SAE J315-2004 Fiberboard Test Procedure 页
SAE J318-1997(R2003) Automotive Air Brake Line Couplers (Gladhands) 页
SAE J321-1999 (R) Tire Guards for Operator Protection - Earthmoving Haulage Machines 页
SAE J322-2003 Nonmetallic Trim MaterialsTest Method for Determining the Staining Resistance to Hydrogen Sulfide Gas 页
SAE J323-2004 Test Method for Determining Cold Cracking of Flexible Plastic Materials 页
SAE J326-1986 Nomenclature-Hydraulic Backhoes March 1986 页
SAE J328-2005 WheelsPassenger Car and Light Truck Performance Requirements and Test Procedures 页
SAE J331-1987(R2000) Sound Levels for Motorcycles 页
SAE J33-1991(R2000) Snowmobile Definitions and Nomenclature - General 页
SAE J332-2002 Testing Machines for Measuring the Uniformity of Passenger Car and Light Truck Tires 页
SAE J335-1995 (R) Multiposition Small Engine Exhaust System Fire Ignition Suppression June 1995 页
SAE J336-1988(R2001) Sound Level for Truck Cab Interior 页
SAE J339-1994 (R) Seat Belt Hardware Webbing Abrasion Test Procedure June 1994 页
SAE J34-2005 Exterior Sound Level Measurement Procedure for Pleasure Motorboats 页
SAE J342-1991 Spark Arrester Test Procedure for Large Size Engines January 1991 页
SAE J343-2004 Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies 页
SAE J345A-1969 Wet or Dry Pavement Passenger Car Tire Peak and Locked Wheel Braking Traction March 1969 页
SAE J347-1995(R2002) Diesel Fuel Injector Assembly Type 7 (9.5 mm) 页
SAE J348-1990 (R) Wheel Chocks June 1990 页
SAE J349-1991 Detection of Surface Imperfections in Ferrous Rods, Bars, Tubes, and Wires February 1991 页
SAE J350-1991 Spark Arrester Test Procedure for Medium Size Engines January 1991 页
SAE J356-2006 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading 页
SAE J357-1999 Physical and Chemical Properties of Engine Oils 页
SAE J358-1991 Nondestructive Tests February 1991 页
SAE J359-1991 Infrared Testing February 1991 页
SAE J360-2001 (R) Truck and Bus Grade Parking Performance Test Procedure 页
SAE J361-2003 (R) Procedure for Visual Evaluation of Interior and Exterior Automotive Trim 页
SAE J363-1987(R1994) Filter-Base Mounting 页
SAE J365-2004 Method of Testing Resistance to Scuffing of Trim Materials 页
SAE J366-1987(R2001) Exterior Sound Level for Heavy Trucks and Buses 页
SAE J369-2003 (R) Flammability of Polymeric Interior Materials Horizontal Test Method 页
SAE J371-1985(R2006) Drain, Fill and Level Plugs for Off-Road, Self-Propelled Work Machines 页
SAE J373-1978(R1993) Housing Internal Dimensions for Single- and Two-Plate Spring-Loaded Clutches 页
SAE J374-2002 Vehicle Roof Strength Test Procedure 页
SAE J375-1985(R1994) Radius-Of-Load or Boom Angle Indicating Systems 页
SAE J376-1985 Load Indicating Devices in Lifting Crane Service April 1985 页
SAE J377-2001 (R) Vehicular Traffic Sound Signaling Devices 页
SAE J378-2004 (R) Marine Propulsion System Wiring 页
SAE J379-2004 (R) Gogan Hardness of Brake Lining 页
SAE J380-2002 (R) Specific Gravity of Friction Material 页
SAE J381-2000 (R) Windshield Defrosting Systems Test Procedure and Performance Requirements - Trucks, Buses, and Multipurpose Vehicles 页
SAE J38-1991 (R) Lift Arm Support Devices for Loaders 页
SAE J383-1995 (R) Motor Vehicle Seat Belt Anchorages - Design Recommendations June 1995 页
SAE J384-1994 (R) Motor Vehicle Seat Belt Anchorages - Test Procedure June 1994 页
SAE J385-1995 Motor Vehicle Seat Belt Anchorages - Performance Requirements March 1995 页
SAE J386-2006 (R) Operator Restraint System for Off-Road Work Machines 页
SAE J387-1995 (R) Terminology - Motor Vehicle Lighting September 1995 页
SAE J390-1999 (R) Dual Dimensioning Engineering Drawings 页
SAE J391-1969(R1981) Definition for Particle Size 页
SAE J392-2003 Motorcycle and Motor Driven Cycle Electrical System Maintenance of Design Voltage 页
SAE J393-2001 (R) Nomenclature - Wheels, Hubs, and Rims for Commercial Vehicles 页
SAE J397-1995(R2004) Deflection Limiting VolumeProtective Structures Laboratory Evaluation 页
SAE J398-2005 (R) Rated (Advertised) Fuel CapacityPassenger Car, Multi-Purpose Passenger Vehicles, and Light Duty Trucks 页
SAE J399-1976(R1985) Anodized Aluminum Automotive Parts 页
SAE J4000-1999 Identification and Measurement of Best Practice in Implementation of Lean Operation 页
SAE J4001-1999 Implementation of Lean Operation User Manual 页
SAE J400-2002 Test for Chip Resistance of Surface Coatings 页
SAE J4002-2005 (R) H-Point Machine (HPM-II) Specifications and Procedure for H-Point DeterminationAuditing Vehicle Seats 页
SAE J4003-2005 H-Point Machine (HPM-II)Procedure for H-Point DeterminationBenchmarking Vehicle Seats 页
SAE J4004-2005 Positioning the H-Point Design Tool Seating Reference Point and Seat Track Length 页
SAE J401-2000 Selection and Use of Steels 页
SAE J402-2005 (R) New Steel Designation System for Wrought or Rolled Steel 页
SAE J403-2001 Chemical Compositions of SAE Carbon Steels Supersedes Ford ESN-M1A46-A 页
SAE J404-2000 Chemical Compositions of SAE Alloy Steels 页
SAE J405-1998 (R) Chemical Compositions of SAE Wrought Stainless Steels 页
SAE J406-1998 Methods of Determining Hardenability of Steels 页
SAE J409-1990(R1995) Product Analysis - Permissible Variations from Specified Chemical Analysis of a Heat or Cast of Steel 页
SAE J411-1997 (R) Carbon and Alloy Steels 页
SAE J412-1995 General Characteristics and Heat Treatments of Steels October 1995 页
SAE J413-1932(R2002) Mechanical Properties of Heat Treated Wrought Steels 页
SAE J415-1995 (R) Definition of Heat Treating Terms July 1995 页
SAE J417-1983 Hardness Tests and Hardness Number Conversions December 1983 页
SAE J419-1983 Methods of Measuring Decarburization December 1983 页
SAE J420-1991 Magnetic Particle Inspection March 1991 页
SAE J422-1983 Microscopic Determination of Inclusions in Steels December 1983 页
SAE J423-1983(R1998) Methods of Measuring Case Depth 页
SAE J425-1991 Electromagnetic Testing by Eddy Current Methods March 1991 页
SAE J426-1991 Liquid Penetrant Test Methods March 1991 页
SAE J427-1991 Penetrating Radiation Inspection March 1991 页
SAE J428-1991 Ultrasonic Inspection March 1991 页
SAE J429-1999 Mechanical and Material Requirements for Externally Threaded Fasteners 页
SAE J430-1960(R1998) Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets Replaces Ford ESA-M1A14-A 页
SAE J431-2000 (R) Automotive Gray Iron Castings 页
SAE J434-2004 (R) Automotive Ductile (Nodular) Iron Castings 页
SAE J435-2002 (R) Automotive Steel Castings 页
SAE J437A-1970 Selection and Heat Treatment of Tool and Die Steels 页
SAE J438B-1970 Tool and Die Steels May 1970 页
SAE J439A-1977 Sintered Carbide Tools February 1977 页
SAE J441-1993 (R) Cut Wire Shot June 1993 页
SAE J44-2003 Service Brake System Performance RequirementsSnowmobiles 页
SAE J442-2006 Test Strip, Holder, and Gage for Shot Peening 页
SAE J443-2003 (R) Procedures for Using Standard Shot Peening Test Strip 页
SAE J444-1993(R2005) Cast Shot and Grit Size Specifications for Peening and Cleaning 页
SAE J445-1996(R2005) Metallic Shot and Grit Mechanical Testing 页
SAE J447-1995 (R) Prevention of Corrosion of Motor Vehicle Body and Chassis Components July 1995 页
SAE J448A-1963 Surface Texture June 1963 页
SAE J449A-1963 Surface Texture Control June 1963 页
SAE J450-1960(R2002) Use of Terms Yield Strength and Yield Point 页
SAE J451-1976(R1989) Aluminum Alloys - Fundamentals March 1976 页
SAE J45-2003 Brake System Test Procedure-Snowmobiles 页
SAE J452-2003 General Information - Chemical Compositions, Mechanical and Physical Properties of SAE Aluminum Casting Alloys 页
SAE J454-1991 General Data on Wrought Aluminum Alloys February 1991 页
SAE J457-1991 Chemical Compositions, Mechanical Property Limits, and Dimensional Tolerances of SAE Wrought Aluminum Alloys February 1991 页
SAE J459-1991 Bearing and Bushing Alloys October 1991 页
SAE J460-1991 Bearing Bushing Alloys Chemical Composition of SAE Bearing and Bushing Alloys 页
SAE J461-1981(E 2002) Wrought and Cast Copper Alloys 页
SAE J46-1973(R1993) Wheel-Slip Brake-Control System Road Test Code 页
SAE J462-1976(R1981) Cast Copper Alloys 页
SAE J463-1981(E 2002) Wrought Copper and Copper Alloys 页
SAE J464-1979(R1989) Magnesium Alloys April 1979 页
SAE J465-1983(R1989) Magnesium Casting Alloys June 1983 页
SAE J466-1979(R1989) Magnesium Wrought Alloys April 1979 页
SAE J467B-1968 Special Purpose Alloys ("Superalloys") October 1968 页
SAE J468-1988 Zinc Alloy Ingot and Die Casting Compositions December 1988 页
SAE J469-1983(R1989) Zinc Die Casting Alloys 页
SAE J470C-1976 Wrought Nickel and Nickel-Related Alloys July 1976 页
SAE J471D-1973 Sintered Powder Metal Parts: Ferrous August 1973 页
SAE J47-2005 Maximum Sound Level Potential for Motorcycles 页
SAE J473A-1962 Solders June 1962 页
SAE J474-1972(R1985) Electroplating and Related Finishes 页
SAE J476A-1961 Dryseal Pipe Threads June 1961 页
SAE J48-1983(R1993) Guidelines for Liquid Level Indicators 页
SAE J482-2006 Hexagon High Nuts 页
SAE J483-2006 High and Low Crown (Blind, Acorn) Hex Nuts 页
SAE J485-1995(R1998) Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins 页
SAE J490-1996 (R) Ball Joints September 1996 页
SAE J491-1987 Steering Ball Studs and Socket Assemblies November 1987 页
SAE J49-1980 Specification Definitions - Hydraulic Backhoes April 1980 页
SAE J492-2005 (R) Guide for Rivet Selection and Design Consideration 页
SAE J493-1961 Rod Ends and Clevis Pins June 1961 页
SAE J499A-1975 Parallel Side Splines for Soft Broached Holes in Fittings October 1975 页
SAE J501-1948 Shaft Ends May 1948 页
SAE J502-1972 Woodruff Keys September 1972 页
SAE J503-1959 Woodruff Key Slots and Keyways May 1959 页
SAE J506-1978(R1995) Sleeve Type Half Bearings November 1978 页
SAE J510-1985(R1992) Leaf Springs for Motor Vehicle Suspension - Made to Customary U.S. Units 页
SAE J511-1970(R1989) Pneumatic Spring Terminology 页
SAE J51-2004 Refrigerant 12 Automotive Air-Conditioning Hose 页
SAE J512-1997 Automotive Tube Fittings 页
SAE J513-1999 Refrigeration Tube Fittings - General Specifications 页
SAE J514-2004 Hydraulic Tube Fittings 页
SAE J515-2001 Specification for Hydraulic O-Ring Materials, Properties, and Sizes for Metric and Inch Stud Ends, Face Seal Fitting and Four-Screw Flange Tube Connections 页
SAE J516-2005 (R) Hydraulic Hose Fittings 页
SAE J517-2006 Hydraulic Hose 页
SAE J518-1993 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type June 1993 页
SAE J524-1996 (R) Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring February 1996 页
SAE J525-1999 (R) Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring 页
SAE J526-2000 Welded Low-Carbon Steel Tubing FSC 4710 页
SAE J527-2000 (R) Brazed Double Wall Low-Carbon Steel Tubing 页
SAE J530-1995 Automotive Pipe Fittings May 1995 页
SAE J531-1995 Automotive Pipe, Filler, and Drain Plugs May 1995 页
SAE J532-1993 (R) Automotive Straight Thread Filler and Drain Plugs June 1993 页
SAE J533-1999 Flares for Tubing 页
SAE J534-1998 Lubrication Fittings 页
SAE J537-2000 (R) Storage Batteries 页
SAE J539-1993 Voltages for Diesel Electrical Systems November 1993 页
SAE J541-1996 (R) Voltage Drop for Starting Motor Circuits October 1996 页
SAE J542-1991 Starting Motor Mountings June 1991 页
SAE J543-1995 (R) Starting Motor Pinions and Ring Gears November 1995 页
SAE J544-1996 (R) Electric Starting Motor Test Procedure 页
SAE J548-1-2000 (R) Spark Plugs 页
SAE J548-2-2000 Spark Plug Installation Sockets 页
SAE J549-1999 Preignition Rating of Spark Plugs 页
SAE J551-11-2000 Vehicle Electromagnetic Immunity - Off-Vehicle Source 页
SAE J551-1-2002 (R) Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles, Boats (up to 15 m), and Machines (50 Hz TO 18 GHz) 页
SAE J551-12-1996 Vehicle Electromagnetic Immunity - On-Board Transmitter Simulation 页
SAE J551-13-2003 (R) Vehicle Electromagnetic Immunity - Bulk Current Injection 页
SAE J551-15-2002 (R) Vehicle Electromagnetic Immunity - Electrostatic Discharge (ESD) 页
SAE J551-16-2005 Electromagnetic ImmunityOff-Vehicle Source (Reverberation Chamber Method) Part 16Immunity to Radiated Electromagnetic Fields 页
SAE J551-17-2003 (R) Vehicle Electromagnetic Immunity - Power Line Magnetic Fields 页
SAE J551-2-1994 Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles, Motorboats, and Spark-Ignited Engine-Driven Devices March 1994 页
SAE J551-4-1994(R2000) Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles and Devices, Broadband and Narrowband, 150 kHz to 1000 MHz 页
SAE J551-5-2004 Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles, Broadband, 9 kHz to 30 MHz 页
SAE J553-2004 Circuit Breakers 页
SAE J554-1987 Electric Fuses (Cartridge Type) August 1987 页
SAE J560-2004 (R) Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable 页
SAE J561-1993(R2006) Electrical Terminals - Eyelet and Spade Type 页
SAE J56-1999 (R) Road Vehicles - Alternators with Regulators - Test Methods and General Requirements 页
SAE J563-1978(R1990) Six- and Twelve-Volt Cigar Lighter Receptacles 页
SAE J564-1990 Headlamp Beam Switching March 1990 页
SAE J565-1989 Semiautomatic Headlamp Beam Switching Devices June 1989 页
SAE J567-1998 (R) Lamp Bulb Retention System 页
SAE J57-1994(R2000) Sound Level of Highway Truck Tires 页
SAE J572-1998(R2004) Requirements for Sealed Lighting Unit for Construction and Industrial Machines 页
SAE J573-1998 (R) Miniature Lamp Bulbs 页
SAE J575-2006 (R) Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 mm in Overall Width 页
SAE J576-1991 (R) Plastic Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices 页
SAE J577-2005 Vibration Test Machine and Operation Procedure 页
SAE J578-2002 (R) Color Specification 页
SAE J581-2004 Auxiliary Upper Beam Lamps 页
SAE J58-1993(R1998) Flanged 12-Point Screws 页
SAE J583-2005 (R) Front Fog Lamp : 2006 [Superseded: SAE J2510, SAE J2510] 页
SAE J584-2003 Motorcycle Headlamps 页
SAE J585-2000 (R) Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width 页
SAE J586-2000 Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width 页
SAE J587-2003 License Plate Illumination Devices (Rear Registration Plate Illumination Devices) 页
SAE J588-2000 Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width 页
SAE J589B-1977 Turn Signal Switch October 1977 页
SAE J591-2003 Spot Lamps 页
SAE J592-2000(R2005) Sidemarker Lamps for Use on Road Vehicles Less Than 2032 mm in Overall Width 页
SAE J593-2005 Backup Lamps (Reversing Lamps) 页
SAE J594-1995(R2003) Reflex Reflectors 页
SAE J595-2005 (R) Directional Flashing Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles 页
SAE J599-1997 (R) Lighting Inspection Code 页
SAE J600-1993 (R) Headlamp Aim Test Machines February 1993 页
SAE J602-1989 Headlamp Aiming Device for Mechanically Aimable Headlamp Units December 1989 页
SAE J604-1958(R1995) Engine Terminology and Nomenclature - General 页
SAE J609-2003 (R) Mounting Flanges and Power Take-Off Shafts for Small Engines 页
SAE J614-1995 Engine and Transmission Dipstick Marking 页
SAE J615-1991(R1995) Engine Mountings 页
SAE J616-1990(R1995) Engine Foot Mounting (Front and Rear) 页
SAE J617-1992 (R) Engine Flywheel Housing and Mating Transmission Housing Flanges 页
SAE J618-1991 Flywheels for Single-Plate Spring-Loaded Clutches January 1991 页
SAE J619-1993 Flywheels for Two-Plate Spring-Loaded Clutches December 1993 页
SAE J620-1988(R1993) Flywheels for Industrial Engines Used with Industrial Power Take-Offs Equipped with Driving-Ring Type Overcenter Clutches and Engine-Mounted Marine Gears and Single Bearing Engine-Mounted Power Generators 页
SAE J621-1989(R1995) Industrial Power Take-Offs with Driving Ring-Type Overcenter Clutches April 1989 页
SAE J626-1988(R1998) Diesel Fuel Injection - End-Mounting Flanges for Fuel Injection Pumps 页
SAE J629-1991(R2002) Diesel Fuel Injector Assembly - Flange Mounted Types 5 and 6 页
SAE J631-1998 (R) Radiator Nomenclature 页
SAE J635-1984(R1995) Fan Hub Bolt Circles and Pilot Holes 页
SAE J636-1992(R2001) V-Belts and Pulleys 页
SAE J637-1997(R2001) Automotive V-Belt Drives 页
SAE J638-1982(R1998) Motor Vehicle Heater Test Procedure 页
SAE J639-2005 (R) Safety Standards for Motor Vehicle Refrigerant Vapor Compresssions Systems 页
SAE J640-2000 Symbols for Hydrodynamic Drives 页
SAE J641-1993(R2000) Hydrodynamic Drives Terminology 页
SAE J64-1988(R1995) Vehicle Identification Numbers - Snowmobiles 页
SAE J643-1989(R2000) Hydrodynamic Drive Test Code 页
SAE J645-1992(R1997) Automotive Transmission Terminology 页
SAE J646-1969(R2000) Planetary Gear(s) - Terminology October 1969 页
SAE J647-1997 (R) Transmissions - Schematic Diagrams 页
SAE J648-2000 Automatic Transmission Hydraulic Control Systems - Terminology 页
SAE J649-1994(R2000) Automatic Transmission Functions - Terminology 页
SAE J651-2005 Passenger Car and Light Truck Automatic Transmission and Automatic Transaxle Test Code 页
SAE J656-1988 Automotive Brake Definitions and Nomenclature April 1988 页
SAE J661-1997 (R) Brake Lining Quality Test Procedure 页
SAE J662-1990(R1997) Brake Block Chamfer 页
SAE J663-2001 Rivets for Brake Linings and Bolts for Brake Blocks 页
SAE J670E-1976 Vehicle Dynamics Terminology, Recommended Practice 页
SAE J671-1997 (R) Vibration Damping Materials and Underbody Coatings 页
SAE J67-1972(R1998) Shovel Dipper, Clam Bucket, and Dragline Bucket Rating 页
SAE J673-2005 (R) Automotive Safety Glasses 页
SAE J674-2005 (R) Safety Glazing Materials - Motor Vehicles and Motor Vehicle Equipment 页
SAE J678-1984(R1988) Speedometers and Tachometers - Automotive, Recommended Practice 页
SAE J680-1988 Location and Operation of Instruments and Controls in Motor Truck Cabs, Recommended Practice 页
SAE J68-2004 Tests for Snowmobile Switching Devices and Components 页
SAE J682-2003 Rear Wheel Splash and Stone Throw Protection 页
SAE J683-1985 Tire Chain Clearance- Trucks, Buses (Except Suburban, Intercity, and Transit Buses), and Combinations of Vehicles, Information Report August 1985 页
SAE J684-2005 Trailer Couplings, Hitches, and Safety ChainsAutomotive Type 页
SAE J686-1999 Motor Vehicle License Plates 页
SAE J689-1996 (R) Curbstone Clearance, Approach, Departure, and Ramp Breakover Angles - Passenger Car and Light Truck, Recommended Practice June 1996 页
SAE J691-1990 Motor Truck CA Dimensions, Recommended Practice September 1990 页
SAE J693-1989 Truck Overall Widths Across Dual Tires, Information Report April 1989 页
SAE J694-2001 Disc Wheel/Hub or Drum Interface Dimensions - Commercial Vehicles 页
SAE J695-1989(R1998) Turning Ability and Off Tracking - Motor Vehicles 页
SAE J697-1988 Safety Chain of Full Trailers or Converter Dollies, Recommended Practice May 1988 页
SAE J699-1985 Average Vehicle Dimensions for Use in Designing Docking Facilities for Motor Vehicles, Recommended Practice November 1985 页
SAE J700-1985(R2001) Upper Coupler Kingpin - Commercial Trailers and Semitrailers 页
SAE J701-1984 Truck Tractor Semitrailer Interchange Coupling Dimensions, Information Report August 1984 页
SAE J702-2003 (R) Brake and Electrical Connection Locations - Truck-Tractor and Truck-Trailer 页
SAE J703-1954(R2000) Fuel Systems - Truck and Truck Tractors 页
SAE J704-1992(R2000) Openings for Six- and Eight-Bolt Truck Transmission Mounted Power Take-Offs 页
SAE J706-2003 Rating of Winches 页
SAE J709-1977 Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures, Standard; May 1977 (ASAE S295.2); Formerly referred to as J709D 页
SAE J711-1991 Tire Selection Tables for Agricultural Tractors of Future Design, Recommended Practice March 1991 (ASAE S220.4) 页
SAE J712-1949(R1999) Industrial and Agricultural Disc Wheels 页
SAE J714-1986(R1993) Wheel Mounting Elements for Industrial and Agricultural Disc Wheels, Recommended Practice (ASAE S218.2) 页
SAE J731-1985 Component Nomenclature- Loader, Standard; 页
SAE J732-1992 (R) Specification Definitions - Loaders 页
SAE J737-1989(R2006) Hole Spacing for Scraper and Dozer Cutting Edges 页
SAE J738-1986 Cutting Edge-Double Bevel Cross Sections, Standard June 1986 页
SAE J739-1991(R2006) Cutting EdgeCurved Grader 页
SAE J740-1986(R2006) Countersunk Square Holes for Cutting Edges and End Bits 页
SAE J744-1996 Hydraulic Pump and Motor Mounting and Drive Dimensions, Standard June 1996 页
SAE J745-1987(R1996) Hydraulic Power Pump Test Procedure, Recommended Practice Supersedes NFPA T3.9.20 页
SAE J746-1955(R1996) Hydraulic Motor Test Procedures, Recommended Practice December 1955 页
SAE J747-1990 Control Valve Test Procedure, Standard May 1990 页
SAE J748-1957(R1986) Hydraulic Directional Control Valves, 3000 psi Maximum, Recommended Practice 页
SAE J751-1997 (R) Off-Road Tire and Rim Classification - Construction Machines 页
SAE J75-1999(R2006) Motor Vehicle Brake Fluid Container Compatibility 页
SAE J753-1991(R2006) Maintenance Interval Chart 页
SAE J754A-1972 Lubricant Types - Construction and Industrial Machinery, Information Report January 1972 页
SAE J755-1950(R1980) Marine Propeller-Shaft Ends and Hubs, Standard; 页
SAE J759-2001 (R) Lighting Identification Code 页
SAE J760-1999(R2004) Dimensional Specifications for General Service Sealed Lighting Units 页
SAE J764-1995(R2006) Loading Ability Test ProcedureScrapers 页
SAE J765-1990 Crane Load Stability Test Code October 1990 页
SAE J771-1986 Automotive Printed Circuits, Standard April 1986 页
SAE J772-2004 Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs 页
SAE J773-1976(R1998) Conical Spring Washers 页
SAE J774-2000(R2006) (R) Emergency Warning Device and Emergency Warning Device Protective Container 页
SAE J775-2004 (R) Engine Poppet Valve Information Report 页
SAE J78-1998 Steel Self-Drilling Tapping Screws 页
SAE J782B-1980 Motor Vehicle Seating Manual, Recommended Practice 页
SAE J79-1972 Brake Disc and Drum Thermocouple Installation 页
SAE J792A-1968 SAE Manual on Blast Cleaning, Information Report June 1968 页
SAE J800-1994 (R) Motor Vehicle Seat Belt Assembly Installation, Recommended Practice June 1994 页
SAE J80-2004 Automotive Rubber Mats 页
SAE J810-1996 (R) Classification of Common Surface Imperfections in Sheet Steel, Information Report March 1996 页
SAE J811-1981 Surface Rolling and Other Methods for Mechanical Prestressing of Metals, Information Report; August 1981 页
SAE J81-1997 Thread Rolling Screws 页
SAE J814-1999 Engine Coolants 页
SAE J815-2002 Load Deflection Testing of Urethane Foams for Automotive Seating 页
SAE J817-1-1991 Engineering Design Serviceability Guidelines - Construction and Industrial Machinery - Serviceability Definitions - Off-Road Work Machines, Information Report March 1991 页
SAE J817-2-1991 Engineering Design Serviceability Guidelines - Construction and Industrial Machinery - Maintainability Index - Off-Road Work Machines, Information Report March 1991 页
SAE J818-1987 Rated Operating Load for Loaders, Standard May 1987 页
SAE J819-1987(R1995) Engine Cooling System Field Test (Air-to-Boil), Standard; March 1987; Superseded by SAE J1393 页
SAE J820-1980(R1998) Crane Hoist Line Speed and Power Test Code 页
SAE J82-1998(R1998) Mechanical and Quality Requirements for Machine Screws 页
SAE J823-1994 Flasher Test, Standard January 1994 页
SAE J824-1962(R1995) Engine Rotation and Cylinder Numbering, Standard; 页
SAE J826-1995 (R) Devices for Use in Defining and Measuring Vehicle Seating Accommodation, Standard 页
SAE J827-1996(R2005) High-Carbon Cast-Steel Shot 页
SAE J829-2005 Fuel Tank Filler Cap and Cap Retainer 页
SAE J830-1999 Fuel Injection Equipment Nomenclature 页
SAE J831-1998 Electrical Definitions Reissued 页
SAE J835-1981(R1995) Split Type Bushings - Design and Application, Standard; 页
SAE J836-1970 Automotive Metallurgical Joining, Information Report 页
SAE J839-1998 Passenger Car Side Door Latch Systems 页
SAE J840-1998 Test Procedures for Brake Shoe and Lining Bonds 页
SAE J843-1990(R1997) Brake System Road Test Code - Passenger Car and Light-Duty Truck 页
SAE J844-2004 (R) Nonmetallic Air Brake System Tubing 页
SAE J845-1997 (R) Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles 页
SAE J846-2004 Coding Systems for Identification of Fluid Conductors and Connectors 页
SAE J847-1987 Trailer Tow Bar Eye and Pintle Hook/ Coupler Performance, Recommended Practice November 1987 页
SAE J848-1984(R2001) Fifth Wheel Kingpin, Heavy-Duty - Commercial Trailers and Semitrailers 页
SAE J849-2003 Connection and Accessory Locations for Towing Multiple Trailers 页
SAE J850-2000 Fixed Rigid Barrier Collision Tests 页
SAE J851-2001 Dimensions - Wheels for Demountable Rims, Demountable Rims, and Spacer Bands - Commercial Vehicles 页
SAE J852-2001 (R) Front Cornering Lamps for Use on Motor Vehicles 页
SAE J853-1981 Vehicle Identification Numbers, Standard December 1981 页
SAE J855-2002 Test Method of Stretch and Set of Textiles and Plastics 页
SAE J858-2001(R2006) Electrical Terminals Blade Type 页
SAE J860-2003 Test Method for Measuring Mass (Weight) of Organic Trim Materials 页
SAE J861-2003 (R) Method of Testing Resistance to Crocking of Organic Trim Materials 页
SAE J862-1981(R1989) Factors Affecting Accuracy of Mechanically Driven Automotive Speedometer and Odometers, Information Report; June 1981 页
SAE J863-1963(R1986) Methods of Determining Plastic Deformation in Sheet Metal Stampings, Recommended Practice 页
SAE J864-1984(R1993) Surface Hardness Testing with Files, Recommended Practice 页
SAE J866-2002 Friction Coefficient Identification System for Brake Linings 页
SAE J873-2003 Drag Force Test Procedure for Construction, Forestry, and Industrial Machines 页
SAE J875-1999 (R) Trailer Axle Alignment 页
SAE J876-2000 (R) Wide Base Disc Wheels and Demountable Rims 页
SAE J879B-1968 Motor Vehicle Seating Systems, Recommended Practice July 1968 页
SAE J880-1997 (R) Brake System Rating Test Code - Commercial Vehicles 页
SAE J881-1968(R1985) Lifting Crane Sheave and Drum Sizes, Standard; 页
SAE J88-2006 (R) Sound Measurement - Off-Road Work Machines - Exterior 页
SAE J882-2002 (R) Test Method for Measuring Thickness of Automotive Textiles and Plastics 页
SAE J883-2002 Test Method for Determining Dimensional Stability of Automotive Textile Materials 页
SAE J884-1991 Liquid Ballast Table for Drive Tires of Agricultural Tractors, Recommended Practice March 1991 (ASAE S346.1) 页
SAE J885-2003 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design 页
SAE J887-2004 School Bus Warning Lamps 页
SAE J891-2004 Spring Nuts 页
SAE J89-1985(R1995) Dynamic Cushioning Performance Criteria for Snowmobile Seats January 1985 页
SAE J892-1996 (R) Push-On Spring Nuts Inch Series - General Specifications, Standard August 1996 页
SAE J892M-1996 (R) Push-On Spring Nuts Metric Series - General Specifications, Standard August 1996 页
SAE J896-1983 Mounting Flanges for Engine Accessory Drives, Recommended Practice May 1983 页
SAE J899-1988 Operator? Seat Dimensions for Off-Road Self-Propelled Work Machines, Standard December 1988 页
SAE J900-1985(R1995) Crankcase Emission Control Test Code, Standard; 页
SAE J901-1985(R2000) Universal Joints and Driveshafts - Nomenclature - Terminology - Application 页
SAE J90-1990(R1995) Standard Classification System for Nonmetallic Automotive Gasket Materials 页
SAE J902-2003 Passenger Car Windshield Defrosting Systems 页
SAE J903-1999 (R) Passenger Car Windshield Wiper Systems 页
SAE J905-1999 (R) Fuel Filter Test Methods 页
SAE J910-1988 Hazard Warning Signal Switch, Standard October 1988 页
SAE J911-1998 (R) Surface Roughness and Peak Count Measurement of Cold-Rolled Steel Sheet 页
SAE J912-2002 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials 页
SAE J913-2004 Test Method for Wicking of Automotive Fabrics and Fibrous Materials 页
SAE J914-2003 Side Turn Signal Lamps for Vehicles Less Than 12 m in Length 页
SAE J915-2000 Automatic Transmissions - Manual Control Sequence 页
SAE J917-2004 (R) Marine Push-Pull Control Cables 页
SAE J918C-1970 Passenger Car Tire Performance Requirements and Test Procedures, Standard May 1970 页
SAE J919-1995 (R) Sound Measurement - Off-Road Work Machines - Operator - Singular Type, Standard April 1995 页
SAE J920-1985 Technical Publications for Off-Road Work Machines, Recommended Practice September 1985 页
SAE J92-1976(R1995) Snowmobile Throttle Control Systems 页
SAE J922-1988(R1995) Turbocharger Nomenclature and Terminology, Recommended Practice 页
SAE J923-2001 Nomenclature and Terminology for Truck and Bus Drive Axles 页
SAE J924-1981(R1995) Thrust Washers - Design and Application, Standard; 页
SAE J927-1988(R1995) Flywheels for Engine-Mounted Torque Converters, Recommended Practice 页
SAE J928-2006 Electrical Terminals - Pin and Receptacle Type 页
SAE J930-1995 (R) Storage Batteries for Off-Road Self-Propelled Work Machines, Standard June 1995 页
SAE J931-1965(R1986) Hydraulic Power Circuit Filtration 页
SAE J932-1965(R1985) Definitions for Macrostrain and Microstrain 页
SAE J933-2005 Mechanical and Quality Requirements for Tapping Screws 页
SAE J934-1998 Vehicle Passenger Door Hinge Systems Reissued 页
SAE J935-1965(R2002) High-Strength Carbon and Alloy Die Drawn Steels 页
SAE J940-1994 Glossary of Carbon Steel Sheet and Strip Terms, Information Report October 1994 页
SAE J941-2002 (R) Motor Vehicle Drivers?Eye Locations 页
SAE J942-1999 (R) Passenger Car Windshield Washer Systems 页
SAE J947-2003 Glossary of Fiberboard Terminology 页
SAE J948-2003 Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth 页
SAE J949-2003 (R) Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates 页
SAE J951-1966(R1985) Florida Exposure of Automotive Finishes, Information Report; June 1966 页
SAE J95-1973(R1986) Headlamps for Industrial Equipment 页
SAE J953-1984(R1999) Passenger Car Backlight Defogging System 页
SAE J958-1989(R2003) Nomenclature and Dimensions for Crane Shovels 页
SAE J959-1991 Lifting Crane, Wire-Rope Strength Factors May 1991 页
SAE J960-1991(R2001) Marine Control Cable Connection - Engine Clutch Lever June 1991 页
SAE J961-1991(R2001) Marine Control Cable Connection - Engine Throttle Lever June 1991 页
SAE J96-1973(R2005) Flashing Warning Lamp for Industrial Equipment 页
SAE J964-1998(R2003) Recommended Practice for Measuring Haze and Reflectance of Mirrors 页
SAE J965-1966 Abrasive Wear, Information Report August 1966 页
SAE J966-2000 (R) Test Procedure for Measuring Passenger Car Tire Revolutions per Mile November 2000 页
SAE J967-1999(R2002) Calibration Fluid for Diesel Injection Equipment 页

     SAE J968-1-1991(R1995) Diesel Injection Pump Testing - Part 1: Calibrating Nozzle and Holder Assemblies 页
SAE J968-2-1991(R1995) Diesel Injection Pump Testing - Part 2: Orifice Plate Flow Measurement 页
SAE J971-1991(R2000) Brake Power Rating Test Code - Commercial Vehicle Inertia Dynamometer 页
SAE J972-2000 Moving Rigid Barrier Collision Tests 页
SAE J973-1999 Ignition System Measurements Procedure 页
SAE J974-1973(R2002) Flashing Warning Lamp for Agricultural Equipment 页
SAE J975-1967(R1993) Headlamps for Agricultural Equipment, Standard; June 1967 页
SAE J98-1992(R2004) Personnel Protection for General Purpose Industrial Machines 页
SAE J983-1998 Crane and Cable Excavator Basic Operating Control Arrangements 页
SAE J985-1995(R2002) Vision Factors Considerations in Rearview Mirror Design 页
SAE J986-1998 Sound Level for Passenger Cars and Light Trucks 页
SAE J987-2003 Lattice Boom CranesMethod of Test 页
SAE J990-1987(R2004) Nomenclature - Industrial and Agricultural Mowers 页
SAE J99-1973(R2003) Lighting and Marking of Industrial Equipment on Highways 页
SAE J993-1973(R1989) Alloy and Temper Designation Systems for Aluminum, Standard; September 1973 页
SAE J994-2003 AlarmBackupElectric Laboratory Performance Testing 页
SAE J995-1999 (R) Mechanical and Material Requirements for Steel Nuts 页
SAE J997-1995(R2000) Spark Arrester Test Carbon 页
SAE J999-1979(R1998) Crane Boom Hoist Disengaging Device 页
SAE JA1000-1-1999 Reliability Program Standard Implementation Guide 页
SAE JA1000-1998 Reliability Program Standard 页
SAE JA1002-2004 Software Reliability Program Standard 页
SAE JA1003-2004 Software Reliability Program Implementation Guide 页
SAE JA1004-2004 Software Supportability Program Standard 页
SAE JA1005-2004 Software Supportability Program Implementation Guide 页
SAE JA1006-2004 Software Support Concept 页
SAE JA1010-1-2004 Maintainability Program Standard Implementation Guide 页
SAE JA1010-2000 Maintainability Program Standard 页
SAE JA1011-1999 Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes referencing Meassage Specification 页
SAE JA1012-2002 A Guide to the Reliability-Centered Maintenance (RCM) Standard 页
SAE MA 1339-1998(R2004) Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 21,000 kPa, 204 Degrees C, Lightweight, Hydraulic and Pneumatic, Metric 页
SAE MA 1370-1990(R2006) Screw Threads - MJ Profile, Metric [Superseded: SAE AS 1338, SAE AS 1338, SAE AS 1338, SAE AS 1370A] 页
SAE MA 1421-1996(R2006) Aerospace Selected Diameter-Pitch Combinations of Metric 60 Degrees Screw Threads for Shaft or Bearing Retaining Screw Threads 页
SAE MA 14241-2000(R2004) CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC FSC 5340 页
SAE MA 14242-2000(R2004) CLAMP, LOOP, CUSHIONED, CENTER MOUNTING, METRIC FSC 5340 页
SAE MA 14272-2000(R2004) CLAMP, LOOP, CUSHIONED, ELONGATED, METRIC FSC 5340 页
SAE MA 14298-2000(R2004) CLAMP ASSEMBLY, CUSHIONED, METRIC FSC 5340 页
SAE MA 14489-2000(R2004) CLAMP, LOOP, METAL, PLAIN, SUPPORT, AIRCRAFT, METRIC FSC 5340 页
SAE MA 1508-1996(R2006) Undercuts for Straight Screw Threads - Metric 页
SAE MA 1518B-1998(R2004) Bolts, Screws and Nuts - External Wrenching, Metric Threads - Design Parameters for 页
SAE MA 1520A-2001(R2006) Areas for Calculating Stress or Load Values for Metric MJ Externally Threaded Fasteners 页
SAE MA 1547A-1989(R1991) Wrenches, Twelve Spline, Metric 页
SAE MA 1549-1980(R2001) Wrenching Configuration, 12 Spline, for Metric Threaded Fasteners 页
SAE MA 1565A-1996(R2006) Inserts, Screw Thread, Helical Coil Metric Series Procurement Specification for FSC5340 FSC 5340 页
SAE MA 1566A-1992(R2006) Gaging Practice and Gage Requirements for MJ Metric Screw Threads 页
SAE MA 1567B-1996(R2006) Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For 页
SAE MA 1568-1987(R2006) Nut, Self Locking - UNS S66286, 425 Degrees C& 650 Degrees C, 1100 MPa, MJ Thread, Procurement Specification for, Metric FSC 5310 页
SAE MA 1573-1988(R2004) Nut, Self-Locking - Steel, Class 1100 MPa/235?, MJ Thread Procurement Specification For, Metric FSC 5310 页
SAE MA 1586A-1987(R1992) Wrench Configuration, 12 Spline Drive, Metric 页
SAE MA 1633-1998(R2004) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, STRAIGHT TO STRAIGHT 页
SAE MA 1634-1998(R2004) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, STRAIGHT TO 45 DEGREES 页
SAE MA 1635-1998(R2004) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, STRAIGHT TO 90 DEGREES 页
SAE MA 1636-1998(R2004) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, 45 DEGREES TO 45 DEGREES 页
SAE MA 1637-1998(R2004) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, 45 DEGREES TO 90 DEGREES 页
SAE MA 1638-1998(R2004) Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, 90 Degrees to 90 Degrees 页
SAE MA 1696A-2001(R2006) Screw Threads, Metric Buttress - MJB Profile 页
SAE MA 1759A-1996(R2006) Center Hole, Metric 页
SAE MA 1784-1987(R2006) Spacers and Washers, Procurement Specification for, Metric FSC 5310& 5365 页
SAE MA 1806-1990(R2006) Spring Clips and Cushion Selection for Metal Tube Support, Metric FSC 5340 页
SAE MA 1937-1985(R2006) Nut, Hex, Free Running, Procurement Specification for, Metric 页
SAE MA 1943A-1990(R2006) Nuts, Self-Locking, UNS N07001 730 Degrees C, 1100 MPa, and 1210 MPa Procurement Specification for, Metric FSC 5310 页
SAE MA 1975-1994(R2004) Hose Assemblies, Polytetrafluoroethylene, Aramid Reinforced, 135 Degrees C, Standard Duty, 28 000/21 000 kPa, Hydraulic, Aircraft Systems Superseding MA 2140 页
SAE MA 2001B-1993(R2001) Aerospace Fluid Systems and Components - Pressure and Temperature Classifications 页
SAE MA 2002A-1988(R2001) Impulse Testing of Hydraulic Hose, Tubing and Fitting Assemblies 页
SAE MA 2003-1981(R2001) Rotary Flexure Testing of Hydraulic Tubing Joints and Fittings 页
SAE MA 2004A-1989(R2004) Thermal Shock Testing of Fluid System Piping and Fittings ISO 6773 页
SAE MA 2005B-1995(R2001) Tube Fittings, Aerospace Fluid Systems, Separable, for 24 Degree Cone - General Specification, Metric (ISO 7169) 页
SAE MA 2006-1988(R2004) Hydraulic Tubing - Qualification Test Requirements Same as ISO/DIS 8574 页
SAE MA 2007A-1984(R2001) Hose Assembly, Tetrafluoroethylene, Lightweight, 204 Degrees C, 21 000 kPa Hydraulic, Metric 页
SAE MA 2008-1990(R2004) Radii-Tube Bend, Metric 页
SAE MA 2010-1987(R2006) Packing, Preformed - O-Ring Seal Standard Sizes& Size Codes, Metric FSC 5330 页
SAE MA 2012B-1997(R2001) (R) Port, Internal, Straight Thread, Fitting Connection, Design Standard, Metric FSC 4730 页
SAE MA 2014A-1996(R2001) Fitting End, Acorn Flareless, Design Standard, Metric FSC 4730 页
SAE MA 2023A-1996(R2001) (R) Alternate Dimensions, Center Body Section, Shape Fluid Fitting, Design Standard, Metric FSC 4730 页
SAE MA 2024-1995(R2001) Flange Profiles, V-Coupling, Design Standard, Metric FSC 5340 页
SAE MA 2025B-2003 (R) UNION, FLARELESS, NON-REDUCER, METRIC FSC 4730 页
SAE MA 2026B-1997(R2001) (R) Fitting, Elbow, 90 Degree, Thin Wall, Flareless, Metric FSC 4730 页
SAE MA 2027B-1997(R2001) (R) Fitting, Tee, Thin Wall, Flareless, Metric FSC 4730 页
SAE MA 2028B-1997(R2001) (R) Fitting, Cross, Thin Wall, Flareless, Metric FSC 4730 页
SAE MA 2029B-1997(R2001) (R) Fitting, Elbow, 45 Degree, Thin Wall, Bulkhead, Flareless, Metric FSC 4730 页
SAE MA 2030B-1997(R2001) (R) Fitting, Elbow, 90 Degree, Thin Wall, Bulkhead, Flareless, Metric FSC 4730 页
SAE MA 2031B-1997(R2001) (R) Fitting, Tee, Thin Wall, Bulkhead on Run, Flareless, Metric FSC 4730 页
SAE MA 2032B-1997(R2001) (R) Fitting, Tee, Bulkhead and Boss on Run, Flareless, Metric FSC 4730 页
SAE MA 2033B-1997(R2001) (R) Fitting, Tee, Flareless, Bulkhead on Run, Boss on Side, Metric FSC 4730 页
SAE MA 2034B-1997(R2001) (R) Fitting, Tee, Thin Wall, Bulkhead on Side, Flareless, Metric FSC 4730 页
SAE MA 2035B-2003 (R) PLUG, FLARELESS TUBE, METRIC FSC 4730 页
SAE MA 2036A-1992(R2004) Cap Assembly, Pressure Seal, Flareless Tube, Metric FSC 4730 页
SAE MA 2037A-1992(R2004) Bushing, Screw Thread Expander, Flareless Tube, Metric FSC 4730 页
SAE MA 2038B-2003 (R) UNION, REDUCER, FLARELESS TUBE, METRIC FSC 4730 页
SAE MA 2039A-1990(R2001) Plug, Port - MJ Thread, O-Ring Seal, AMS-5640, Metric FSC 4730 页
SAE MA 2040B-1996(R2001) Nut, Flareless, Metric FSC 4730 页
SAE MA 2041B-2003 (R) SLEEVE, COUPLING, FLARELESS, METRIC FSC 4730 页
SAE MA 2042A-1997(R2001) (R) Fitting, Adapter, Port Connection to Flareless, Metric FSC 4730 页
SAE MA 2043B-2003 (R) UNION, BULKHEAD, FLARELESS TUBE, METRIC FSC 4730 页
SAE MA 2046A-1993(R2004) Adapter Flareless Metric to Inch FSC 4730 页
SAE MA 2047C-1997(R2001) Nut, Retained, Flareless, Metric FSC 4730 页
SAE MA 2048B-2005 (R) FITTING ASSEMBLY, ELBOW, 45 DEGREES, THIN WALL, RETAINED NUT, FLARELESS, METRIC FSC 4730 页
SAE MA 2049B-2005 (R) FITTING ASSEMBLY, TEE, THIN WALL, RETAINED NUT ON RUN, FLARELESS, METRIC FSC 4730 页
SAE MA 2050B-2005 (R) FITTING ASSEMBLY, ELBOW, 90 DEGREES, THIN WALL, RETAINED NUT, FLARELESS, METRIC FSC 4730 页
SAE MA 2051B-2005 (R) FITTING ASSEMBLY, TEE, THIN WALL, RETAINED NUT ON SIDE, FLARELESS, METRIC FSC 4730 页
SAE MA 2052-1993(R2004) Adapter, Flareless, Metric to Inch FSC 4730 页
SAE MA 2058B-2003 (R) UNION, REDUCER/EXPANDER BULKHEAD, FLARELESS TUBE, METRIC FSC 4730 页
SAE MA 2060A-1993(R2004) Fittings, Welded, Hydraulic, Titanium and Corrosion Resistant Steel, 21 000 kPa, Metric 页
SAE MA 2062A-1997(R2001) (R) Ring, Weld, 21,000 kPa, Cres, Metric FSC 4730 页
SAE MA 2063A-1997(R2001) (R) Tube End, Weld, Design Standard, Metric FSC 4730 页
SAE MA 2064A-1997(R2001) (R) Fitting,Sleeve, Flareless Acorn to Integral Weld Ring, 21,000 kPa, Metric FSC 4730 页
SAE MA 2065B-1997(R2001) (R) Fitting, Adapter, External Thread Flareless to Integral Weld Ring, 21,000 kPa, Metric FSC 4730 页
SAE MA 2066A-1997(R2001) (R) Fitting, Reducer, Integral Weld Ring, 21,000 kPa, Metric FSC 4730 页
SAE MA 2069A-1997(R2001) (R) Fitting Elbow, 90 Degree, Integral Weld Ring, 21,000 kPa, Metric FSC 4730 页
SAE MA 2070A-1997(R2001) (R) Fitting, Tee, Integral Weld Ring, 21,000 kPa, Metric FSC 4730 页
SAE MA 2071A-1997(R2001) (R) Fitting, Cross, Integral Weld Ring, 21,000 kPa, Metric FSC 4730 页
SAE MA 2076A-2003 (R) FITTING END, ACORN SHORT FLARELESS, DESIGN STANDARD, METRIC FSC 4730 页
SAE MA 2078A-1992(R2004) Test Methods, Hose Assemblies, Polytetafluoroethylene (PTFE), Metric Same as ISO 8829 页
SAE MA 2079-1987(R1991) Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric 页
SAE MA 2080-1989(R2001) Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DEG Cone, Straight to Straight, Lightweight, Metric FSC 4720 页
SAE MA 2081-1989(R2001) Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-Deg Cone, Straight to 45-Deg, Lightweight, Metric FSC 4720 页
SAE MA 2082-1989(R2001) Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-Deg Cone, Straight to 90-Deg, Lightweight, Metric FSC 4720 页
SAE MA 2083-1989(R2001) Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-Deg Cone, 45-Deg to 45-Deg, Lightweight, Metric FSC 4720 页
SAE MA 2084-1989(R2001) Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-Deg Cone, 45-Deg to 90-Deg, Lightweight, Metric FSC 4720 页
SAE MA 2085B-2005 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204 DEGREES C, 21,000 KPA, 60-DEG CONE, TO 90-DEG TO 90-DEG, LIGHTWEIGHT, METRIC FSC 4720 页
SAE MA 2086-1986(R2001) Hose Assembly, Tetrafluoroethylene, 21000 kPa, Flareless, Straight to Straight, Metric FSC 4720 页
SAE MA 2087-1986(R2001) Hose Assembly, Tetrafluoroethylene, 21000 kPa, Flareless, Straight to 45 Degrees, Metric FSC 4720 页
SAE MA 2088-1986(R2001) Hose Assembly, Tetrafluoroethylene, 21000 kPa, Flareless, Straight to 90 Degrees, Metric FSC 4720 页
SAE MA 2089-1986(R2001) Hose Assembly, Tetrafluoroethylene, 21000 kPa, Flareless, 45 Degrees to 45 Degrees, Metric FSC 4720 页
SAE MA 2090-1986(R2001) Hose Assembly, Tetrafluoroethylene, 21000 kPa, Flareless, 45 Degree to 90 Degree, Metric FSC 4720 页
SAE MA 2091-1986(R2001) Hose Assembly, Tetrafluoroethylene, 21000 kPa, Flareless, 90 Degrees to 90 Degrees, Metric FSC 4720 页
SAE MA 2093-1988(R2004) Fitting End, Dimensions, Fluid Systems Port Connection, Metric FSC 4730 页
SAE MA 2094-1995(R2001) Test Methods for Tube-Fitting Assemblies, Metric (ISO 10583) 页
SAE MA 2095C-2004 (R) FITTING END, 24?CONE, DESIGN STANDARD, METRIC FSC 4730 页
SAE MA 2096C-2004 (R) FITTING END, 24?CONE, BULKHEAD, DESIGN STANDARD, METRIC FSC 4730 页
SAE MA 2100-1989(R2001) Hose Assemblies, Metal Medium Pressure, High Temperature, Metric 页
SAE MA 2101A-2004 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, STRAIGHT TO STRAIGHT FITTING ENDS, METRIC FSC 4720 页
SAE MA 2102A-2004 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, STRAIGHT TO 45?FITTING ENDS, METRIC FSC 4720 页
SAE MA 2103A-2004 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, STRAIGHT TO 90?FITTING ENDS, METRIC FSC 4720 页
SAE MA 2104A-2004 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, 45?TO 45?FITTING ENDS, METRIC FSC 4720 页
SAE MA 2105A-2004 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, 45?TO 90?FITTING ENDS, METRIC FSC 4720 页
SAE MA 2106B-2004 HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, 90?TO 90?FITTING ENDS, METRIC FSC 4720 页
SAE MA 2110A-1988(R2004) Port, Ring Locked Design Standard Dimensions for FSC 4730 页
SAE MA 2111C-2006 Fitting Assembly, Adapter Ring Locked Port Connection to 8 Degrees 30' Beam Seal 28 000 kPa, Metric FSC 4730 页
SAE MA 2112B-1994(R2004) Adapter, Assembly - Port Connection Ring Locked to 24 Degree Flareless Tube End, Metric FSC 4730 页
SAE MA 2113B-1994(R2004) Adapter, Assembly - Port Connection Ring Locked to 60 Degrees Flareless Tube End, Metric FSC 4730 页
SAE MA 2114A-1988(R2004) Adapter - Port Connection, Ring Locked Installation and Removal of 页
SAE MA 2115-1988(R2004) Union, Flareless Tube or Boss FSC 4730 页
SAE MA 2116-1988(R2004) Union, Reducer, Flareless Tube or Boss FSC 4730 页
SAE MA 2117B-1996(R2001) Wire, Retainer, Swivel, Metric FSC 4730 页
SAE MA 2118B-1997(R2001) (R) Nut, Bulkhead, Fitting, Metric FSC 4730 页
SAE MA 2119A-1994(R2004) Fitting Assembly, Reducer Ring Locked Port Connection to Beam Seal 28 000 kPa, Metric FSC 4730 页
SAE MA 2120-1987(R1991) Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, Straight to Straight 页
SAE MA 2121-1987(R1991) Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, Straight to 45 Degrees 页
SAE MA 2122-1987(R1991) Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, Straight to 90 Degrees 页
SAE MA 2123-1987(R1991) Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, 45 Degrees to 45 Degrees 页
SAE MA 2124-1987(R1991) Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, 45 Degrees to 90 Degrees 页
SAE MA 2125-1987(R1996) Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, 90 Degrees to 90 Degrees 页
SAE MA 2126B-2005 Hose Assembly, Polytetrafluoroethylene (PTFE), up to 232 DEGREES C and 10 500 kPa Procurement Specification, Metric (ISO/DIS 10502) 页
SAE MA 2150/1-1991(R2001) CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, METRIC FSC 5340 页
SAE MA 2150/2-1991(R2001) CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, METRIC FSC 5340 页
SAE MA 2150/3-1991(R2001) CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HIGH TEMPERATURE, METRIC FSC 5340 页
SAE MA 2150/4-1991(R2001) CLAMP SUPPORT, LOOP CLAMP, METRIC FSC 5340 页
SAE MA 2150/5-1991(R2001) CLAMP, LOOP STYLE, WITH INSERT, HYDROCARBON FLUID RESISTANT, METRIC FSC 5340 页
SAE MA 2150/6-1991(R2001) CLAMP, LOOP STYLE, WITH INSERT, PHOSPHATE ESTER FLUID RESISTANT, METRIC FSC 5340 页
SAE MA 2150/7-1991(R2001) CLAMP, LOOP STYLE, WITH INSERT, HIGH TEMPERATURE, METRIC FSC 5340 页
SAE MA 2150-1993(R2004) Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric 页
SAE MA 2151/1-1991(R2004) Clamp, Saddle Type, Cushioned, Hydrocarbon Fluid Resistant, Metric FSC 5340 页
SAE MA 2151/2-1991(R2001) CLAMP, SADDLE TYPE, CUSHIONED, PHOSPHATE ESTER FLUID RESISTANT, METRIC FSC 5340 页
SAE MA 2151/3-1991(R2001) CLAMP, SADDLE TYPE, CUSHIONED, HIGH TEMPERATURE, METRIC FSC 5340 页
SAE MA 2151/4-1991(R2001) CLAMP, SADDLE TYPE, CUSHIONED, PTFE, METRIC FSC 5340 页
SAE MA 2151-1994(R2004) Clamp Assemblies, Saddle or Omega Style, Two Point Mount, Multiple Shapes, Metric 页
SAE MA 2152/1-1991(R2001) Clamp, Center Mount, Bare Metal, Aluminum, Metric FSC 5340 页
SAE MA 2152/2-1991(R2001) CLAMP, CENTER MOUNT, BARE METAL, STAINLESS STEEL, METRIC FSC 5340 页
SAE MA 2153/1-1991(R2001) Clamp, Loop Type, Bare Metal, Aluminum, Metric 页
SAE MA 2153/2-1991(R2001) Clamp, Loop Type, Bare Metal, Stainless Steel, Metric 页
SAE MA 2154/1-1991(R2001) Clamp, Rectangular, 2 Piece, Cushioned, with Wedges, Hydrocarbon Fluid Resistant, Metric 页
SAE MA 2154/2-1991(R2001) Clamp, Rectangular, 2 Piece, Cushioned, with Wedges, Phosphate Ester Fluid Resistant, Metric 页
SAE MA 2154/3-1991(R2001) Clamp, Rectangular, 2 Piece, Cushioned, with Wedges, High Temperature, Metric 页
SAE MA 2155/1-1991(R2001) Clamp, Rectangular Loop, Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Aluminum, Metric 页
SAE MA 2155/2-1991(R2001) Clamp, Rectangular Loop, Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Stainless Steel, Metric 页
SAE MA 2155/3-1991(R2001) Clamp, Rectangular Loop, Cushioned, with Wedge, Phosphate Ester Fluid Resistant, Aluminum, Metric 页
SAE MA 2155/4-1991(R2001) Clamp, Rectangular Loop, Cushioned, with Wedge, Phosphate Ester Fluid Resistant, Stainless Steel, Metric 页
SAE MA 2155/5-1991(R2001) Clamp, Rectangular Loop, Cushioned, with Wedge, High Temperature, Stainless Steel, Metric 页
SAE MA 2156/1-1991(R2001) Clamp, Center Mount, Cushioned, Hydrocarbon Fluid Resistant, Metric 页
SAE MA 2156/2-1991(R2001) Clamp, Center Mount, Cushioned, Phosphate Ester Fluid Resistant, Metric 页
SAE MA 2156/3-1991(R2001) Clamp, Center Mount, Cushioned, High Temperature, Metric 页
SAE MA 2157-1988(R2004) Cross, Bulkhead, Flareless Tube FSC 4730 页
SAE MA 2158-1988(R2001) Cross, Swivel, Flareless Tube 页
SAE MA 2170-1990(R2001) Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 204 Degrees C, 21,000 kPa, Lightweight Beam Seal, Straight to Straight, Metric 页
SAE MA 2171-1990(R2001) Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 204 Degrees C, 21,000 kPa, Lightweight Beam Seal, Straight to 45 Degrees, Metric 页
SAE MA 2172-1990(R2004) Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 204 Degrees C, 21,000 kPa, Lightweight Beam Seal, Straight to 90 Degrees, Metric FSC 4720 页
SAE MA 2176A-1996(R2001) Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa, Beam Seal, Straight to Straight, Metric 页
SAE MA 2177A-1996(R2001) Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa, Beam Seal, Straight to 45 Degree, Metric 页
SAE MA 2178B-2004 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE CRES REINFORCED, 232?, 10 500 KPA, BEAM SEAL, STRAIGHT TO 90? METRIC FSC 4720 页
SAE MA 2241-1993(R2004) Coupling Assembly, Threadless, Flexible, Fixed Cavity, Self-Bonding, Metric 页
SAE MA 2242-1993(R2004) Assembled Coupling, Threadless - Flexible, Fixed Cavity, Self-Bonding, Envelope Dimensions, Metric FSC 4730 页
SAE MA 2243-1993(R2004) Ferrule, Swaged, Threadless Coupling, Flexible, Fixed Cavity, Self-Bonding, Metric FSC 4730 页
SAE MA 2244-1993(R2004) Ferrule End, Threadless Coupling, Flexible, Fixed Cavity, Self-Bonding, Design Standard, Metric FSC 4730 页
SAE MA 2245-1993(R2004) Ferrule, Butt Weld, Threadless Coupling, Flexible, Fixed Cavity, Self-Bonding, Metric FSC 4730 页
SAE MA 2246-1993(R2004) Sleeve End, Threadless Coupling, Flexible, Fixed Cavity, Self-Bonding, Design Standard, Metric FSC 4730 页
SAE MA 2250-1992(R2004) Coupling Fuel, Flexible Variable Cavity, Threaded Type with Ferrules, Metric 页
SAE MA 2251A-1994(R2004) Coupling, Flexible, Variable Cavity, Threaded Ferrule Type Tube Ends, Envelope Dimensions, Design Standard, Metric FSC 4730 页
SAE MA 2256A-1994(R2004) Ferrule, Coupling, Flexible, Variable Cavity, Threaded, Ferrule Tube End, Metric FSC 4730 页
SAE MA 2262-1993(R2004) Ferrule, Sleeve, Butt Weld, Threadless Coupling, Flexible, Fixed Cavity, Self- Bolding, Metric FSC 4730 页
SAE MA 2263-1993(R2004) Ferrule, Sleeve, Swaged, Threadless Coupling, Flexible, Fixed Cavity, Self-Bonding, Metric FSC 4730 页
SAE MA 2271-1995(R2001) Fitting End, Beam Seal, Slip-On Nut, Design Standard, Metric FSC 4730 页
SAE MA 2273-1995(R2001) Fitting End, Beam Seal, External Thread, Design Standard, Metric FSC 4730 页
SAE MA 2274-1995(R2001) Fitting End, Beam Seal, Bulkhead, External Thread, Design Standard, Metric FSC 4730 页
SAE MA 2276-1995(R2001) Nut, Beam Seal, Slip-On Metric FSC 4730 页
SAE MA 2284-1996(R2001) Fitting, Tee, Beam Seal, Metric FSC 4730 页
SAE MA 2289-1996(R2001) Fitting, Elbow, 45 Degree, Beam Seal, Metric FSC 4730 页
SAE MA 2292-1996(R2001) Fitting, Elbow, 45 Degree, Bulkhead Beam Seal, Metric FSC 4730 页
SAE MA 2294-1996(R2001) Fitting, Elbow, 90 Degree, Beam Seal, Metric FSC 4730 页
SAE MA 2298-1996(R2001) Fitting, Elbow, 90 Degree, Bulkhead Beam Seal, Metric FSC 4730 页
SAE MA 2300-1996(R2001) Fitting, Adapter, External Thread Beam Seal to Integral Weld Ring, Metric FSC 4730 页
SAE MA 2301-1996(R2001) Fitting, Adapter, Slip on Nut Beam Seal to Weld, Metric FSC 4730 页
SAE MA 2303-1996(R2001) Fitting, Union, Beam Seal, Metric FSC 4730 页
SAE MA 2304-1996(R2001) Fitting, Union, Reducer, Beam Seal, Metric FSC 4730 页
SAE MA 2305-1996(R2001) Fitting, Union, Bulkhead, Beam Seal, Metric FSC 4730 页
SAE MA 2306-1996(R2001) Fitting, Adapter, Bulkhead, External Thread Beam Seal to Integral Weld Ring, Metric FSC 4730 页
SAE MA 2307A-1997(R2001) Fitting End, Integral Centered Weld Lip, Design Standard, Metric FSC 4730 页
SAE MA 2515-1986(R2001) Ring - Back-Up, Port Connection, AMS 3660, Metric FSC 5330 页
SAE MA 2520-1986(R2001) Nut - Hex, Back-Up Ring Port Fitting Connector, AMS 5639, MJ Thread, Metric FSC 5310 页
SAE MA 2521-1986(R2001) Nut, Plain, Hexagon, Port Fitting Connector, AMS 5639, MJ Thread, Metric FSC 5310 页
SAE MA 2532-1987(R2001) Adapter - Port to Tube, 60 Deg Cone Coupling, AMS 5639, MJ Thread, Metric FSC 4730 页
SAE MA 2536-1991(R2001) Gasket, Metal C-Ring, Face Seal, Internal Pressure, UNS N07750 Silver Plated, Metric FSC 5330; UNS N07750 页
SAE MA 2537-1990(R2006) Groove Design, Metal C-Ring Gasket, Face Type Internal Pressure, Metric FSC 5330 页
SAE MA 2538-1992(R2004) Gasket, Metal C-Ring Seal Nickel Alloy, Corrosion and Heat Resistant, Metric Procurement Specification For FSC 5330 页
SAE MA 3259A-2004 (R) PIN, COTTER - CRES, UNS S32100, AS7211 METRIC SERIES FSC 5315 页
SAE MA 3265-1996(R2001) Washer - Flat Load Spreading, Metric, AMS 5525 页
SAE MA 3266-1987(R2001) Nut, Self Locking - Spline Drive, Extended Washer UNS S66286, Silver Plate, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3274-1992(R2004) NUT - SELF-LOCKING, CLINCH, SERRATED SHANK, 400?, DRY FILM COATED, UNS S66286, MJ THREAD, METRIC FSC 5310 页
SAE MA 3275-1992(R2004) NUT - SELF-LOCKING, CLINCH, SERRATED SHANK, 650?, SILVER PLATED, UNS S66286, MJ THREAD, METRIC FSC 5310 页
SAE MA 3279B-1995(R2006) Insert, Screw Thread, Helical Coil, Metric Series, Free Running, CRES, Uncoated 页
SAE MA 3280B-1995(R2006) Insert, Screw Thread, Helical Coil, Metric Series, Free Running, CRES, Dry Film Lubricated 页
SAE MA 3281B-1995(R2006) INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, FREE RUNNING, CRES, CADMIUM PLATED 页
SAE MA 3286B-2004 (R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, MJ THREAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 900 MPA MIN, METRIC FSC 5306 页
SAE MA 3287-1987(R2006) Bolt, Machine-Spline Extended Washer, PD Shank Long Thread, AMS5731, Metric FSC 5306 页
SAE MA 3288-1985(R2001) Nut, Plain Hex - UNS S66286, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3294-1990(R2001) Clip - Spring, Tension, Outer 5.5 mm Bolt Hole, AMS 5525, Metric FSC 5340 页
SAE MA 3295-1990(R2001) Clip - Spring, Tension, Inner 5.5 mm Bolt Hole, AMS 5525, Metric FSC 5340 页
SAE MA 3296-1990(R2001) Cushion - Tube Clamp Support, PTFE, Metric FSC 5340 页
SAE MA 3329C-1995(R2001) Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Uncoated 页
SAE MA 3330C-1995(R2001) Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Dry Film Lubricated 页
SAE MA 3331C-1995(R2001) Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Cadmium Plated 页
SAE MA 3338-1987(R2004) BOLT, MACHINE-HEX HEAD, PD SHANK, LONG THREAD, AMS 5662, METRIC FSC 5306 页
SAE MA 3340B-1991(R2001) Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, AMS 5662, Metric FSC 5306 页
SAE MA 3340B-1991(R2006) Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, AMS 5662, Metric FSC 5306 页
SAE MA 3341-1987(R2001) Bolt, Machine-Spline Extended Washer, Full Shank, Long Thread, AMS 5731 Metric FSC 5306 页
SAE MA 3341-1987(R2006) Bolt, Machine-Spline Extended Washer, Full Shank, Long Thread, AMS 5731 Metric FSC 5306 页
SAE MA 3342-1987(R2006) Bolt, Machine-Spline Extended Washer, Full Shank, Drilled, Long Thread, AMS5731, Metric FSC 5306 页
SAE MA 3343-1987(R2006) Bolt, Machine - Spline Drive Extended Washer, Full Shank, Long Thread, AMS 5662, Metric FSC 5306 页
SAE MA 3344-1985(R2006) Nut, Plain Hex - Thin, UNS S66286, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3347-1987(R2006) Bolt, Machine-Hex Head-Full Shank, Long Thread, AMS 5731 Metric FSC 5306 页
SAE MA 3348-1991(R2006) Bolt, Spline Drive Extended Washer Head, PD Shank, Long Thread, AMS 5708, Metric FSC 5306 页
SAE MA 3349-1987(R2003) Nut, Self Locking - Reduced Hex Drive, UNS S66286, Silver Plate, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3350-1985(R2006) Nut, Castellated, Hex - UNS S66286, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3351-1987(R2004) NUT, SPLINE DRIVE - EXTENDED WASHER, CUPWASHER LOCK, UNS S66286, SILVER PLATE, MJ THREAD, METRIC FSC 5310;"BEST COPY AVAILABLE" 页
SAE MA 3352-1987(R2001) Packing, Preformed - O-Ring Seal, AMS 7276, Metric FSC 5330 页
SAE MA 3352-1987(R2006) Packing, Preformed - O-Ring Seal, AMS 7276, Metric FSC 5330 页
SAE MA 3365-1987(R2006) Bolt, Machine - Hex Head, Drilled, Full Shank, Long Thread, AMS 5731, Metric FSC 5306 页
SAE MA 3366-1987(R2006) Bolt, Machine-Spline Drive, Extended Washer Drilled Head, Full Shank, Long Thread, AMS 5662, Metric FSC 5306 页
SAE MA 3368-1987(R2006) Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, Drilled, AMS5662 Metric FSC 5306 页
SAE MA 3369-1987(R2006) Bolt, Machine-Hex Head, Drilled, PD Shank, Long Thread, AMS 5662, Metric FSC 5306 页
SAE MA 3371-1991(R2006) Bolt, Spline Drive Extended Washer Head, Drilled, PD Shank, Long Thread, AMS 5708, Metric FSC 5306 页
SAE MA 3374A-1995(R2006) Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric UNS S66286; FSC 5306 页
SAE MA 3375B-1995(R2006) Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric FSC 5307 页
SAE MA 3376B-1997(R2006) Bolts& Screws, UNS G87400 Tensile Strength 860 MPa& 1000 MPa Procurement Specification, Metric UNS G87400; FSC 5306 页
SAE MA 3377A-1995(R2006) Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric UNS N07718; FSC 5306 页
SAE MA 3378C-1997(R2006) Bolts and Screws, UNS N07001 Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled Before Aging, Procurement Specification, Metric UNS N07001; FSC 5306 页
SAE MA 3379-1988(R2004) STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 6 X 1 FSC 5307 页
SAE MA 3380-1988(R2004) STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 7 X 1 FSC 5307 页
SAE MA 3381-1988(R2006) Stud, Straight - 2.5 Dia Engagement, A286, MJ Metric 8 x 1 - 8 x 1 FSC 5307 页
SAE MA 3382-1988(R2004) STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 - 10 X 1.25 FSC 5307 页
SAE MA 3383-1988(R2004) STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 5 X 0.8 FSC 5307 页
SAE MA 3384-1988(R2004) STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 6 X 1 FSC 5307 页
SAE MA 3385-1988(R2004) STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 - 7 X 1 FSC 5307 页
SAE MA 3386-1988(R2004) STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 - 8 X 1 FSC 5307 页
SAE MA 3387-1988(R2004) STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 12 X 1.25 - 10 X 1.25 FSC 5307 页
SAE MA 3388-1988(R2004) STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 5 X 0.8 FSC 5307 页
SAE MA 3389-1988(R2004) STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 6 X 1 FSC 5307 页
SAE MA 3390-1988(R2004) STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 - 7 X 1 FSC 5307 页
SAE MA 3391-1988(R2004) STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 - 8 X 1 FSC 5307 页
SAE MA 3392-1988(R2004) STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 12 X 1.25 - 10 X 1.25 FSC 5307 页
SAE MA 3393-1990(R2006) Clip - Spring, Tension, Outer 6.7 MM Bolt Hole, AMS 5525, Metric FSC 5340 页
SAE MA 3394-1990(R2006) Clip - Spring, Tension, Inner 6.7 mm Bolt Hole, AMS 5525, Metric FSC 5340 页
SAE MA 3398-1987(R2006) Bolt, Machine-Hex Head-Drilled, PD Shank, Long Thread, AMS 5731, Metric FSC 5306; AM 5731 页
SAE MA 3399-1990(R2006) Clamp - Tube Support, Spring Clips and PTFE Cushion Procurement Specification for FSC 5340 页
SAE MA 3422-1985(R2006) Nut, Plain Hex - UNS S66286, Silver Plate, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3423-1985(R2006) Nut, Plain Hex - Drld, UNS S66286, Silver Plate, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3424-1985(R2006) Nut, Plain Hex - Thin, UNS S66286, Silver Plate, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3426-1985(R2006) Nut, Castellated, Hex - UNS S66286, Silver Plate, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3428-1985(R2006) Nut, Castellated, Hex - Thin, UNS S66286, Silver Plate, MJ Thread, Metric FSC 5310; UNS S66286 页
SAE MA 3429-1987(R2006) Nut, Self Locking, Spline Drive, Extended Washer, UNS N07001, Silver Plate, MJ Thread, Metric FSC 5310; UNS N07001 页
SAE MA 3433-1989(R2006) Nut, Self Locking - Shank UNS N07001, Silver Plate, MJ Thread, Metric FSC 5310; UNS N07001 页
SAE MA 3434-1987(R2006) Packing, Preformed - O-Ring Seal, AMS 7273, Metric FSC 5330 页
SAE MA 3437-1987(R2006) Spacer, Sleeve - for 5mm Bolt, AMS4901 or AMS4921, Metric FSC 5365; 页
SAE MA 3438-1987(R2006) Spacer, Sleeve - for 6mm Bolt, AMS4901 or AMS4921, Metric FSC 5365 页
SAE MA 3441-1989(R2006) Washer-Key, Cup Lock, AMS 5510, Metric FSC 5310 页
SAE MA 3442-1987(R2001) Packing, Preformed - O-Ring Seal, AMS 7267, Metric FSC 5330 页
SAE MA 3442-1987(R2006) Packing, Preformed - O-Ring Seal, AMS 7267, Metric FSC 5330 页
SAE MA 3444-1990(R2006) Nut, Self Locking - Spline Drive, Captive Washer, UNS S66286, Silver Plate, MJ Thread, Metric FSC 5310 页
SAE MA 3445-1988(R2004) PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC FSC 5330 页
SAE MA 3446A-1994(R2001) Bolt, Machine - Tee Head, Chamfered Classification: 1210 MPa /730 Degrees C Close Tol Shank, UNS N07001, Metric FSC 5306 页
SAE MA 3446A-1994(R2006) BOLT, MACHINE - TEE HEAD, CHAMFERED CLASSIFICATION: 1210 MPA/730 ? CLOSE TOL SHANK, UNS N07001, METRIC FSC 5306 页
SAE MA 3447-1990(R2001) Bolt, Machine - Spline Drive HD, Close Tol Full Shank, AMS-5662, Metric FSC 5306 页
SAE MA 3447-1990(R2006) Bolt, Machine - Spline Drive HD, Close Tol Full Shank, AMS-5662, Metric FSC 5306 页
SAE MA 3448-1991(R2001) Bolt, Spline Drive Special Extended Washer Head, Reduced Head, PD Shank, AMS 5708, Metric FSC 5306 页
SAE MA 3448-1991(R2006) Bolt, Spline Drive Special Extended Washer Head, Reduced Head, PD Shank, AMS 5708, Metric FSC 5306 页
SAE MA 3449-1991(R2001) Bolt, Spline Drive Extended Washer Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric FSC 5306 页
SAE MA 3449-1991(R2006) Bolt, Spline Drive Extended Washer Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric FSC 5306 页
SAE MA 3450-1991(R2006) Retainer, Nut and Bolt, Cup Lock 5 mm and 6 mm, AMS 5510, Metric FSC 5340 页
SAE MA 3453-1990(R2006) Washer, Flat, AMS-5525, Metric FSC 5310 页
SAE MA 3454-1991(R2006) Cover - Engine Accessory Drive, Square, 127.28 BC, Metric FSC 2995 页
SAE MA 3471-1991(R2006) Gasket - Engine Accessory Drive Square, 127.28 BC, Metric FSC 2995 页
SAE MA 3476-1991(R2001) Bolt, Machine - Spline Extended Washer, Full Head, PD Shank, Long Thread, AMS 5662 - Metric FSC 5306 页
SAE MA 3512-1993(R2004) BOLT, MACHINE - SPLINE DRIVE HD, CLOSE TOL FULL SHANK, UNS N07001, METRIC FSC 5306;"BEST COPY AVAILABLE" 页
SAE MA 3513-1993(R2004) BOLT, MACHINE - SPLINE DRIVE EXTENDED, WASHER HEAD, PD SHANK, LONG THREAD, UNS N07001, METRIC FSC 5306 页
SAE MA 3520-1994(R2006) Insert - Thin Wall, Short Self-Locking, 550 Degrees C, Silver Plated UNS N07718, MJ Thread, Metric FSC 5340; UNS N07718 页
SAE MA 3521-1994(R2006) Insert - Thin Wall, Long Self-Locking, 550 Degrees C, Silver Plated UNS N07718, MJ Thread, Metric FSC 5340; UNS N07718 页
SAE MA 3574-1996(R2006) Rivet-Solid, Universal Head, AS7232 Corrosion and Heat Resistant Nickel Alloy, Metric FSC 5320 页
SAE MA 4016-1987(R2001) Ring, Retaining - External, Spiral Wound, Heavy& Medium Duty CRES, Metric FSC 5365 页
SAE MA 4017-1987(R2001) Ring, Retaining - Internal, Spiral Wound, Heavy& Medium Duty CRES, Metric FSC 5365 页
SAE MA 4018-1987(R2006) Pin, Straight, Headless AMS 5688, Metric FSC 5315 页
SAE MA 4019-1987(R2006) Pin, Straight, Headless AMS 5732, Metric FSC 5315 页
SAE MA 4020-1987(R2006) Ring, Retaining - External, Tapered, Type I, Class 2 AMS 5520, Metric FSC 5365 页
SAE MA 4021-1987(R2006) Ring, Retaining - Internal, Tapered, Type I, Class 1 AMS 5520, Metric FSC 5365 页
SAE MA 4029-1987(R2006) Ring, Retaining - Internal, Beveled, Tapered, Type II Class 1 AMS 5520, Metric FSC 5365 页
SAE MA 4030-1987(R2006) Ring, Retaining - External, Reinforced E-Ring, Type I Class 3 AMS 5520, Metric FSC 5365 页
SAE MA 4035-1988(R2004) Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specification For, Metric 页
SAE MA 4036-1988(R2004) Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric FSC 5365 页
SAE MA 4037A-1995(R2006) Washer, Key - 90 Degree Locking, Cres, UNS S32100, Metric UNS S32100; FSC 5310 页
SAE MA 4038B-2002 Washer, Key - 180 Degree Locking, Cres, UNS S32100, Metric UNS S32100; FSC 5310 页
SAE MA 4039A-1995(R2006) Washer, Key - 270 Degree Locking, Cres, UNS S32100, Metric UNS S32100; FSC 5310 页
SAE MA 4040A-1995(R2006) Washer, Key - Dual Locking Positions, Cres, UNS S32100, Metric UNS S32100; FSC 5310 页
SAE MA 4044-1990(R2006) Nut, Spanner - End Slots, Cupwasher Locked, UNS S66286, Silver Plated, MJ Thread, Metric FSC 5310 页
SAE MA 4045-1989(R2001) Washer, Cup, Lock - Spanner Nut AMS 5646, Metric FSC 5310 页
SAE MA 4070-1988(R2004) Pins, Procurement Specification for, Metric FSC 5315 页
SAE MA 4095-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced 135 Degrees C, 34,500 kPa, Hydraulic and Pneumatic 页
SAE MA 4098-1995(R2001) Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 204 Degrees C, 35 000 kPa Hydraulic and Pneumatic, Metric 页
SAE MA 4147-1992(R2004) BOLT, SPLINE DRIVE, EXTENDED WASHER, REDUCED SHANK, AMS 5662, METRIC FSC 5306; UNS N07718 页
SAE MA 4177-1990(R2006) Nut, Self Locking - Hex Extended Washer UNS N07001, Silver Plate, MJ THD, Metric FSC 5310 页
SAE MA 4187-1992(R2004) BOLT, MACHINE, SPLINE DRIVE, SPECIAL EXTENDED WASHER, REDUCED HEAD, PD SHANK, AMS 5662, METRIC FSC 5305; UNS N07718 页
SAE MA 4189-1992(R2004) Screw, Machine, 100 Degree CSK, Flat Head, Offset Cruciform Recess, Full Shank, UNS S66286, MJ Thread, Metric FSC 5306 页
SAE MA 4248-1989(R2004) Cap Assembly, Protective Closure, Beam Seal Fitting, Low Pressure, Metric FSC 4730 页
SAE MA 4284-1993(R2004) Areas for Calculating Stress or Load Values for Metric MJ Internally Threaded Fasteners 页
SAE MA 4360-1993(R2004) Metric Wrenches: Nondistorting Flare Nut 页
SAE MA 4368-1990(R2006) Nut, Plain, Round - Spanner Wrenching, Shaft Mounted, UNS S66286, Procurement Specification for, Metric UNS S66286; FSC 5310 页
SAE MA 4510/1-1996(R2001) Fittings, Weld to 24 Degree Cone Flareless, Fluid Connection, Metric 页
SAE MA 4510-1996(R2001) Fittings, Weld, Fluid Connection, 35,000 kPa, Metric 页
SAE MA 4534-1993(R2004) Socket Wrenches, Hand (Metric) 页
SAE MA 4535-1995(R2004) Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric 页
SAE MA 4568-1994(R2004) HOSE ASSEMBLY, PTFE, ARAMID REINFORCED STANDARD DUTY, 21 000/28 000 kPa, 135 DEGREES C, TITANIUM FITTINGS, FLARELESS, INCLUDING JUMP SIZES, STRAIGHT TO STRAIGHT, METRIC FSC 4720 页
SAE MA 4569-1994(R2004) Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 21 000/28 000 kPa, 135 Degrees C, Titanium Fittings, Flareless, Including Jump Sizes, Straight to 45 Degrees, Metric FSC 4720 页
SAE MA 4570-1994(R2001) Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 21 000/ 28 000 kPa, 135 Degrees C, Titanium Fittings, Flareless, Including Jump Sizes, Straight to 90 Degree, Metric 页
SAE MA 4571-1994(R2004) Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 21 000/28 000 kPa, 135 Degrees C, Titanium Fittings, Flareless, 45 Degrees to 90 Degrees, Metric FSC 4720 页
SAE MA 4572-1994(R2004) Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 21 000/28 000 kPa, 135 Degrees C, Titanium Fittings, Flareless, 45 Degrees to 45 Degrees, Metric FSC 4720 页
SAE MA 4573-1994(R2004) Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 21 000/28 000 kPa, 135 Degrees C, Titanium Fittings, Flareless, 90 Degrees to 90 Degrees, Metric FSC 4720 页
SAE MA 4623-1994(R2004) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 Degrees C, Aircraft Hydraulic Systems, Metric 页
SAE MA 4624-1994(R2004) Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, Straight to Straight, Metric FSC 4720 页
SAE MA 4625-1994(R2004) Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, Straight to 45 Degrees, Metric FSC 4720 页
SAE MA 4626-1994(R2004) Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, Straight to 90 Degrees, Metric FSC 4720 页
SAE MA 4627-1994(R2004) Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, 45 Degrees to 45 Degrees, Metric FSC 4720 页
SAE MA 4628-1994(R2004) Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, 45 Degrees to 90 Degrees, Metric FSC 4720 页
SAE MA 4629-1994(R2004) Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, 90 Degrees to 90 Degres, Metric FSC 4720 页
SAE MA 4811-1994(R2006) Insert - Thin Wall, Self-Locking, Metric Short and Long Length Installation and Removal of 页
SAE MA 4812-1994(R2001) Insert - Thin Wall, Metric Short and Long Hole Preparation for FSC 5340 页
SAE MA 4872-1998 Paint Stripping of Commercial Aircraft - Evaluation of Materials and Process 页
SAE MA 5066-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 kPa, 135 Degrees C, Beam Seal, Straight to Straight, Metric 页
SAE MA 5067-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 kPa, 135 Degrees C, Beam Seal, Straight to 45 Degree, Metric 页
SAE MA 5068-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 kPa, 135 Degrees C, Beam Seal, Straight to 90 Degree, Metric 页
SAE MA 5069-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 kPa, 135 Degrees C, Beam Seal, 45 Degree to 45 Degree, Metric 页
SAE MA 5070-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 kPa, 135 Degrees C, Beam Seal, 45 Degree to 90 Degree, Metric 页
SAE MA 5071-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 21,000 kPa, 135 Degrees C, Beam Seal, 90 Degree to 90 Degree, Metric 页
SAE MA 5073-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 kPa, 135 Degrees C, Beam Seal, Straight to Straight, Metric 页
SAE MA 5074-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 kPa, 135 Degrees C, Beam Seal, Straight to 45 Degree, Metric 页
SAE MA 5075-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 kPa, 135 Degrees C, Beam Seal, Straight to 90 Degree, Metric 页
SAE MA 5076-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 kPa, 135 Degrees C, Beam Seal, 45 Degree to 45 Degree, Metric 页
SAE MA 5077-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 kPa, 135 Degrees C, Beam Seal, 45 Degree to 90 Degree, Metric 页
SAE MA 5078-1996(R2001) Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, 34,500 kPa, 135 Degrees C, Beam Seal, 90 Degree to 90 Degree, Metric 页
SAE MA 5405/1-2000 Splice, Fiber Optic, Aerospace Inter-Connect,Graded Index 100/140/172 Cable Size 页
SAE MA 5405-2000 Splices, Fiber Optics, for Aerospace Intrt-Connection Systems 页
SAE MA 614A-1998(R2004) (R) Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced, 28,000 kPa, 204 Degrees C, Hydraulic, Metric 页
SAE MA 620 SUP 1-1998(R2004) Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft, Metric (Supplement 1) 页
SAE MA 620-1998(R2004) Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft Metric 页
SAE MA 7211A-1996(R2006) Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification for UNS S32100; FSC 5315; Superseding MAM 7211 页
SAE MAM 2279A-1993(R1998) Tolerances, Metric; Rubber Products 页
SAE MAM 3053-1994 Grease, Water Resistant Polyalphaolefin Base 页
SAE MAP 1201-1994(R2004) Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings, Metric 页
SAE MAP 1572A-2002 Metric Stud Holes For Aerospace Electrical and Electronic Wire Terminating Devices 页
SAE MAP 1670-1982(R2006) Studs, Installation Practice for Interference Fit - Metric 页
SAE MAP 1753A-2001(R2006) Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment 页
SAE MAP 2261-1993(R2001) Fluid Couplings for Spacecraft Servicing, Preparation of Specification for, Metric 页
SAE MAP 3439-1989(R2004) O-Ring Groove Design for Packing Preformed, Elastomeric O-Ring Seals, Static, Axial Compression, Metric FSC 5330 页
SAE MAP 3440-1990(R2006) O-Ring Groove Design for Packing Preformed, Elastomeric O-Ring Seals, Static, Radial Squeeze, Metric 页
SAE MAP 4053-1989(R1994) Uniform Measurement Units for Leakage Rates 页
SAE MAP 4296-1993(R2004) Drawing Interpretations, Standard Machining Practice, Tube Fittings and Connectors, Fluid Systems, Metric 页
SAE MAP 4919-1998(R2004) Fluid Connections, Fittings, Hex Width, Metric 页
SAE MAP 749B-1992 Aircraft Turbine Engine Fuel System Component Endurance Test Procedure (Room Temperature Contaminated Fuel) 页
SAE MS 1000-2004 Lubricants, Industrial Oils, and Related ProductsClassification 页
SAE MS 1001-2002 Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems -- Specification 页
SAE MS 1002-2001 Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification 页
SAE MS 1003-2002 Lubricants, Industrial Oils, and Related Products Type D Compressor OilsSpecification 页
SAE MS 1003-2-2004 Lubricants, Industrial Oils, and Related Products Type D Compressor Oils Specification - Addendum 页
SAE MS 1004-2000 Lubricants, Industrial Oils, and Related Products Type H (Hydrualic Fluids) - Specification 页
SAE MS 1005-2001 Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids - Specification 页
SAE MS 1006-2001 Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches -- Specification 页
SAE MS 1007-2001 Lubricants, Industrial Oils, and Related Products Type G Slideway Lubricants - Specification 页
SAE MS 1008-2002 Lubricants, Industrial Oils and Related Products Type M (Metal Removal Fluids) Specification 页
SAE MS 1009-2002 Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils -- Specification 页
SAE MS 1010-2002 Lubricants, Industrial Oils, and Related Products Type T Turbine Oils -- Specification 页
SAE MS 1011-2002 Lubricants, Industrial Oils and Related Products - Type X (Greases) - Specification 页
SAE TSB 002-1992 (R) Preparation of SAE Technical Reports June 1992; Superseding J 1159 页
SAE TSB 003-1999 Rules for SAE Use of SI (Metric) Units 页
SAE TSB 004-1998 Technical Committee Guidelines 页
SAE Z26.1-1996 Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard 页

SAE航天材料规格-SAE Aerospace Materials Specifications（AMS）目录

        SAE AMS 3273E-1991(R2005) 耐风化的尼龙织物增强的氯丁二烯橡胶薄板 页
SAE AMS 3274G-1991(R2005) 耐燃料的尼龙织物增强的丁腈橡胶薄板和模制型材 页
SAE AMS 3275B-1999 耐燃料及油的非石棉纤维和丁腈橡胶的薄板 8 页
SAE AMS 3276D-2003 间歇使用至360°F(182°C)的整体燃料罐和一般用途的密封化合物 23 页
SAE AMS 3277C-2004 间歇使用至400°F(204°C)的整体燃料罐和一般用途的聚硫醚橡胶快速固化的密封化合物 20 页
SAE AMS 3278-2004 用于整体燃料箱/燃料腔/一般用途的耐燃料高抗拉强度/高拉伸的聚亚胺酯密封和涂层化合物 13 页
SAE AMS 3279B-2005 间歇使用至350°F (171°C)整体燃料箱和燃料电池腔用可喷射的密封化合物 页
SAE AMS 3281C-2003 间歇使用至360°F (182°C)整体燃料罐和燃料电池腔用低密度(1.20-1.35 sp gr)聚硫化物合成橡胶密封化合物 18 页
SAE AMS 3283A-1998 耐温和耐燃料的沟槽注入非固化的聚硫化物密封化合物 21 页
SAE AMS 3284A-2005 用于可移动仪表板和燃料箱检查刻度盘的低粘附强度密封剂 页
SAE AMS 3285E-1993(R2006) 白色100%羊毛毡的背面检查 页
SAE AMS 3286E-1993(R2006) 白色100%羊毛毡的厚实衬垫 页
SAE AMS 3301G-1990(R2001) 硬度40一般用途的硅酮橡胶 9 页
SAE AMS 3302G-1990(R2001) 硬度50一般用途的硅酮橡胶 9 页
SAE AMS 3303J-1990(R2001) 硬度60一般用途的硅酮橡胶 8 页
SAE AMS 3304G-1990(R2001) 硬度70一般用途的硅酮橡胶 8 页
SAE AMS 3305H-1990(R2001) 硬度80一般用途的硅酮橡胶 8 页
SAE AMS 3306B-1998 高模量55-65，1200psi(8.27MPa)的硅酮橡胶 8 页
SAE AMS 3307C-1991(R2003) 65-75不耐油的低压缩形变的硅酮橡胶 6 页
SAE AMS 3310-1997(R2001) 白色、硬度65-75、高强度、低烟密度阻燃的硅酮橡胶 8 页
SAE AMS 3315F-1991(R2005) 玻璃纤维织物增强的硅酮橡胶薄板 页
SAE AMS 3316-2001 玻璃纤维织物增强的硅酮橡胶 7 页
SAE AMS 3320G-1992(R2001) 60-80耐热和耐风化的玻璃纤维织物增强的硅酮橡胶薄板 8 页
SAE AMS 3323-1990(R2001) 海绵状闭孔氟硅氧烷橡胶 8 页
SAE AMS 3325D-1994(R2001) 55-65耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3327C-1994(R2001) 70-80耐高温燃料和油的氟硅氧烷橡胶 7 页
SAE AMS 3328A-1994(R2001) 35-45耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3329A-1994(R2001) 45-55高强度耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3330A-1994(R2001) 45-55耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3331A-1994(R2001) 65-75耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3332D-1990(R2001) 15-30耐超低温的硅酮橡胶 9 页
SAE AMS 3333-1998 250°F (121°C)以下使用的飞机挡风玻璃和天蓬的聚硫化物密封剂 17 页
SAE AMS 3334D-1990(R2001) 35-45耐超低温的硅酮橡胶 9 页
SAE AMS 3336D-1994(R2001) 55-65耐超低温的硅酮橡胶 8 页
SAE AMS 3337D-1991(R1998) 65-75耐超低温的硅酮橡胶 9 页
SAE AMS 3338F-1991(R1998) 75-85耐超低温的硅酮橡胶 8 页
SAE AMS 3345E-1992(R2001) 45 - 55，抗拉强度1000psi(6.90 MPa)的硅酮橡胶 7 页
SAE AMS 3346F-1996(R2001) 硬度55-65，最小抗拉强度1000psi(6.89 MPa)的硅酮橡胶 7 页
SAE AMS 3347B-1991(R2003) 高模量45-55，1200psi(8.27MPa)的硅酮橡胶 7 页
SAE AMS 3348C-1994(R2000) 高弹性25-35，抗拉强度1150psi(7.93MPa)的硅酮橡胶 8 页
SAE AMS 3349C-1993(R1998) 高弹性65-75，抗拉强度1100psi(7.58MPa)的硅酮橡胶 8 页
SAE AMS 3352B-2000 玻璃纤维织物增强的硅酮橡胶 8 页
SAE AMS 3356E-1991(R2003) 电气等级55-65耐润滑油和压缩形变的硅酮橡胶 8 页
SAE AMS 3357G-1991(R2003) 65-75耐润滑油和压缩形变的硅酮橡胶 7 页
SAE AMS 3358B-1995(R2001) 一般用途的粘度为80-180泊(8-18Pa-s)两部分硅酮橡胶封装化合物 8 页
SAE AMS 3359B-1995(R2001) 一般用途的粘度为200-400泊(20-40Pa-s)两部分硅酮橡胶封装化合物 8 页
SAE AMS 3361B-1995(R2001) 一般用途的粘度为150-400泊(15-40Pa-s)两部分硅酮橡胶封装化合物 8 页
SAE AMS 3362C-1990(R2001) 硬度35-55，粘度为15000厘泊的室温硫化的硅酮橡胶化合物 7 页
SAE AMS 3363D-1990(R2001) 硬度30-45，粘度为50000厘泊的室温硫化的硅酮橡胶化合物 7 页
SAE AMS 3364C-1990(R2001) 硬度35-55，粘度为50000厘泊，短适用期的室温硫化的硅酮橡胶化合物 7 页
SAE AMS 3368A-1988(R2001) 高温固化的透明的硅酮树脂橡胶 7 页
SAE AMS 3370A-1988(R2001) 室温固化的透明的硅酮树脂橡胶 7 页
SAE AMS 3372A-1988(R2001) 高温固化的高拉裂强度的硅酮树脂橡胶 7 页
SAE AMS 3373/1A-1987(R2001) 室温固化的低粘度的耐油和耐硫化还原的绝缘和密封用硅酮橡胶化合物 2 页
SAE AMS 3373/2A-1987(R2001) 室温固化的中粘度的耐油和耐硫化还原的绝缘和密封用硅酮橡胶化合物 2 页
SAE AMS 3373B-1995(R2001) 35-55绝缘和密封用硅酮橡胶化合物 16 页
SAE AMS 3374/1-1996 飞机防火隔板用一部分硅酮密封化合物（1类） 4 页
SAE AMS 3374/2-1996 防火隔板密封剂 两部分添加剂固化的硅酮密封化合物（2类） 4 页
SAE AMS 3374/3-1996 防火隔板密封剂 两部分浓缩固化的密封化合物（3类） 4 页
SAE AMS 3374/4-1996 防火隔板密封剂 两部分聚硫化物的密封化合物（4类） 4 页
SAE AMS 3374C-2005 飞机防火隔板用密封化合物 页
SAE AMS 3375B-2001 一部分室温硫化的耐芳香烃燃料的氟硅氧烷胶粘剂/密封剂 页
SAE AMS 3376A-1992 耐温和耐燃料的沟槽注入非固化的密封化合物 19 页
SAE AMS 3377-1993(R2000) 防腐蚀可电导的密封化合物 19 页
SAE AMS 3378A-2005 耐非燃料、室温硫化的通用两件式硅酮密封剂 页
SAE AMS 3380D-1991(R1995) 金属丝编织增强的聚四氟乙烯碳氟树脂软管 24 页
SAE AMS 3382C-1999 70-80和85-95耐液压用液体和合成油的四氟乙烯/丙烯橡胶 10 页
SAE AMS 3383-1995(R2001) 75-85耐高温燃料和油的聚四氟乙烯-氟硅氧烷橡胶 7 页
SAE AMS 3386D-1993(R1999) 可折叠的织物增强的包覆氯丁二烯的丁腈橡胶飞机加油软管 7 页
SAE AMS 3387E-1993(R1999) 不可折叠的织物增强的包覆氯丁二烯的丁腈橡胶飞机加油软管 7 页
SAE AMS 3388D-1993(R1999) 不可折叠的金属丝编织增强的包覆氯丁二烯的丁腈橡胶飞机加油软管 7 页
SAE AMS 3389D-1993(R1999) 不可折叠的双金属丝编织增强的包覆氯丁二烯的丁腈橡胶飞机加油软管 7 页
SAE AMS 3410J-1998(R2006) 银钎焊的焊剂 页
SAE AMS 3411D-1998(R2006) 高温银钎焊的焊剂 页
SAE AMS 3412E-2003 焊炬或熔炉钎焊用的铝钎焊焊剂 6 页
SAE AMS 3414D-2002 铝焊接的焊剂 7 页
SAE AMS 3415C-2000 1030°F (554°C)或较低温度液态的铝沉浸钎焊的焊剂 6 页
SAE AMS 3415D-2006 Flux, Aluminum Dip Brazing 1030 Degrees F (554 Degrees C) or Lower Liquidus 页
SAE AMS 3417B-2002 高温钎焊的焊剂 5 页
SAE AMS 3420F-2001(R2006) 硅胶脱水剂 页
SAE AMS 3430C-2001(R2006) 水稀释的铜焊膏 页
SAE AMS 3529A-1993(R1998) 未增塑的乙烯基共聚物塑料薄板和薄膜 10 页
SAE AMS 3564E-1993(R2000) 硬化纤维板 9 页
SAE AMS 3568/1A-1993(R2006) Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density 页
SAE AMS 3568/2A-1993(R2006) Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic Foot (240 kg/m3) Density 页
SAE AMS 3568/3A-1993(R2006) Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 20 Pounds/Cubic Foot (320 kg/m3) Density 页
SAE AMS 3568A-1991(R2001) 缓冲用泡沫状聚醚氨基甲酸乙酯橡胶薄板 13 页
SAE AMS 3570E-1993(R2001) 中等挠性开孔的聚亚氨酯泡沫材料 8 页
SAE AMS 3571/1B-1991(R2001) “A”型硬度45未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/2B-1991(R2001) “A”型硬度55未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/3B-1991(R2001) “A”型硬度65未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/4B-1991(R2001) “A”型硬度75未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/5B-1991(R2001) “A”型硬度85未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/6B-1991(R2001) “A”型硬度95未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/7B-1991(R2001) “D”型硬度55未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/8B-1991(R2001) “D”型硬度65未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/9B-1991(R2001) “D”型硬度75未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571B-1991(R2001) 未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 6 页
SAE AMS 3573B-1994(R2003) 80-90耐低温实心的挠性聚醚型聚亚氨酯树脂铸件 7 页
SAE AMS 3579D-1996(R2003) 收缩率为1.6-1的热收缩挠性不交联的电绝缘聚氯乙烯塑料管 11 页
SAE AMS 3582A-1979(R2003) 收缩率为2-1的热收缩挠性交联的电绝缘聚氯乙烯塑料管 9 页
SAE AMS 3587D-1993 收缩率为2-1的热收缩（低回复温度）极高挠性的着色的辐照处理的电绝缘聚烯烃塑料管 10 页
SAE AMS 3588D-1993 收缩率为2-1的热收缩极高挠性的透明的辐照处理的电绝缘聚烯烃塑料管 10 页
SAE AMS 3593A-1991(R2003) 低量漏气的标志套管级热收缩半刚性辐照处理的电绝缘聚偏二氟乙烯塑料管 10 页
SAE AMS 3599A-1991(R2004) 可燃性受控的覆铜箔玻璃纤维织物增强的环氧树脂塑料薄板 16 页
SAE AMS 3601D-1992(R2004) 保持热强度的覆铜箔玻璃纤维织物增强的环氧树脂塑料薄板 17 页
SAE AMS 3603A-2002 飞机外部用的高性能聚合的压合胶粘剂保护薄膜 21 页
SAE AMS 3605F-1993(R1998) 棉织物增强的酚甲醛成形塑料薄板 12 页
SAE AMS 3607F-1993(R1998) 棉织物增强的酚甲醛塑料薄板 10 页
SAE AMS 3609D-1998 耐热的甲基丙烯酸甲酯塑料薄板 12 页
SAE AMS 3611D-1994(R2003) 一般用途的聚碳酸酯塑料薄板 7 页
SAE AMS 3612B-1993(R1998) 一般用途的电气级聚酯薄膜 9 页
SAE AMS 3613C-1998 覆铜箔的聚酯薄膜 8 页
SAE AMS 3614B-1994(R2003) 带涂层的光学级聚碳酸酯薄板和零件 11 页
SAE AMS 3615E-1993(R1998) 棉织物增强的酚甲醛塑料管 10 页
SAE AMS 3617D-1994(R2003) 尼龙塑料模压件和挤压件 7 页
SAE AMS 3619C-1993(R1998) 耐高温315°C (599°F)的层压聚酰亚胺树脂 11 页
SAE AMS 3623D-1993 收缩率为1.750-1的热收缩挠性辐照处理的电绝缘氯丁橡胶管 11 页
SAE AMS 3625B-1989(R1994) 收缩率为1.750-1的热收缩挠性着色的交联的电绝缘硅酮橡胶管 9 页
SAE AMS 3626F-1993(R1998) 甲基丙烯酸甲酯塑料模压件和挤压件 7 页
SAE AMS 3628D-1993(R1998) 一般用途的聚碳酸酯塑料模压件和挤压件 8 页
SAE AMS 3631C-1998 高温挠性聚氯乙烯塑料挤压件 11 页
SAE AMS 3632E-1991(R1995) 收缩率为2-1的热收缩半刚性辐照处理的电绝缘聚偏二氟乙烯塑料管 10 页
SAE AMS 3634D-1993 热收缩半刚性有选择交联的电绝缘聚烯烃塑料管 10 页
SAE AMS 3635D-1993(R1998) 闭孔改性的乙烯基泡沫塑料薄板和带材 9 页
SAE AMS 3636G-1991(R1995) 收缩率为2-1的热收缩挠性着色的辐照处理的电绝缘聚烯烃塑料管 9 页
SAE AMS 3637F-1993 收缩率为2-1的热收缩挠性的透明的辐照处理的电绝缘聚烯烃塑料管 11 页
SAE AMS 3638F-1993 收缩率为2-1的热收缩半刚性的着色的辐照处理的电绝缘聚烯烃塑料管 10 页
SAE AMS 3639F-1993 收缩率为2-1的热收缩半刚性的透明的辐照处理的电绝缘聚烯烃塑料管 10 页
SAE AMS 3642D-1993(R1998) 耐热的玻璃纤维织物增强的层压热固性树脂塑料模压件 8 页
SAE AMS 3643B-1992(R2004) 耐热的填充玻璃纤维粗纱的热固性硅酮塑料模压件 9 页
SAE AMS 3644F-2001 模压的聚酰亚胺的杆材、棒材、管材、板材和成形的零件 8 页
SAE AMS 3645C-1991(R2003) 未增塑的加压模制的聚氯三氟乙烯大型材 页
SAE AMS 3646C-1991(R2003) 未增塑的模压聚氯三氟乙烯薄板 7 页
SAE AMS 3647C-1993(R2006) Polyfluoroethylene Propylene Film and Sheet 页
SAE AMS 3648B-1991(R2003) 未增塑的聚氯三氟乙烯管 8 页
SAE AMS 3649C-1991(R2003) 未增塑的聚氯三氟乙烯薄膜 6 页
SAE AMS 3650C-1991(R2003) 未增塑的聚氯三氟乙烯杆材、薄板和模制型材 7 页
SAE AMS 3652C-1993(R2006) 非临界级的聚四氟乙烯薄膜 页
SAE AMS 3653E-1993(R1999) 挤压的标准壁厚聚四氟乙烯电绝缘管 10 页
SAE AMS 3654C-1993(R1999) 挤压的薄壁聚四氟乙烯电绝缘管 10 页
SAE AMS 3655B-1993(R1999) 挤压的薄壁聚四氟乙烯电绝缘管 10 页
SAE AMS 3656E-1993(R1998) 烧结的标准强度聚四氟乙烯挤压件 13 页
SAE AMS 3657C-1993(R1998) 烧结的高强度聚四氟乙烯挤压件 12 页
SAE AMS 3658C-1993(R1998) 经射线检查的已烧结和消除应力的高强度聚四氟乙烯挤压件 12 页
SAE AMS 3659C-1993(R1998) 已烧结和消除应力的高强度聚四氟乙烯挤压件 12 页
SAE AMS 3660C-1994(R2003) 烧结的一般用途的聚四氟乙烯模压件 8 页
SAE AMS 3661C-1993(R2006) 优质聚四氟乙烯薄膜 页
SAE AMS 3662C-1991(R2006) Polytetrafluoroethylene Film General Purpose Grade 页
SAE AMS 3664B-1988(R1994) 涂覆乙烯基共聚物树脂的玻璃纤维织物 7 页
SAE AMS 3666D-1993(R1998) 玻璃纤维织物增强的聚四氟乙烯薄板 12 页
SAE AMS 3667C-1993(R1998) 一般用途的烧结的模压聚四氟乙烯薄板 8 页
SAE AMS 3668C-1994(R2003) 优质烧结的聚四氟乙烯模压件 8 页
SAE AMS 3669D-1993(R1998) 优质烧结的模压聚四氟乙烯薄板 8 页
SAE AMS 3670/1B-1995(R2004) 未充填的聚酰胺-酰亚胺棒材、杆材和型材 3 页
SAE AMS 3670/2B-1992(R2006) Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled 页
SAE AMS 3670/3B-1995(R2004) 充填12%石墨-3%聚四氟乙烯的聚酰胺-酰亚胺棒材、杆材和型材 3 页
SAE AMS 3670/4C-1995(R2000) 30%玻璃纤维聚酰胺-酰亚胺棒材、杆材和型材 3 页
SAE AMS 3670/5C-1995(R2000) 30%碳纤维聚酰胺-酰亚胺棒材、杆材和型材 3 页
SAE AMS 3670B-1995(R2003) 模压或挤压的聚酰胺-酰亚胺棒材、杆材和型材 6 页
SAE AMS 3673B-1997 硅橡胶衬底铝作表面的玻璃纤维织物 12 页
SAE AMS 3677-1992(R2005) 注入聚四氟乙烯烧结的聚苯并咪唑聚酰胺玻璃纤维织物 页
SAE AMS 3678/10-2004(R2006) Type 10 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 15% Carbon Fiber 页
SAE AMS 3678/1A-2004(R2006) Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions 页
SAE AMS 3678/2-1999(R2006) Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions 页
SAE AMS 3678/3-1999(R2006) Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions 页
SAE AMS 3678/4-1999(R2006) Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions 页
SAE AMS 3678/5-1999(R2006) Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment 页
SAE AMS 3678/6-1999(R2006) Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions 页
SAE AMS 3678/7-2004(R2006) Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite 页
SAE AMS 3678/8-2004(R2006) Type 8 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 10% Carbon Fiber 页
SAE AMS 3678/9A-2006 Type 9 Virgin Polytetrafluoroethylene (PTFE) Moldings with Pigment for AS4716 and AS5857 Backup Rings 页
SAE AMS 3678B-2006 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components 页
SAE AMS 3679B-1993(R2006) 陶瓷纤维的隔热性 页
SAE AMS 3680C-1993(R2006) 二氧化硅纤维的隔热性 页
SAE AMS 3681C-1995(R2005) 充填银的导电环氧树脂粘合剂 页
SAE AMS 3683A-1993(R2001) 收缩率为2-1的热收缩耐火的挠性辐照处理的改性的含氟聚合物电绝缘塑料管 10 页
SAE AMS 3686A-1991(R2005) 耐高温315°C (599°F)聚酰亚胺树脂胶粘浆糊和薄膜 页
SAE AMS 3688B-1988(R2005) -55°C- +82°C (-65°F- +180°F)蜂窝状结构中心连接用泡沫胶粘剂 页
SAE AMS 3689B-1988(R2005) -54°C- +177°C (-65°F- +350°F)蜂窝状结构中心连接用泡沫胶粘剂 页
SAE AMS 3690B-1993(R2000) 室温固化的环氧胶粘剂化合物 7 页
SAE AMS 3692C-1995(R2005) 高温用环氧树脂胶粘剂化合物 页
SAE AMS 3695/1-1983(R2001) 适用于95°C (200°F)的高耐久性环氧基胶粘薄膜 9 页
SAE AMS 3695/2-1983(R2001) 适用于120°C (250°F)的高耐久性环氧基胶粘薄膜 9 页
SAE AMS 3695/3-1983(R2001) 适用于175°C (350°F)的高耐久性环氧基胶粘薄膜 9 页
SAE AMS 3695/4-1983(R2001) 适用于215°C (420°F)的高耐久性环氧基胶粘薄膜 9 页
SAE AMS 3695-1983(R2001) 高耐久性胶粘结构粘接用环氧基胶粘薄膜 13 页
SAE AMS 3704A-1993(R1998) 改进的接触型氯丁橡胶树脂胶粘剂 8 页
SAE AMS 3705A-1993(R1998) 脂环族液态环氧树脂 6 页
SAE AMS 3710C-1993(R1998) 耐热低压模制的玻璃纤维织物树脂的夹层结构 10 页
SAE AMS 3711E-2001 涂覆酚醛的芳族聚酰胺基纤维蜂窝状芯材 12 页
SAE AMS 3712C-2001 玻璃纤维/聚酰亚胺的蜂窝状芯材 10 页
SAE AMS 3713D-1996(R2003) 涂覆酚醛的聚酰胺纸基的挠性蜂窝状芯材 10 页
SAE AMS 3714D-1995(R2003) 涂覆酚醛的聚酰胺纸基的超膨胀蜂窝状芯材 9 页
SAE AMS 3715D-2004 玻璃纤维/酚醛蜂窝状芯材 12 页
SAE AMS 3716C-1998 斜纹纤维结构的玻璃纤维/酚醛蜂窝状芯材 11 页
SAE AMS 3718B-1998(R2006) Webbing, Woven Nylon For Decelerators 页
SAE AMS 3722A-1988(R1994) 125 lb (55 kg)蜂窝状纸 7 页
SAE AMS 3726/2A-1991(R2001) 充填树脂化合物的预催化薄板的垫片 3 页
SAE AMS 3726/3A-1991(R2001) 充填液态预催化树脂化合物的垫片 4 页
SAE AMS 3726C-1998(R2006) 充填树脂化合物的垫片 页
SAE AMS 3728A-1994 低分子量的甲酚酚醛环氧树脂 6 页
SAE AMS 3729A-1994(R2005) 未充填耐中温的热固性环氧树脂基体 页
SAE AMS 3751B-1990(R2003) 空心的微小玻璃球 7 页
SAE AMS 3753A-1992(R1998) 空心的微小碳球 8 页
SAE AMS 3755/1A-1992(R2003) 稠化率为95的无定形的二氧化硅粉末 2 页
SAE AMS 3755/2A-1992(R2003) 稠化率为95的无定形的二氧化硅粉末 2 页
SAE AMS 3755B-2001 无定形的二氧化硅粉末 6 页
SAE AMS 3756A-1989(R1994) 25玻璃纤维75聚四氟乙烯树脂烧结的已充填玻璃纤维的聚四氟乙烯模压件 8 页
SAE AMS 3778/1A-1990(R1994) 350磅(1557N)强度的机织尼龙带 3 页
SAE AMS 3778/2A-1990(R1994) 290磅(1290N)强度的机织尼龙带 3 页
SAE AMS 3778/3A-1990(R1994) 400磅(1779N)强度的尼龙机织带状织物 3 页
SAE AMS 3778/4A-1990(R1994) 2600磅(11565N)强度的尼龙机织带状织物 3 页
SAE AMS 3778/5A-1990(R1994) 900磅(4003N)强度的尼龙机织带状织物 3 页
SAE AMS 3778A-1990(R1994) 尼龙机织带和带状织物 13 页
SAE AMS 3779/1A-1990(R1994) 铝箔/玻璃纤维织物耐热辐射的压合胶粘带 2 页
SAE AMS 3779/2A-1990(R1994) 玻璃纤维织物涂覆铝的耐热辐射的压合胶粘带 2 页
SAE AMS 3779A-1990(R1994) 耐热辐射的压合胶粘带 7 页
SAE AMS 3782/1A-1990(R1994) 0.25盎司/码(9.6g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782/2A-1990(R1994) 0.30盎司/码(12g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782/3A-1990(R1994) 0.35盎司/码(14g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782/4A-1990(R1994) 0.50盎司/码(20g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782/5A-1990(R1994) 0.70盎司/码(28g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782A-1990(R1994) 中模量对芳族聚酰胺的管状织带 22 页
SAE AMS 3787/1A-1991(R2001) 断裂强度为10,000码/磅(20,159 m/kg),16磅(71 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/2A-1991(R2001) 断裂强度为6700码/磅(13507 m/kg),25磅(111 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/3A-1991(R2001) 断裂强度为5000码/磅(10080 m/kg),35磅(156 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/4A-1991(R2001) 断裂强度为3350码/磅(6753 m/kg),50磅(222 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/5A-1991(R2001) 断裂强度为2000码/磅(4032 m/kg),80磅(356 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/6A-1991(R2001) 断裂强度为950码/磅(1915 m/kg),150磅(667 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/7A-1991(R2001) 断裂强度为850码/磅(1714 m/kg),175磅(778 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/8A-1991(R2001) 断裂强度为500码/磅(1008m/kg),225磅(1001 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787A-1991(R2001) 中模量对芳族聚酰胺线 10 页
SAE AMS 3791A-1990(R1994) 薄尼龙织物 11 页
SAE AMS 3792/1A-1989(R1994) 断裂强度为2(51),300(1334)的低模量芳族聚酰胺带 3 页
SAE AMS 3792/2A-1989(R1994) 断裂强度为2(51),1000(4448)的低模量芳族聚酰胺带 3 页
SAE AMS 3792/3A-1989(R1994) 断裂强度为2(51),3000(13345)的低模量芳族聚酰胺带 3 页
SAE AMS 3792B-1994 断裂强度为300(1334)，1000(4448)和8000(13,345)的低模量芳族聚酰胺带 14 页
SAE AMS 3793/10-1996 5/16英寸(7.9mm), 0.053盎司/码(1.64g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/11-1996 3/8英寸(9.5mm), 0.035盎司/码(1.09g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/12-1996 5/8英寸(15.9mm), 0.25盎司/码(7.75g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/1A-1996 1/2英寸(12.5mm), 0.06-0.56盎司/码(1.9-17.4 g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/2A-1996 9/16英寸(14mm), 0.08-0.13盎司/码(2.5-4.0g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/3A-1996 3/4英寸(19mm), 0.11-0.60盎司/码(3.4-18.6g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/4A-1996 1英寸(25mm), 0.08-1.65盎司/码(2.5-51.2g/m)中模量对芳族聚酰胺织带和带状织物 3 页
SAE AMS 3793/5A-1996 1-1/8英寸(28mm), 0.23-2.00盎司/码(7.1-62.0g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/6A-1996 1-1/4英寸(31mm), 0.23盎司/码(7.1g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/7A-1996 1-1/2英寸(37.5mm), 0.12-0.47盎司/码(3.7-14.6g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/8A-1996 1-3/4英寸(44mm), 0.17-2.50盎司/码(5.3-77.5g/m)中模量对芳族聚酰胺织带和带状织物 4 页
SAE AMS 3793/9A-1996 2.00英寸(50mm), 0.12-1.10盎司/码(3.7-34.1g/m)中模量对芳族聚酰胺织带和带状织物 3 页
SAE AMS 3793A-1996 中模量对芳族聚酰胺织带和带状织物 21 页
SAE AMS 3797/10B-1994 断裂强度为10000 (44482)，宽度为1-1/8(29)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/11B-1994 断裂强度为11000 (48930)，宽度为1-1/8(29)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/12B-1994 断裂强度为12000 (53379)，宽度为1-1/8(29)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/1B-1994 断裂强度为1000 (4448)，宽度为5/8 (15.9)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/2B-1994 断裂强度为2000 (8896)，宽度为5/8 (15.9)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/3B-1994 断裂强度为3000 (13345)，宽度为1(25)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/4B-1994 断裂强度为4000 (17793)，宽度为1(25)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/5B-1994 断裂强度为5000 (22241)，宽度为1(25)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/6B-1994 断裂强度为6000 (26689)，宽度为1-1/16(27)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/7B-1994 断裂强度为7000 (31138)，宽度为1-1/16(27)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/8B-1994 断裂强度为8000 (35586)，宽度为1-1/16(27)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/9B-1994 断裂强度为9000 (40034)，宽度为1-1/8(29)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797B-1994 整体锁缝的尼龙带状织物 15 页
SAE AMS 3798/10B-1993(R1998) 宽度为1(25), 断裂强度为6000 (26689)低模量芳族聚酰胺人字形斜纹带状织物 5 页
SAE AMS 3798/11B-1993(R1998) 宽度为1-3/4(44), 断裂强度为10000 (44482)低模量芳族聚酰胺人字形斜纹带状织物 5 页
SAE AMS 3798/12B-1993(R1998) 宽度为1(25), 断裂强度为9000 (40034)低模量芳族聚酰胺特殊编织带状织物 4 页
SAE AMS 3798/13B-1993(R1999) 树脂浸渍的，宽度为1-23/32(44), 断裂强度为7300 (32472)低模量芳族聚酰胺斜纹带状织物 5 页
SAE AMS 3798/14B-1993(R1998) 宽度为1-1/4(32), 断裂强度为800 (3559)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/15B-1993(R1998) 宽度为1(25), 断裂强度为2500 (11121)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/16B-1992(R1997) 宽度为1-1/2(38), 断裂强度为1700 (7562)低模量芳族聚酰胺特殊编织带状织物 4 页
SAE AMS 3798/1B-1993(R1999) 树脂浸渍的，宽度为9/16(14), 断裂强度为500 (2224)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/2B-1993(R1999) 宽度为1(25), 断裂强度为600 (2669)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/3B-1993(R1998) 宽度为3/4(19), 断裂强度为600 (2669)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/4B-1993(R1998) 宽度为1-23/32(44), 断裂强度为5500 (24465)低模量芳族聚酰胺带有胶粘剂的双平织带状织物 4 页
SAE AMS 3798/5B-1993(R1999) 树脂浸渍的，宽度为1-23/32(44), 断裂强度为3600 (16014)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/6B-1993(R1998) 宽度为3-1/32(77), 断裂强度为9000 (40034)低模量芳族聚酰胺带有胶粘剂的双平织带状织物 4 页
SAE AMS 3798/7B-1993(R1998) 宽度为1-23/32(44), 断裂强度为8700 (38700)低模量芳族聚酰胺带有胶粘剂的双平织带状织物 4 页
SAE AMS 3798/8B-1993(R1998) 宽度为1-23/32(44), 断裂强度为1200 (5338)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/9B-1993(R1999) 树脂浸渍的，宽度为1-23/32(44), 断裂强度为6500 (28913)低模量芳族聚酰胺人字形斜纹带状织物 5 页
SAE AMS 3798B-1993(R1998) 低模量芳族聚酰胺带状织物 16 页
SAE AMS 3799/1B-1993(R2006) Webbing, Tubular, Low Modulus Aramid 9/16 (14) Wide, 1400 (6228) Breaking Strength 页
SAE AMS 3799/2B-1993(R2006) Webbing, Tubular, Low Modulus Aramid 3/4 (19) Wide, 2300 (10,231) Breaking Strength 页
SAE AMS 3799/3B-1993(R2006) Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17,793) Breaking Strength 页
SAE AMS 3799/4B-1993(R2006) Webbing, Tubular, Low Modulus Aramid 3-3/16 (81) Wide, 2250 (10,008) Breaking Strength 页
SAE AMS 3799B-1993(R2006) Webbing, Tubular, Low-Modulus Aramid-54 页
SAE AMS 3801/1A-1990(R2001) 重量为4.7(159)低模量间芳族聚酰胺的降落伞斜纹织物 4 页
SAE AMS 3801/2A-1990(R2001) 重量为6.5(220)低模量间芳族聚酰胺的降落伞特殊编织织物 5 页
SAE AMS 3801/3A-1990(R2001) 重量为12.0(407)低模量间芳族聚酰胺的降落伞特殊编织织物 5 页
SAE AMS 3801/4A-1990(R2001) 重量为7.0(237)低模量间芳族聚酰胺的降落伞平纹织物 4 页
SAE AMS 3801/5A-1990(R2001) 树脂浸渍的，重量为18.0(610)低模量间芳族聚酰胺的降落伞方平组织织物 3 页
SAE AMS 3801A-1990(R2004) 低模量间芳族聚酰胺的降落伞织物 10 页
SAE AMS 3803A-1992(R1997) 松散编织的棉擦布 6 页
SAE AMS 3805A-1992(R1997) 芳族聚酰胺非熔化的粗布织物 9 页
SAE AMS 3806E-1993(R2006) 断裂强度为80磅(356 N)的飞机用丝光棉布织物 页
SAE AMS 3807B-1999(R2006) 声音和振动衰减的压敏铝箔胶粘带 页
SAE AMS 3808A-1994 压敏屏蔽的胶粘带 9 页
SAE AMS 3809-1981(R1994) 系紧地毯的压敏双面胶粘带 4 页
SAE AMS 3811B-1993(R1998) 拉挤涂覆的聚酯树脂、芳族聚酰胺纤维棒材 11 页
SAE AMS 3812B-1993(R1998) 拉挤涂覆的聚酯树脂、玻璃纤维棒材 11 页
SAE AMS 3813/1A-1987(R1998) 芳族聚酰胺纤维绳 缆绳加夹套的 挤压夹套 4 页
SAE AMS 3813/2A-1987(R1998) 芳族聚酰胺纤维绳 平行绳股加夹套的 挤压夹套 4 页
SAE AMS 3813/3A-1987(R1998) 芳族聚酰胺纤维绳 平行纱线加夹套的 编织夹套 4 页
SAE AMS 3813A-1988(R1998) 天线用加夹套的芳族聚酰胺纤维绳 支撑系统 9 页
SAE AMS 3817D-1993(R1998) 电工捆扎用涂覆树脂的平编织尼龙带 8 页
SAE AMS 3819B-2001 飞机一、二级结构表面用清洗织物 15 页
SAE AMS 3820A-1995 环缝降落伞用尼龙织带 14 页
SAE AMS 3824C-1995(R2003) 树脂层压用精制的玻璃纤维织物 13 页
SAE AMS 3826B-1995 浸渍“B”级聚酯树脂的1581和7781式样“E”型玻璃纤维织物 10 页
SAE AMS 3827B-1991(R1995) 耐火的浸渍“B”级聚酯树脂的7781式样“E”型玻璃纤维织物 13 页
SAE AMS 3828C-1993(R1998) 预浸渍环氧树脂的“E”型玻璃纤维粗纱 7 页
SAE AMS 3829B-1993(R1998) 溶液添加剂型PMR-15浸渍聚酰亚胺树脂的7781式样“E”型玻璃纤维织物 10 页
SAE AMS 3831A-1992(R1997) 增加强度的耐火的浸渍“B”级环氧树脂的7781式样“E”型玻璃纤维织物 10 页
SAE AMS 3832C-1994 浸渍环氧树脂的“S-2”型玻璃纤维粗纱 9 页
SAE AMS 3834A-1998 增加强度的耐火的浸渍“B”级聚酯树脂的7781式样“E”型玻璃纤维织物 10 页
SAE AMS 3837D-1994 No.HTS-904精制的181式样“S”型玻璃纤维织物 9 页
SAE AMS 3844B-1994 热熔添加剂型浸渍聚酰亚胺树脂的7781式样“E”型玻璃纤维织物 12 页
SAE AMS 3845B-1991(R1997) 浸渍聚酰亚胺树脂“B”级添加剂固化的“E”型玻璃纤维织物 12 页
SAE AMS 3846C-1995 树脂层压用精制的石英织物 14 页
SAE AMS 3846D-2006 Cloth, Quartz Finished for Resin Laminates 页
SAE AMS 3847C-1994 315°C（599°F），浸渍“B”级聚酰亚胺树脂的581式样石英织物 13 页
SAE AMS 3849B-1994 热熔添加剂型浸渍聚酰亚胺树脂的581式样石英织物 13 页
SAE AMS 3865C-1991(R2005) 以钨为基底的连续硼纤维 页
SAE AMS 3867/1B-1991(R2001) B4.0-E374型(B0.102-E191型)浸渍环氧树脂的硼纤维带材 4 页
SAE AMS 3867/2B-1991(R2001) B5.6-E374型(B0.142-E190型)浸渍环氧树脂的硼纤维带材 5 页
SAE AMS 3867/3B-1991(R2001) B8.0-E374型(B0.203-E190型)浸渍环氧树脂的硼纤维带材 5 页
SAE AMS 3867/4A-1991(R2001) B4.0-E180型(B0.102-E82型)浸渍环氧树脂的硼纤维带材 5 页
SAE AMS 3867/5A-1991(R2001) B5.6-E180型(B0.142-E82型)浸渍环氧树脂的硼纤维带材 4 页
SAE AMS 3867/6A-1991(R2001) B8.0-E180型(B0.203-E82型)浸渍环氧树脂的硼纤维带材 5 页
SAE AMS 3867B-1991(R2001) 浸渍环氧树脂的硼纤维带材 18 页
SAE AMS 3890A-1996(R2005) 非结构的5股线、720细丝的石墨纱线 页
SAE AMS 3892/10A-1992(R2005) 抗拉强度为550(3792), 抗拉模量为38(262)的结构复合材料用碳纤维丝条 页
SAE AMS 3892/11A-1992(R2005) 抗拉强度为450(3103), 抗拉模量为32(221)的结构复合材料用碳纤维丝条 页
SAE AMS 3892/12-1992(R2005) 抗拉强度为730(5033), 抗拉模量为41(283)的结构复合材料用碳纤维丝条 页
SAE AMS 3892/1B-1992(R2005) 抗拉强度为GF400(2758), 抗拉模量为33(228)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/2B-1992(R2005) 抗拉强度为GF300(2068), 抗拉模量为50(345)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/3B-1992(R2005) 抗拉强度为GF400(2758), 抗拉模量为40(276)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/4B-1992(R2005) 抗拉强度为GF300(2068), 抗拉模量为75(517)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/5B-1992(R2005) 抗拉强度为GF220(1517), 抗拉模量为75(517)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/6A-1992(R2005) 抗拉强度为GF325(2241), 抗拉模量为57(393)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/7A-1992(R2005) 抗拉强度为GF（OX）400(2758), 抗拉模量为33(228)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/8A-1992(R2005) 抗拉强度为GF（OX）400(2758), 抗拉模量为40(276)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/9B-1992(R2005) 抗拉强度为GF500(3447), 抗拉模量为32(221)的结构复合材料用碳纤维丝条 页
SAE AMS 3892B-1992(R2005) 结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3894/10A-1989(R2005) 抗拉强度为G210,000(1448),抗拉模量为20,000,000(138), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/11A-1989(R2005) 抗拉强度为G200,000(1379),抗拉模量为18,000,000(124), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/12A-1989(R2005) 抗拉强度为G200,000(1379),抗拉模量为18,000,000(124), 温度为120°C(248°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/13A-1989(R2005) 抗拉强度为G131,000(903),抗拉模量为25,000,000(172), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/14A-1989(R2005) 抗拉强度为G90,000(621),抗拉模量为40,000,000(276), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/15A-1989(R2005) 抗拉强度为G200,000(1379),抗拉模量为21,000,000(145), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/16A-1989(R2005) 抗拉强度为G200,000(1379),抗拉模量为21,000,000(145), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/17A-1994(R2005) 抗拉强度为G200(1379),抗拉模量为18.0(124), 温度为120°C(248°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/18-1990(R2005) 抗拉强度为G355,000 (2448),抗拉模量为22,000,000(152), 温度为130°C(266°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/1B-1989(R2005) 抗拉强度为G110,000(758), 抗拉模量为27,000,000(186), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/2B-1989(R2005) 抗拉强度为G150,000(1034),抗拉模量为20,000,000(138), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/3B-1989(R2005) 抗拉强度为G150,000(1034),抗拉模量为19,000,000(131), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/5B-1989(R2005) 抗拉强度为G110,000(758),抗拉模量为27,000,000(186), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/7B-1989(R2005) 抗拉强度为G90,000(621),抗拉模量为40,000,000(276), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/8B-1989(R2005) 抗拉强度为G70,000(483),抗拉模量为36,000,000(248), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/9B-1989(R2005) 抗拉强度为G70,000(483),抗拉模量为36,000,000(248), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894E-1990(R2005) 浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3895B-1994 多股相同纤维、浸渍环氧树脂的碳纤维带和牛皮纸 14 页
SAE AMS 3897/1-1988(R2005) 浸渍环氧树脂的8HS型碳纤维织物 页
SAE AMS 3897-1988(R2005) 浸渍树脂的碳纤维织物 页
SAE AMS 3898/1B-1994(R2005) 0.004英寸(0.10 mm)未打孔的羊皮纸复合带的夹层搬运材料 页
SAE AMS 3898/2B-1994(R2005) 0.0018英寸(0.046 mm)未打孔的聚乙烯薄膜复合带的夹层搬运材料 页
SAE AMS 3898/3B-1994(R2005) 0.0035英寸(0.089 mm)未打孔的聚乙烯涂覆纸复合带的夹层搬运材料 页
SAE AMS 3898/4B-1994(R2005) 0.004英寸(0.10 mm)打孔的纸复合带的夹层搬运材料 页
SAE AMS 3898/5B-1994(R2005) 0.0035英寸(0.089 mm)打孔的聚乙烯涂覆纸复合带的夹层搬运材料 页
SAE AMS 3898/6A-1994(R2005) 0.0032英寸(0.081mm)未打孔的不均匀涂覆纸复合带的夹层搬运材料 页
SAE AMS 3898/7A-1994(R2005) 0.0042英寸(0.107mm)未打孔的不均匀涂覆纸复合带的夹层搬运材料 2 页
SAE AMS 3898/8A-1994(R2005) 0.0038英寸+/-0.0004 (0.97mm +/-0.010)未打孔的不均匀涂覆纸复合带/牛皮纸的夹层搬运材料 页
SAE AMS 3898/9A-1994(R2005) 0.0050英寸+/-0.0005 (0.127mm +/-0.013)未打孔的不均匀涂覆纸复合带/牛皮纸的夹层搬运材料 页
SAE AMS 3898B-1994(R2005) 0.004英寸(0.10 mm)打孔的复合带或牛皮纸的夹层搬运材料 页
SAE AMS 3899/1B-1993(R1994) 抗拉强度为CPS 172 (1170), 抗拉模量为16 (110), 温度为120°C(248°F)浸渍聚砜树脂的碳纤维带和薄板 3 页
SAE AMS 3899/2B-1993(R1994) 抗拉强度为CPS 140 (965), 抗拉模量为27 (186), 温度为120°C(248°F)浸渍聚砜树脂的碳纤维带和薄板 4 页
SAE AMS 3899B-1993(R1998) 浸渍聚砜树脂的碳纤维带和薄板 14 页
SAE AMS 3901/10B-1998 1.2%精制的1140但尼尔(1270d tex),抗拉强度为OY 390 (2689)/23.9,抗拉模量为16.5(114)/945 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/11B-1998 1.2%精制的1420但尼尔(1580d tex),抗拉强度为OY 390 (2689)/23.8,抗拉模量为16.5(114)/950 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/12B-1998 1.2%精制的2160但尼尔(2400d tex),抗拉强度为OY 390 (2689)/21.1,抗拉模量为16.5(114)/900 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/13A-1998 0.6%精制的2450但尼尔(2720d tex),抗拉强度为OY 390 (2689)/23.0,抗拉模量为16.5(114)/875 高模量有机纤维（对芳族聚酰胺）的纱线 3 页
SAE AMS 3901/14A-1998 0.6%精制的2840但尼尔(3160d tex),抗拉强度为OY 390 (2689)/22.3,抗拉模量为16.5(114)/855 高模量有机纤维（对芳族聚酰胺）的纱线 3 页
SAE AMS 3901/15A-1998 0.6%精制的7350但尼尔(8200d tex),抗拉强度为OR 400 (2758)/22.7,抗拉模量为16.5 (114)/935 高模量有机纤维（对芳族聚酰胺）的粗纱 3 页
SAE AMS 3901/16A-1998 0.6%精制的8520但尼尔(9500d tex),抗拉强度为OR 400 (2758)/22.7,抗拉模量为16.5 (114)/935 高模量有机纤维（对芳族聚酰胺）的粗纱 3 页
SAE AMS 3901/17A-1998 1.2%精制的720但尼尔(800d tex),抗拉强度为OY 390 (2689)/23.5,抗拉模量为16.5(114)/950 高模量有机纤维（对芳族聚酰胺）的纱线 3 页
SAE AMS 3901/1C-1998 0.6%精制的195但尼尔(215d tex),抗拉强度为OY 390(2689)/22.5,抗拉模量为18(124)/1010 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/2C-1998 0.6%精制的380但尼尔(420d tex),抗拉强度为OY 390(2689)/23.8,抗拉模量为17.5(121)/950 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/3C-1998 0.6%精制的1140但尼尔(1270d tex),抗拉强度为OY 390(2689)/23.9,抗拉模量为16.5(114)/900高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/4C-1998 0.6%精制的1420但尼尔(1580d tex),抗拉强度为OY 390(2689)/23.8,抗拉模量为16.5(114)/955高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/5C-1998 0.6%精制的7100但尼尔(7900d tex),抗拉强度为OR 450 (3103)/22.5,抗拉模量为17.5 (121)/865 高模量有机纤维（对芳族聚酰胺）的粗纱 4 页
SAE AMS 3901/6C-1998 0.6%精制的4560但尼尔(5070d tex),抗拉强度为OR 500 (3447)/23.5,抗拉模量为17.5 (121)/890 高模量有机纤维（对芳族聚酰胺）的粗纱 4 页
SAE AMS 3901/7C-1998 0.6%精制的2160但尼尔(2400d tex),抗拉强度为OY 390 (2689)/20.9,抗拉模量为16.5 (114)/895 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/8B-1998 1.2%精制的195但尼尔(215d tex),抗拉强度为OY 390 (2689)/22.6,抗拉模量为18(124)/1005 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/9B-1998 1.2%精制的380但尼尔(420d tex),抗拉强度为OY 390 (2689)/23.9,抗拉模量为17.5(121)/970 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901C-1998 高模量有机纤维（对芳族聚酰胺）的纱线和粗纱 13 页
SAE AMS 3902E-2000 结构复合材料用高模量有机纤维（对芳族聚酰胺）织物 13 页
SAE AMS 3903/1A-1988(R2005) 温度为175°C(350°F) OC式样120浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/2A-1988(R2005) 温度为175°C(350°F) OC式样181浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/3A-1988(R2005) 温度为175°C(350°F) OC式样281浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/4A-1988(R2005) 温度为175°C(350°F) OC式样328浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/5A-1988(R2005) 温度为80°C(180°F) OC式样120浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/6A-1988(R2005) 温度为80°C(180°F) OC式样181浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/7A-1988(R2005) 温度为80°C(180°F) OC式样281浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/8A-1988(R2005) 温度为80°C(180°F) OC式样328浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903A-1985(R2005) 浸渍环氧树脂的高模量有机纤维（对芳族聚酰胺）织物 页
SAE AMS 3904/10A-1999 7.0%精制的15000但尼尔(16700 Dtex)中模量有机纤维（对芳族聚酰胺）粗纱 3 页
SAE AMS 3904/11A-1999 0.9%精制的15000但尼尔(16700 Dtex)中模量有机纤维（对芳族聚酰胺）粗纱 3 页
SAE AMS 3904/12A-1999 0.9%精制的4500但尼尔(5000 Dtex)中模量有机纤维（对芳族聚酰胺）粗纱 3 页
SAE AMS 3904/1B-1999 1.0%精制的200但尼尔(220 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/2B-1999 1.0%精制的400但尼尔(440 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/3B-1999 1.0%精制的1000但尼尔(1110 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/5B-1999 0.09%精制的1500但尼尔(1670 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/6A-1999 7.0%精制的1500但尼尔(1670 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/7A-1999 0％精制的1500但尼尔(1670 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/9A-1999 0.9%精制的3000但尼尔(3300 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904B-1999 缆索、绳索和机织商品用中模量有机纤维（对芳族聚酰胺）纱线和粗纱 9 页
SAE AMS 3906/1B-1992(R1997) GL-I-36-120(248)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/2B-1992(R1997) GL-III-36-120(248)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/3B-1992(R1997) GL-I-26-150(302)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/4B-1992(R1997) GL-III-26-150(302)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/5B-1992(R1997) GL-I-36-150(302)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/6B-1992(R1997) GL-I-36-95(203)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/7B-1992(R1997) GL-III-33-95(203)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906B-1992(R1997) 手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 12 页
SAE AMS 3907/1-1985(R2005) 5oz/平方码(170g/平方米)方平组织的芳族聚酰胺织物 页
SAE AMS 3907/2-1985(R2005) 4.3oz/平方码(145g/平方米)平织的芳族聚酰胺织物 页
SAE AMS 3907A-1994(R2005) 方平组织和平织的芳族聚酰胺织物 页
SAE AMS 3908A-1992(R2005) 热稳定的平织芳族聚酰胺织物 页
SAE AMS 3909/1A-1995(R2001) 3.0盎司/平方码(102g/平方米),350磅/英寸(61,294 N/m)芳族聚酰胺织物 3 页
SAE AMS 3909/2A-1995(R2001) 2.25盎司/平方码(76.3g/平方米),250磅/英寸(43782N/m)芳族聚酰胺织物 3 页
SAE AMS 3909/3A-1995(R2001) 2.0盎司/平方码(68g/平方米),230磅/英寸(40279N/m)（经向）和220磅/英寸(38528N/m)（纬向）芳族聚酰胺织物 3 页
SAE AMS 3909A-1995(R2001) 中模量芳族聚酰胺织物 11 页
SAE AMS 3912A-1985(R2005) 聚酰亚胺/石英织物泡沫夹层结构的雷达天线罩 页
SAE AMS 3913B-1994(R2005) 添加剂型聚酰亚胺热熔性泡沫夹层结构的雷达天线罩 页
SAE AMS 3920A-1996(R2005) 胶粘金属面夹层结构件的验收准则 页
SAE AMS 3940H-1993(R1999) 硬压的结构纤维板 8 页
SAE AMS 3970/1-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第1部分 一般要求 40 页
SAE AMS 3970/2-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第2部分 纤维、织物、树脂和胶膜的鉴定程序 17 页
SAE AMS 3970/3-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第3部分 环氧预浸渍制品的采购规范 11 页
SAE AMS 3970/4-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第4部分 胶膜胶粘剂的采购规范 9 页
SAE AMS 3970-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第0部分 简介 5 页
SAE AMS 4001H-2002 退火的含0.12Cu(1100-0)的铝薄板和板材 5 页
SAE AMS 4003G-1995 含0.12Cu(1100-H14)加工硬化的铝合金薄板和板材 6 页
SAE AMS 4004C-1995 含2.5Mg-0.25Cr(5052-H191)加工硬化的铝合金箔 6 页
SAE AMS 4006J-2005 Aluminum Alloy, Sheet and Plate 1.25Mn - 0.12Cu (3003-0) Annealed UNS A93003 页
SAE AMS 4008J-2001 含1.25Mn-0.12Cu(3003-H14)加工硬化的铝合金薄板和板材 5 页
SAE AMS 4011C-2003 退火的含99.45Al(1145-0)的铝箔和薄板 10 页
SAE AMS 4013E-2005 Aluminum Sheet, Laminated Surface Bonded 页
SAE AMS 4015K-2000 退火的含2.5Mg-0.25Cr(5052-0)的铝合金薄板和板材 5 页
SAE AMS 4016K-2000 1/4硬回火稳定的含2.5Mg-0.25Cr(5052-H32)加工硬化的铝合金薄板和板材 6 页
SAE AMS 4017K-2004 1/2硬回火稳定的含2.5Mg-0.25Cr(5052-H34)加工硬化的铝合金薄板和板材 5 页
SAE AMS 4025K-2005 退火含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-0)的铝合金薄板和板材 6 页
SAE AMS 4026L-2005 固溶热处理的和自然老化的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T4薄板,-T451板材)的铝合金薄板和板材 页
SAE AMS 4027M-2002 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr-(6061-T6薄板,-T651板材)的铝合金薄板和板材 6 页
SAE AMS 4028F-1991(R1995) 退火的含4.4Cu-0.85Si-0.80Mn-0.50Mg(2014-0)的铝合金薄板和板材 7 页
SAE AMS 4029K-2006 Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated UNS A92014 页
SAE AMS 4031F-2000 退火的6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-0)铝合金薄板和板材 6 页
SAE AMS 4035K-2003 退火的4.4Cu-1.5Mg-0.60Mn(2024-0)铝合金薄板和板材 7 页
SAE AMS 4036J-2000 铝合金薄板和板材（含4.4Cu-1.5Mg-0.60Mn单面镀铝的、2024单面镀铝的和1-1/2%单面镀铝的2024-T3薄板、1-1/2%单面镀铝的2024-T351板材） 8 页
SAE AMS 4037N-2003 固溶热处理的含4.4Cu-1.5Mg-0.60Mn(2024;-T3平薄板,-T351板材)的铝合金薄板和板材 6 页
SAE AMS 4040M-2001(R2006) 退火的含4.4Cu-1.5Mg-0.60Mn(2024镀铝的和1-1/2％镀铝的2024-0)的铝合金镀铝薄板和板材 页
SAE AMS 4041P-2000 含4.4Cu-1.5Mg-0.60Mn(2024镀铝的和1-1/2％镀铝的2024，-T3平薄板；1-1/2%镀铝的2024-T351板材)的铝合金镀铝薄板和板材 7 页
SAE AMS 4044J-2002 退火的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-0)的铝合金薄板和板材 7 页
SAE AMS 4044K-2006 Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-0) or when specified, As Fabricated (7075-F) UNS A9075 页
SAE AMS 4045H-1993(R2000) 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr 7075:(-T6薄板,-T651板材)的铝合金薄板和板材 7 页
SAE AMS 4046F-2005 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(单面镀铝的7075:-T6薄板,-T651板材)单面镀铝的铝合金薄板和板材 页
SAE AMS 4048L-2006 (R) Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0-23Cr (Alclad 7075-0) Annealed UNS A87075 页
SAE AMS 4049K-2003 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(镀铝的7075:-T6薄板,-T651板材)镀铝的铝合金薄板和板材 7 页
SAE AMS 4050H-2003 固溶热处理的、消除应力的和过老化的含6.2Zn-2.3Cu-2.2Mg-0.12Zr (7050-T7451)铝合金板材 9 页
SAE AMS 4056G-2005 Aluminum Alloy, Sheet and Plate 4.4Mg - 0.70Mn - 0.15Cr (5083-0) Annealed UNS A95083 页
SAE AMS 4062H-1999(R2006) 加工硬化的拉制铝合金无缝圆管(1100-H14) 页
SAE AMS 4063D-2005 Aluminum Alloy, Clad One Side, Sheet 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed UNS A83003 页
SAE AMS 4064E-2001(R2006) 退火的含1.25Mn-0.12Cu(No.12-0钎接金属片)双面镀层的铝合金薄板 页
SAE AMS 4065J-2006 Aluminum Alloy, Drawn Seamless Tubing 1.2Mn - 0.12Cu (3003-0) Annealed UNS A93003 页
SAE AMS 4066C-2003 固溶热处理的、拉伸消除应力的和脱溶热处理的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti-(2219-T8511)拉制铝合金无缝圆管 5 页
SAE AMS 4067H-2000(R2006) 加工硬化的含1.25Mn-0.12Cu(3003-H14)拉制铝合金无缝圆管 页
SAE AMS 4068D-2003 固溶热处理的和拉伸消除应力的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T3511)拉制铝合金无缝管 5 页
SAE AMS 4069D-2001(R2006) 退火的含2.5Mg-0.25Cr(5052-0)拉制高精度铝合金无缝圆管 页
SAE AMS 4070L-2001(R2006) 退火的含2.5Mg-0.25Cr(5052-0)拉制铝合金无缝圆管 页
SAE AMS 4071L-2002 退火的含2.5Mg-0.25Cr(5052-0)拉制铝合金无缝液压圆管 7 页
SAE AMS 4077F-2001 退火的含4.4Cu-1.5Mg-0.60Mn(单面镀层的2024-0)单面镀铝的铝合金薄板和板材 7 页
SAE AMS 4078F-2000 固溶热处理的、消除应力的和过老化的(7050-T7351)铝合金板材 6 页
SAE AMS 4079F-2002 退火的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-O)拉制高精度铝合金无缝圆管 7 页
SAE AMS 4080M-2002 退火的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-O)拉制铝合金无缝管 7 页
SAE AMS 4081H-2000(R2006) 固溶热处理的和时效处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T4)拉制铝合金无缝液压圆管 页
SAE AMS 4082N-2000(R2006) Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated UNS A96061 页
SAE AMS 4083K-2000(R2006) 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T6)拉制铝合金液压无缝圆管 页
SAE AMS 4084D-2005 固溶热和脱溶热处理含5.7Zn-2.2Mg-1.6Cu-0.22Cr(7475-T61)的铝合金薄板 5 页
SAE AMS 4085C-2006 Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged UNS A9747 页
SAE AMS 4086M-1996 固溶热处理的、冷处理的和时效处理的含4.4Cu-1.5Mg-0.60Mn(2024-T3)拉制铝合金无缝液压圆管 8 页
SAE AMS 4086N-2006 Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated, Cold Worked, and Naturally Aged 页
SAE AMS 4087G-2000 退火的(2024-0)拉制铝合金无缝管修补制品 8 页
SAE AMS 4087H-2006 Aluminum Alloy Tubing, Seamless, Drawn (2024-0) Reinstate Composition Annealed 页
SAE AMS 4088J-2000 固溶热处理的和冷处理的含4.4Cu-1.5Mg-0.60Mn(2024-T3)拉制铝合金无缝管 6 页
SAE AMS 4089D-2003 固溶热处理的、拉伸消除应力的和脱溶热处理的含1.6Cu-2.2Mg-0.22Cr-5.7Zn(7475-T7651)铝合金板材 10 页
SAE AMS 4090D-2000(R2006) 固溶热处理的、消除应力的和脱溶热处理的含5.7Zn-2.2Mg-1.6Cu-0.22Cr(7475-T651)铝合金板材 页
SAE AMS 4094C-2004 含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti镀铝的铝合金薄板和板材（固溶热处理、冷处理和脱溶热处理镀铝的2219-T81薄板；固溶热处理、消除应力和脱溶热处理镀铝的2219-T851板材） 6 页
SAE AMS 4095C-2004 含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti镀铝的铝合金薄板和板材（固溶热处理和冷处理镀铝的2219-T31薄板；固溶热处理和消除应力镀铝的2219-T351板材） 7 页
SAE AMS 4096B-2005 退火的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（镀铝的2219-0）镀铝的铝合金薄板和板材 页
SAE AMS 4100C-2000 固溶热和脱溶热处理的含5.7Zn-2.2Mg-1.6Cu-0.22Cr(镀铝的7475-T761)镀铝的铝合金薄板 8 页
SAE AMS 4101C-2001(R2006) 固溶热处理的、拉伸的和脱溶热处理的含4.4Cu-1.5Mg-0.60Mn(2124-T851)铝合金板材 页
SAE AMS 4107F-2005 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged UNS A97050 页
SAE AMS 4108F-2003 固溶热处理的、加压消除应力的和过老化的含6.2Zn-2.3Cu-2.2Mg-0.12Zr(7050-T7452)铝合金手工锻件 8 页
SAE AMS 4111C-2001 固溶热和脱溶热处理的含7.7Zn-2.5Mg-1.5Cu-0.16Cr(7049-T73)铝合金锻件 10 页
SAE AMS 4113E-2003 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T6)挤压的铝合金型材 5 页
SAE AMS 4114H-2006 Aluminum Alloy Bars and Rods, Rolled or Cold-Finished 2.5Mg - 0.25Cr (5052-F) As Fabricated UNS A95052 页
SAE AMS 4115G-2002 退火的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-0)轧制的或冷加工的铝合金棒材、杆材、线材和闪光焊接环件 6 页
SAE AMS 4116G-2002 冷加工的、固溶热处理的含1.0Mg-0.60Si-0.30Cu-0.20Cr(6061-T4)铝合金棒材、杆材、线材 6 页
SAE AMS 4117H-2001(R2006) 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061;-T6,-T651)轧制的或冷加工的铝合金棒材、杆材、线材和闪光焊接环件 页
SAE AMS 4118K-2001(R2006) 固溶热处理的含4.0Cu-0.70Mn-0.60Mg-0.50Si(2017;-T4,-T451)轧制的或冷加工的铝合金棒材、杆材、线材 页
SAE AMS 4120R-2002 轧制的或冷加工的铝合金棒材、杆材、线材（含4.4Cu-1.5Mg-0.60Mn(2024)固溶热处理的和时效处理的（T4）；固溶热处理的、冷处理的和时效处理的（T351）) 7 页
SAE AMS 4121G-1999 固溶热和脱溶热处理的含4.5Cu-0.85Si-0.80Mn-0.50Mg(2014-T6)轧制的或冷加工的铝合金棒材、杆材、线材 6 页
SAE AMS 4122J-2000 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T6)轧制的或冷加工的铝合金棒材、杆材、线材和环件 6 页
SAE AMS 4123H-2006 Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated UNS A97075 页
SAE AMS 4124D-2005 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged UNS A97075 页
SAE AMS 4125J-2001(R2006) 固溶热和脱溶热处理的含0.9Si-0.62Mg-0.25Cr(6151-T6)铝合金模锻件和轧制的或锻制的环件 页
SAE AMS 4126C-2005 Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated UNS A97075 页
SAE AMS 4127J-2005 Aluminum Alloy, Forgings and Rolled or Forged Rings (6061-T6) Solution and Precipitation Heat Treated UNS A96061 页
SAE AMS 4128C-2001 固溶热处理的和拉伸消除应力的含1.0Mg-0.60Si-0.30Cu-0.20Cr(6061-T451)轧制的或冷加工的铝合金棒材 6 页
SAE AMS 4130L-2001(R2006) 固溶热和脱溶热处理的含4.4Cu-0.85Si-0.80Mn(2025-T6)铝合金模锻件 页
SAE AMS 4131D-2005 Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged UNS A97075 页
SAE AMS 4132E-2000(R2006) 固溶热和脱溶热处理的含2.3Cu-1.6Mg-1.1Fe-1.0Ni-0.18Si-0.07Ti(2618-T61)铝合金模锻件和手工锻件、轧制的环件以及锻制的坯件 页
SAE AMS 4133D-2000(R2006) 固溶热和脱溶热处理的含4.4Cu-0.85Si-0.80Mn-0.50Mg(2014-T6)铝合金锻件和轧制的环件 页
SAE AMS 4134E-2006 Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat Treated UNS A92014 页
SAE AMS 4140H-2001(R2006) 固溶热和脱溶热处理的含4.0Cu-2.0Ni-0.68Mg(2018-T61)铝合金模锻件 页
SAE AMS 4141E-2000(R2006) 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T73)铝合金模锻件 页
SAE AMS 4143D-2001 固溶热和脱溶热处理的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T6)铝合金锻件和轧制的或锻制的环件 9 页
SAE AMS 4144F-2006 Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated (UNS A92219) 页
SAE AMS 4147C-1992(R2000) 固溶热处理的、加压消除应力的和过老化的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T7352)铝合金锻件 10 页
SAE AMS 4148D-1999 固溶热和脱溶热处理的(7175-T66)铝合金模锻件 8 页
SAE AMS 4149D-2002 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7175-T74)铝合金模锻件和手工锻件 9 页
SAE AMS 4150L-2003 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T6)铝合金挤压件和环件 6 页
SAE AMS 4152L-1993(R2000) 固溶热处理的含4.4Cu-1.5Mg-0.60Mn(2024-T3)铝合金挤压件 7 页
SAE AMS 4153K-2003 固溶热和脱溶热处理的含4.5Cu-0.85Si-0.80Mn-0.50Mg(2014-T6)铝合金挤压件 7 页
SAE AMS 4154N-2003 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T6)铝合金挤压件 7 页
SAE AMS 4156K-2003 固溶热和脱溶热处理的含0.68Mg-0.40Si(6063-T6)铝合金挤压件 5 页
SAE AMS 4157C-1994 固溶热处理的、消除应力的和过老化的含7.7Zn-2.4Mg-1.6Cu-0.16Cr(7049-T73511)铝合金挤压件 7 页
SAE AMS 4159D-2003 固溶热处理的、消除应力的、矫直的和过老化的含7.7Zn-2.4Mg-1.6Cu-0.16Cr(7049-T76511)铝合金挤压件 6 页
SAE AMS 4160G-2005 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0) Annealed UNS A96061 页
SAE AMS 4161G-2002 固溶热处理的和时效处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T4)铝合金挤压件 6 页
SAE AMS 4162D-2003 固溶热处理的、拉伸消除应力的、矫直的和脱溶热处理的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T8511)铝合金挤压件 6 页
SAE AMS 4163D-2003 固溶热处理的、拉伸消除应力的和矫直的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T3511)铝合金挤压件 7 页
SAE AMS 4164H-2003 拉伸消除应力的和未矫直的含4.4Cu-1.5Mg-0.60Mn(2024-T3510)铝合金挤压件 6 页
SAE AMS 4165H-2003 固溶热处理的、拉伸消除应力的和矫直的含4.4Cu-1.5Mg-0.60Mn(2024-T3511)铝合金挤压件 6 页
SAE AMS 4166F-2003 固溶热处理的和过老化的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T73)铝合金挤压件 8 页
SAE AMS 4167H-2005 固溶热处理、拉伸消除应力和过老化含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T73511)的铝合金挤压件 8 页
SAE AMS 4168J-2003 固溶热处理的、拉伸消除应力的和脱溶热处理的、未矫直的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T6510)铝合金挤压件 7 页
SAE AMS 4169K-2003 固溶热处理的、拉伸消除应力的、矫直的和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T6511)铝合金挤压件 8 页
SAE AMS 4172E-2005 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved by Stretching UNS A96061 页
SAE AMS 4173E-2003 固溶热处理的、拉伸消除应力的、矫直的和脱溶热处理的含1.0Mg-0.60Si-0.30Cu-0.20Cr(6061-T6511)铝合金挤压件 5 页
SAE AMS 4174D-2005 Aluminum Alloy, Flash Welded Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated UNS A97075 页
SAE AMS 4177C-1995 5056,350(177)夹层结构用挠性铝合金蜂窝芯 14 页
SAE AMS 4177D-2006 Core, Flexible Honeycomb, Aluminum Alloy For Sandwich Construction 5056, 350 (177) 页
SAE AMS 4178C-1995 5052,350(177)夹层结构用处理过的挠性铝合金蜂窝芯 14 页
SAE AMS 4178D-2006 Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction 5052, 350 (177) 页
SAE AMS 4179C-2002 固溶热处理的、消除应力的和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7175-T7452)铝合金锻件 9 页
SAE AMS 4180E-1993(R2000) 最低铝含量为99.0％的(1100-H18)铝丝 5 页
SAE AMS 4181C-2003 含7.0Si-0.38Mg-0.10Ti(4008或356)的铝合金焊丝 6 页
SAE AMS 4182F-2001 退火的含5.0Mg-0.12Mn-0.12Cr(5056-0)的铝合金丝 5 页
SAE AMS 4183-2005 Aluminum Alloy, Extruded Profiles (2027-T3511) 4.4Cu 1.2Mg - 0.8Mn 0.10Zr Solution Heat Treated and Stress Relieved by Stretching UNS A92027 页
SAE AMS 4184E-2000 含10Si-4.0Cu(4145)的铝钎焊丝 5 页
SAE AMS 4185D-2000 含12Si(4047)的铝钎焊丝 6 页
SAE AMS 4186C-2004 装配式的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-F)轧制的或冷加工的铝合金棒材、杆材和线材 5 页
SAE AMS 4189F-2003 含4.1Si-0.20Mg(4643)的铝合金焊丝 5 页
SAE AMS 4190G-2003 含5.2Si(4043)的铝合金焊丝 5 页
SAE AMS 4191G-2003 含6.3Cu-0.30Mn-0.18Zr-0.15Ti-0.10V(2319)的铝合金焊丝 5 页
SAE AMS 4193C-2005 固溶热处理的、冷处理的和脱溶热处理的含4.4Cu-1.5Mg-0.60Mn(2024-T861)铝合金薄板和板材 5 页
SAE AMS 4195C-2002 固溶热处理的、冷处理的和脱溶热处理的含4.4Cu-1.5Mg-0.60Mn(镀铝的2024和1-1/2%镀铝的2024-T861平薄板；1-1/2%镀铝的2024-T861板材)镀铝的铝合金薄板和板材 7 页
SAE AMS 4200B-2005 固溶热处理、消除应力和脱溶热处理含7.7Zn-2.4Mg-1.6Cu-0.16Cr(7049-T7351)的铝合金板材 6 页
SAE AMS 4201E-2003 固溶热处理的、消除应力的和过老化的含6.2Zn-2.3Cu-2.2Mg-0.12Zr(7050-T7651)铝合金板材 8 页
SAE AMS 4202D-2005 固溶热处理的、拉伸消除应力的和脱溶热处理的含5.7Zn-2.2Mg-1.6Cu-0.22Cr(7475-T7351)铝合金板材 页
SAE AMS 4203C-2005 固溶热处理、消除应力和脱溶热处理的含6.2Zn-1.8Cu-2.4Mg-0.13Zr(7010-T7351)铝合金板材 页
SAE AMS 4204C-2003 固溶热处理的、消除应力的和脱溶热处理的含6.2Zn-1.8Cu-2.4Mg-0.13Zr(7010-T7651)铝合金板材 9 页
SAE AMS 4205C-2003 固溶热处理的、消除应力的和脱溶热处理的含6.2Zn-1.8Cu-2.4Mg-0.13Zr(7010-T73651)或(7010-T7451)铝合金板材 9 页
SAE AMS 4206-1999 固溶热处理的、消除应力的和过老化的(7055-T7751)含8.0Zn-2.3Cu-2.0Mg-0.16Zr铝合金板材 6 页
SAE AMS 4206A-2006 Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged UNS A97055 页
SAE AMS 4207A-1989(R1994) 固溶热和脱溶热处理的含5.7Zn-2.2Mg-1.6Cu-0.22Cr(7475-T61)镀铝的铝合金薄板 9 页
SAE AMS 4207B-2006 Aluminum Alloy Sheet, Alclad 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475- T61) Solution and Precipitation Heat Treated 页
SAE AMS 4208B-2005 Aluminum Alloy Sheet 6.0Cu - 0.40Zr - (2004-F) As Rolled UNS A92004 页
SAE AMS 4209B-2005 Aluminum Alloy Sheet, Alclad 6.0Cu - 0.40Zr - (2004-F) As Rolled UNS A82004 页
SAE AMS 4210K-2005 脱溶热处理的含5.0Si-1.2Cu-0.50Mg(355.0-T51)铝合金铸件 9 页
SAE AMS 4211A-2000 固溶热处理的、消除应力的和过老化的含6.2Zn-1.9Cu-2.1Mg-0.10Zr(7040-T7451)铝合金板材 9 页
SAE AMS 4212J-2005 (R) Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated UNS A03550 页
SAE AMS 4213-2005 Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged 页
SAE AMS 4214H-2001(R2006) 固溶热处理的和稳定处理的含5.0Si-1.2Cu-0.50Mg(355.0-T71)砂型铝合金铸件 页
SAE AMS 4215G-2001(R2006) 固溶热和脱溶热处理的含5.0Si-1.2Cu-0.50Mg(C355.0-T6)铝合金铸件 页

       SAE AMS 3273E-1991(R2005) 耐风化的尼龙织物增强的氯丁二烯橡胶薄板 页
SAE AMS 3274G-1991(R2005) 耐燃料的尼龙织物增强的丁腈橡胶薄板和模制型材 页
SAE AMS 3275B-1999 耐燃料及油的非石棉纤维和丁腈橡胶的薄板 8 页
SAE AMS 3276D-2003 间歇使用至360°F(182°C)的整体燃料罐和一般用途的密封化合物 23 页
SAE AMS 3277C-2004 间歇使用至400°F(204°C)的整体燃料罐和一般用途的聚硫醚橡胶快速固化的密封化合物 20 页
SAE AMS 3278-2004 用于整体燃料箱/燃料腔/一般用途的耐燃料高抗拉强度/高拉伸的聚亚胺酯密封和涂层化合物 13 页
SAE AMS 3279B-2005 间歇使用至350°F (171°C)整体燃料箱和燃料电池腔用可喷射的密封化合物 页
SAE AMS 3281C-2003 间歇使用至360°F (182°C)整体燃料罐和燃料电池腔用低密度(1.20-1.35 sp gr)聚硫化物合成橡胶密封化合物 18 页
SAE AMS 3283A-1998 耐温和耐燃料的沟槽注入非固化的聚硫化物密封化合物 21 页
SAE AMS 3284A-2005 用于可移动仪表板和燃料箱检查刻度盘的低粘附强度密封剂 页
SAE AMS 3285E-1993(R2006) 白色100%羊毛毡的背面检查 页
SAE AMS 3286E-1993(R2006) 白色100%羊毛毡的厚实衬垫 页
SAE AMS 3301G-1990(R2001) 硬度40一般用途的硅酮橡胶 9 页
SAE AMS 3302G-1990(R2001) 硬度50一般用途的硅酮橡胶 9 页
SAE AMS 3303J-1990(R2001) 硬度60一般用途的硅酮橡胶 8 页
SAE AMS 3304G-1990(R2001) 硬度70一般用途的硅酮橡胶 8 页
SAE AMS 3305H-1990(R2001) 硬度80一般用途的硅酮橡胶 8 页
SAE AMS 3306B-1998 高模量55-65，1200psi(8.27MPa)的硅酮橡胶 8 页
SAE AMS 3307C-1991(R2003) 65-75不耐油的低压缩形变的硅酮橡胶 6 页
SAE AMS 3310-1997(R2001) 白色、硬度65-75、高强度、低烟密度阻燃的硅酮橡胶 8 页
SAE AMS 3315F-1991(R2005) 玻璃纤维织物增强的硅酮橡胶薄板 页
SAE AMS 3316-2001 玻璃纤维织物增强的硅酮橡胶 7 页
SAE AMS 3320G-1992(R2001) 60-80耐热和耐风化的玻璃纤维织物增强的硅酮橡胶薄板 8 页
SAE AMS 3323-1990(R2001) 海绵状闭孔氟硅氧烷橡胶 8 页
SAE AMS 3325D-1994(R2001) 55-65耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3327C-1994(R2001) 70-80耐高温燃料和油的氟硅氧烷橡胶 7 页
SAE AMS 3328A-1994(R2001) 35-45耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3329A-1994(R2001) 45-55高强度耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3330A-1994(R2001) 45-55耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3331A-1994(R2001) 65-75耐燃料和油的氟硅氧烷橡胶 8 页
SAE AMS 3332D-1990(R2001) 15-30耐超低温的硅酮橡胶 9 页
SAE AMS 3333-1998 250°F (121°C)以下使用的飞机挡风玻璃和天蓬的聚硫化物密封剂 17 页
SAE AMS 3334D-1990(R2001) 35-45耐超低温的硅酮橡胶 9 页
SAE AMS 3336D-1994(R2001) 55-65耐超低温的硅酮橡胶 8 页
SAE AMS 3337D-1991(R1998) 65-75耐超低温的硅酮橡胶 9 页
SAE AMS 3338F-1991(R1998) 75-85耐超低温的硅酮橡胶 8 页
SAE AMS 3345E-1992(R2001) 45 - 55，抗拉强度1000psi(6.90 MPa)的硅酮橡胶 7 页
SAE AMS 3346F-1996(R2001) 硬度55-65，最小抗拉强度1000psi(6.89 MPa)的硅酮橡胶 7 页
SAE AMS 3347B-1991(R2003) 高模量45-55，1200psi(8.27MPa)的硅酮橡胶 7 页
SAE AMS 3348C-1994(R2000) 高弹性25-35，抗拉强度1150psi(7.93MPa)的硅酮橡胶 8 页
SAE AMS 3349C-1993(R1998) 高弹性65-75，抗拉强度1100psi(7.58MPa)的硅酮橡胶 8 页
SAE AMS 3352B-2000 玻璃纤维织物增强的硅酮橡胶 8 页
SAE AMS 3356E-1991(R2003) 电气等级55-65耐润滑油和压缩形变的硅酮橡胶 8 页
SAE AMS 3357G-1991(R2003) 65-75耐润滑油和压缩形变的硅酮橡胶 7 页
SAE AMS 3358B-1995(R2001) 一般用途的粘度为80-180泊(8-18Pa-s)两部分硅酮橡胶封装化合物 8 页
SAE AMS 3359B-1995(R2001) 一般用途的粘度为200-400泊(20-40Pa-s)两部分硅酮橡胶封装化合物 8 页
SAE AMS 3361B-1995(R2001) 一般用途的粘度为150-400泊(15-40Pa-s)两部分硅酮橡胶封装化合物 8 页
SAE AMS 3362C-1990(R2001) 硬度35-55，粘度为15000厘泊的室温硫化的硅酮橡胶化合物 7 页
SAE AMS 3363D-1990(R2001) 硬度30-45，粘度为50000厘泊的室温硫化的硅酮橡胶化合物 7 页
SAE AMS 3364C-1990(R2001) 硬度35-55，粘度为50000厘泊，短适用期的室温硫化的硅酮橡胶化合物 7 页
SAE AMS 3368A-1988(R2001) 高温固化的透明的硅酮树脂橡胶 7 页
SAE AMS 3370A-1988(R2001) 室温固化的透明的硅酮树脂橡胶 7 页
SAE AMS 3372A-1988(R2001) 高温固化的高拉裂强度的硅酮树脂橡胶 7 页
SAE AMS 3373/1A-1987(R2001) 室温固化的低粘度的耐油和耐硫化还原的绝缘和密封用硅酮橡胶化合物 2 页
SAE AMS 3373/2A-1987(R2001) 室温固化的中粘度的耐油和耐硫化还原的绝缘和密封用硅酮橡胶化合物 2 页
SAE AMS 3373B-1995(R2001) 35-55绝缘和密封用硅酮橡胶化合物 16 页
SAE AMS 3374/1-1996 飞机防火隔板用一部分硅酮密封化合物（1类） 4 页
SAE AMS 3374/2-1996 防火隔板密封剂 两部分添加剂固化的硅酮密封化合物（2类） 4 页
SAE AMS 3374/3-1996 防火隔板密封剂 两部分浓缩固化的密封化合物（3类） 4 页
SAE AMS 3374/4-1996 防火隔板密封剂 两部分聚硫化物的密封化合物（4类） 4 页
SAE AMS 3374C-2005 飞机防火隔板用密封化合物 页
SAE AMS 3375B-2001 一部分室温硫化的耐芳香烃燃料的氟硅氧烷胶粘剂/密封剂 页
SAE AMS 3376A-1992 耐温和耐燃料的沟槽注入非固化的密封化合物 19 页
SAE AMS 3377-1993(R2000) 防腐蚀可电导的密封化合物 19 页
SAE AMS 3378A-2005 耐非燃料、室温硫化的通用两件式硅酮密封剂 页
SAE AMS 3380D-1991(R1995) 金属丝编织增强的聚四氟乙烯碳氟树脂软管 24 页
SAE AMS 3382C-1999 70-80和85-95耐液压用液体和合成油的四氟乙烯/丙烯橡胶 10 页
SAE AMS 3383-1995(R2001) 75-85耐高温燃料和油的聚四氟乙烯-氟硅氧烷橡胶 7 页
SAE AMS 3386D-1993(R1999) 可折叠的织物增强的包覆氯丁二烯的丁腈橡胶飞机加油软管 7 页
SAE AMS 3387E-1993(R1999) 不可折叠的织物增强的包覆氯丁二烯的丁腈橡胶飞机加油软管 7 页
SAE AMS 3388D-1993(R1999) 不可折叠的金属丝编织增强的包覆氯丁二烯的丁腈橡胶飞机加油软管 7 页
SAE AMS 3389D-1993(R1999) 不可折叠的双金属丝编织增强的包覆氯丁二烯的丁腈橡胶飞机加油软管 7 页
SAE AMS 3410J-1998(R2006) 银钎焊的焊剂 页
SAE AMS 3411D-1998(R2006) 高温银钎焊的焊剂 页
SAE AMS 3412E-2003 焊炬或熔炉钎焊用的铝钎焊焊剂 6 页
SAE AMS 3414D-2002 铝焊接的焊剂 7 页
SAE AMS 3415C-2000 1030°F (554°C)或较低温度液态的铝沉浸钎焊的焊剂 6 页
SAE AMS 3415D-2006 Flux, Aluminum Dip Brazing 1030 Degrees F (554 Degrees C) or Lower Liquidus 页
SAE AMS 3417B-2002 高温钎焊的焊剂 5 页
SAE AMS 3420F-2001(R2006) 硅胶脱水剂 页
SAE AMS 3430C-2001(R2006) 水稀释的铜焊膏 页
SAE AMS 3529A-1993(R1998) 未增塑的乙烯基共聚物塑料薄板和薄膜 10 页
SAE AMS 3564E-1993(R2000) 硬化纤维板 9 页
SAE AMS 3568/1A-1993(R2006) Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density 页
SAE AMS 3568/2A-1993(R2006) Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic Foot (240 kg/m3) Density 页
SAE AMS 3568/3A-1993(R2006) Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 20 Pounds/Cubic Foot (320 kg/m3) Density 页
SAE AMS 3568A-1991(R2001) 缓冲用泡沫状聚醚氨基甲酸乙酯橡胶薄板 13 页
SAE AMS 3570E-1993(R2001) 中等挠性开孔的聚亚氨酯泡沫材料 8 页
SAE AMS 3571/1B-1991(R2001) “A”型硬度45未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/2B-1991(R2001) “A”型硬度55未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/3B-1991(R2001) “A”型硬度65未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/4B-1991(R2001) “A”型硬度75未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/5B-1991(R2001) “A”型硬度85未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/6B-1991(R2001) “A”型硬度95未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/7B-1991(R2001) “D”型硬度55未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/8B-1991(R2001) “D”型硬度65未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571/9B-1991(R2001) “D”型硬度75未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 3 页
SAE AMS 3571B-1991(R2001) 未填充固体的挠性聚醚氨基甲酸乙酯树脂铸件 6 页
SAE AMS 3573B-1994(R2003) 80-90耐低温实心的挠性聚醚型聚亚氨酯树脂铸件 7 页
SAE AMS 3579D-1996(R2003) 收缩率为1.6-1的热收缩挠性不交联的电绝缘聚氯乙烯塑料管 11 页
SAE AMS 3582A-1979(R2003) 收缩率为2-1的热收缩挠性交联的电绝缘聚氯乙烯塑料管 9 页
SAE AMS 3587D-1993 收缩率为2-1的热收缩（低回复温度）极高挠性的着色的辐照处理的电绝缘聚烯烃塑料管 10 页
SAE AMS 3588D-1993 收缩率为2-1的热收缩极高挠性的透明的辐照处理的电绝缘聚烯烃塑料管 10 页
SAE AMS 3593A-1991(R2003) 低量漏气的标志套管级热收缩半刚性辐照处理的电绝缘聚偏二氟乙烯塑料管 10 页
SAE AMS 3599A-1991(R2004) 可燃性受控的覆铜箔玻璃纤维织物增强的环氧树脂塑料薄板 16 页
SAE AMS 3601D-1992(R2004) 保持热强度的覆铜箔玻璃纤维织物增强的环氧树脂塑料薄板 17 页
SAE AMS 3603A-2002 飞机外部用的高性能聚合的压合胶粘剂保护薄膜 21 页
SAE AMS 3605F-1993(R1998) 棉织物增强的酚甲醛成形塑料薄板 12 页
SAE AMS 3607F-1993(R1998) 棉织物增强的酚甲醛塑料薄板 10 页
SAE AMS 3609D-1998 耐热的甲基丙烯酸甲酯塑料薄板 12 页
SAE AMS 3611D-1994(R2003) 一般用途的聚碳酸酯塑料薄板 7 页
SAE AMS 3612B-1993(R1998) 一般用途的电气级聚酯薄膜 9 页
SAE AMS 3613C-1998 覆铜箔的聚酯薄膜 8 页
SAE AMS 3614B-1994(R2003) 带涂层的光学级聚碳酸酯薄板和零件 11 页
SAE AMS 3615E-1993(R1998) 棉织物增强的酚甲醛塑料管 10 页
SAE AMS 3617D-1994(R2003) 尼龙塑料模压件和挤压件 7 页
SAE AMS 3619C-1993(R1998) 耐高温315°C (599°F)的层压聚酰亚胺树脂 11 页
SAE AMS 3623D-1993 收缩率为1.750-1的热收缩挠性辐照处理的电绝缘氯丁橡胶管 11 页
SAE AMS 3625B-1989(R1994) 收缩率为1.750-1的热收缩挠性着色的交联的电绝缘硅酮橡胶管 9 页
SAE AMS 3626F-1993(R1998) 甲基丙烯酸甲酯塑料模压件和挤压件 7 页
SAE AMS 3628D-1993(R1998) 一般用途的聚碳酸酯塑料模压件和挤压件 8 页
SAE AMS 3631C-1998 高温挠性聚氯乙烯塑料挤压件 11 页
SAE AMS 3632E-1991(R1995) 收缩率为2-1的热收缩半刚性辐照处理的电绝缘聚偏二氟乙烯塑料管 10 页
SAE AMS 3634D-1993 热收缩半刚性有选择交联的电绝缘聚烯烃塑料管 10 页
SAE AMS 3635D-1993(R1998) 闭孔改性的乙烯基泡沫塑料薄板和带材 9 页
SAE AMS 3636G-1991(R1995) 收缩率为2-1的热收缩挠性着色的辐照处理的电绝缘聚烯烃塑料管 9 页
SAE AMS 3637F-1993 收缩率为2-1的热收缩挠性的透明的辐照处理的电绝缘聚烯烃塑料管 11 页
SAE AMS 3638F-1993 收缩率为2-1的热收缩半刚性的着色的辐照处理的电绝缘聚烯烃塑料管 10 页
SAE AMS 3639F-1993 收缩率为2-1的热收缩半刚性的透明的辐照处理的电绝缘聚烯烃塑料管 10 页
SAE AMS 3642D-1993(R1998) 耐热的玻璃纤维织物增强的层压热固性树脂塑料模压件 8 页
SAE AMS 3643B-1992(R2004) 耐热的填充玻璃纤维粗纱的热固性硅酮塑料模压件 9 页
SAE AMS 3644F-2001 模压的聚酰亚胺的杆材、棒材、管材、板材和成形的零件 8 页
SAE AMS 3645C-1991(R2003) 未增塑的加压模制的聚氯三氟乙烯大型材 页
SAE AMS 3646C-1991(R2003) 未增塑的模压聚氯三氟乙烯薄板 7 页
SAE AMS 3647C-1993(R2006) Polyfluoroethylene Propylene Film and Sheet 页
SAE AMS 3648B-1991(R2003) 未增塑的聚氯三氟乙烯管 8 页
SAE AMS 3649C-1991(R2003) 未增塑的聚氯三氟乙烯薄膜 6 页
SAE AMS 3650C-1991(R2003) 未增塑的聚氯三氟乙烯杆材、薄板和模制型材 7 页
SAE AMS 3652C-1993(R2006) 非临界级的聚四氟乙烯薄膜 页
SAE AMS 3653E-1993(R1999) 挤压的标准壁厚聚四氟乙烯电绝缘管 10 页
SAE AMS 3654C-1993(R1999) 挤压的薄壁聚四氟乙烯电绝缘管 10 页
SAE AMS 3655B-1993(R1999) 挤压的薄壁聚四氟乙烯电绝缘管 10 页
SAE AMS 3656E-1993(R1998) 烧结的标准强度聚四氟乙烯挤压件 13 页
SAE AMS 3657C-1993(R1998) 烧结的高强度聚四氟乙烯挤压件 12 页
SAE AMS 3658C-1993(R1998) 经射线检查的已烧结和消除应力的高强度聚四氟乙烯挤压件 12 页
SAE AMS 3659C-1993(R1998) 已烧结和消除应力的高强度聚四氟乙烯挤压件 12 页
SAE AMS 3660C-1994(R2003) 烧结的一般用途的聚四氟乙烯模压件 8 页
SAE AMS 3661C-1993(R2006) 优质聚四氟乙烯薄膜 页
SAE AMS 3662C-1991(R2006) Polytetrafluoroethylene Film General Purpose Grade 页
SAE AMS 3664B-1988(R1994) 涂覆乙烯基共聚物树脂的玻璃纤维织物 7 页
SAE AMS 3666D-1993(R1998) 玻璃纤维织物增强的聚四氟乙烯薄板 12 页
SAE AMS 3667C-1993(R1998) 一般用途的烧结的模压聚四氟乙烯薄板 8 页
SAE AMS 3668C-1994(R2003) 优质烧结的聚四氟乙烯模压件 8 页
SAE AMS 3669D-1993(R1998) 优质烧结的模压聚四氟乙烯薄板 8 页
SAE AMS 3670/1B-1995(R2004) 未充填的聚酰胺-酰亚胺棒材、杆材和型材 3 页
SAE AMS 3670/2B-1992(R2006) Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled 页
SAE AMS 3670/3B-1995(R2004) 充填12%石墨-3%聚四氟乙烯的聚酰胺-酰亚胺棒材、杆材和型材 3 页
SAE AMS 3670/4C-1995(R2000) 30%玻璃纤维聚酰胺-酰亚胺棒材、杆材和型材 3 页
SAE AMS 3670/5C-1995(R2000) 30%碳纤维聚酰胺-酰亚胺棒材、杆材和型材 3 页
SAE AMS 3670B-1995(R2003) 模压或挤压的聚酰胺-酰亚胺棒材、杆材和型材 6 页
SAE AMS 3673B-1997 硅橡胶衬底铝作表面的玻璃纤维织物 12 页
SAE AMS 3677-1992(R2005) 注入聚四氟乙烯烧结的聚苯并咪唑聚酰胺玻璃纤维织物 页
SAE AMS 3678/10-2004(R2006) Type 10 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 15% Carbon Fiber 页
SAE AMS 3678/1A-2004(R2006) Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions 页
SAE AMS 3678/2-1999(R2006) Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions 页
SAE AMS 3678/3-1999(R2006) Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions 页
SAE AMS 3678/4-1999(R2006) Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions 页
SAE AMS 3678/5-1999(R2006) Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment 页
SAE AMS 3678/6-1999(R2006) Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions 页
SAE AMS 3678/7-2004(R2006) Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite 页
SAE AMS 3678/8-2004(R2006) Type 8 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 10% Carbon Fiber 页
SAE AMS 3678/9A-2006 Type 9 Virgin Polytetrafluoroethylene (PTFE) Moldings with Pigment for AS4716 and AS5857 Backup Rings 页
SAE AMS 3678B-2006 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components 页
SAE AMS 3679B-1993(R2006) 陶瓷纤维的隔热性 页
SAE AMS 3680C-1993(R2006) 二氧化硅纤维的隔热性 页
SAE AMS 3681C-1995(R2005) 充填银的导电环氧树脂粘合剂 页
SAE AMS 3683A-1993(R2001) 收缩率为2-1的热收缩耐火的挠性辐照处理的改性的含氟聚合物电绝缘塑料管 10 页
SAE AMS 3686A-1991(R2005) 耐高温315°C (599°F)聚酰亚胺树脂胶粘浆糊和薄膜 页
SAE AMS 3688B-1988(R2005) -55°C- +82°C (-65°F- +180°F)蜂窝状结构中心连接用泡沫胶粘剂 页
SAE AMS 3689B-1988(R2005) -54°C- +177°C (-65°F- +350°F)蜂窝状结构中心连接用泡沫胶粘剂 页
SAE AMS 3690B-1993(R2000) 室温固化的环氧胶粘剂化合物 7 页
SAE AMS 3692C-1995(R2005) 高温用环氧树脂胶粘剂化合物 页
SAE AMS 3695/1-1983(R2001) 适用于95°C (200°F)的高耐久性环氧基胶粘薄膜 9 页
SAE AMS 3695/2-1983(R2001) 适用于120°C (250°F)的高耐久性环氧基胶粘薄膜 9 页
SAE AMS 3695/3-1983(R2001) 适用于175°C (350°F)的高耐久性环氧基胶粘薄膜 9 页
SAE AMS 3695/4-1983(R2001) 适用于215°C (420°F)的高耐久性环氧基胶粘薄膜 9 页
SAE AMS 3695-1983(R2001) 高耐久性胶粘结构粘接用环氧基胶粘薄膜 13 页
SAE AMS 3704A-1993(R1998) 改进的接触型氯丁橡胶树脂胶粘剂 8 页
SAE AMS 3705A-1993(R1998) 脂环族液态环氧树脂 6 页
SAE AMS 3710C-1993(R1998) 耐热低压模制的玻璃纤维织物树脂的夹层结构 10 页
SAE AMS 3711E-2001 涂覆酚醛的芳族聚酰胺基纤维蜂窝状芯材 12 页
SAE AMS 3712C-2001 玻璃纤维/聚酰亚胺的蜂窝状芯材 10 页
SAE AMS 3713D-1996(R2003) 涂覆酚醛的聚酰胺纸基的挠性蜂窝状芯材 10 页
SAE AMS 3714D-1995(R2003) 涂覆酚醛的聚酰胺纸基的超膨胀蜂窝状芯材 9 页
SAE AMS 3715D-2004 玻璃纤维/酚醛蜂窝状芯材 12 页
SAE AMS 3716C-1998 斜纹纤维结构的玻璃纤维/酚醛蜂窝状芯材 11 页
SAE AMS 3718B-1998(R2006) Webbing, Woven Nylon For Decelerators 页
SAE AMS 3722A-1988(R1994) 125 lb (55 kg)蜂窝状纸 7 页
SAE AMS 3726/2A-1991(R2001) 充填树脂化合物的预催化薄板的垫片 3 页
SAE AMS 3726/3A-1991(R2001) 充填液态预催化树脂化合物的垫片 4 页
SAE AMS 3726C-1998(R2006) 充填树脂化合物的垫片 页
SAE AMS 3728A-1994 低分子量的甲酚酚醛环氧树脂 6 页
SAE AMS 3729A-1994(R2005) 未充填耐中温的热固性环氧树脂基体 页
SAE AMS 3751B-1990(R2003) 空心的微小玻璃球 7 页
SAE AMS 3753A-1992(R1998) 空心的微小碳球 8 页
SAE AMS 3755/1A-1992(R2003) 稠化率为95的无定形的二氧化硅粉末 2 页
SAE AMS 3755/2A-1992(R2003) 稠化率为95的无定形的二氧化硅粉末 2 页
SAE AMS 3755B-2001 无定形的二氧化硅粉末 6 页
SAE AMS 3756A-1989(R1994) 25玻璃纤维75聚四氟乙烯树脂烧结的已充填玻璃纤维的聚四氟乙烯模压件 8 页
SAE AMS 3778/1A-1990(R1994) 350磅(1557N)强度的机织尼龙带 3 页
SAE AMS 3778/2A-1990(R1994) 290磅(1290N)强度的机织尼龙带 3 页
SAE AMS 3778/3A-1990(R1994) 400磅(1779N)强度的尼龙机织带状织物 3 页
SAE AMS 3778/4A-1990(R1994) 2600磅(11565N)强度的尼龙机织带状织物 3 页
SAE AMS 3778/5A-1990(R1994) 900磅(4003N)强度的尼龙机织带状织物 3 页
SAE AMS 3778A-1990(R1994) 尼龙机织带和带状织物 13 页
SAE AMS 3779/1A-1990(R1994) 铝箔/玻璃纤维织物耐热辐射的压合胶粘带 2 页
SAE AMS 3779/2A-1990(R1994) 玻璃纤维织物涂覆铝的耐热辐射的压合胶粘带 2 页
SAE AMS 3779A-1990(R1994) 耐热辐射的压合胶粘带 7 页
SAE AMS 3782/1A-1990(R1994) 0.25盎司/码(9.6g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782/2A-1990(R1994) 0.30盎司/码(12g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782/3A-1990(R1994) 0.35盎司/码(14g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782/4A-1990(R1994) 0.50盎司/码(20g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782/5A-1990(R1994) 0.70盎司/码(28g/m)中模量对芳族聚酰胺的管状织带 2 页
SAE AMS 3782A-1990(R1994) 中模量对芳族聚酰胺的管状织带 22 页
SAE AMS 3787/1A-1991(R2001) 断裂强度为10,000码/磅(20,159 m/kg),16磅(71 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/2A-1991(R2001) 断裂强度为6700码/磅(13507 m/kg),25磅(111 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/3A-1991(R2001) 断裂强度为5000码/磅(10080 m/kg),35磅(156 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/4A-1991(R2001) 断裂强度为3350码/磅(6753 m/kg),50磅(222 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/5A-1991(R2001) 断裂强度为2000码/磅(4032 m/kg),80磅(356 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/6A-1991(R2001) 断裂强度为950码/磅(1915 m/kg),150磅(667 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/7A-1991(R2001) 断裂强度为850码/磅(1714 m/kg),175磅(778 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787/8A-1991(R2001) 断裂强度为500码/磅(1008m/kg),225磅(1001 N)的中模量对芳族聚酰胺线 3 页
SAE AMS 3787A-1991(R2001) 中模量对芳族聚酰胺线 10 页
SAE AMS 3791A-1990(R1994) 薄尼龙织物 11 页
SAE AMS 3792/1A-1989(R1994) 断裂强度为2(51),300(1334)的低模量芳族聚酰胺带 3 页
SAE AMS 3792/2A-1989(R1994) 断裂强度为2(51),1000(4448)的低模量芳族聚酰胺带 3 页
SAE AMS 3792/3A-1989(R1994) 断裂强度为2(51),3000(13345)的低模量芳族聚酰胺带 3 页
SAE AMS 3792B-1994 断裂强度为300(1334)，1000(4448)和8000(13,345)的低模量芳族聚酰胺带 14 页
SAE AMS 3793/10-1996 5/16英寸(7.9mm), 0.053盎司/码(1.64g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/11-1996 3/8英寸(9.5mm), 0.035盎司/码(1.09g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/12-1996 5/8英寸(15.9mm), 0.25盎司/码(7.75g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/1A-1996 1/2英寸(12.5mm), 0.06-0.56盎司/码(1.9-17.4 g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/2A-1996 9/16英寸(14mm), 0.08-0.13盎司/码(2.5-4.0g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/3A-1996 3/4英寸(19mm), 0.11-0.60盎司/码(3.4-18.6g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/4A-1996 1英寸(25mm), 0.08-1.65盎司/码(2.5-51.2g/m)中模量对芳族聚酰胺织带和带状织物 3 页
SAE AMS 3793/5A-1996 1-1/8英寸(28mm), 0.23-2.00盎司/码(7.1-62.0g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/6A-1996 1-1/4英寸(31mm), 0.23盎司/码(7.1g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/7A-1996 1-1/2英寸(37.5mm), 0.12-0.47盎司/码(3.7-14.6g/m)中模量对芳族聚酰胺织带和带状织物 2 页
SAE AMS 3793/8A-1996 1-3/4英寸(44mm), 0.17-2.50盎司/码(5.3-77.5g/m)中模量对芳族聚酰胺织带和带状织物 4 页
SAE AMS 3793/9A-1996 2.00英寸(50mm), 0.12-1.10盎司/码(3.7-34.1g/m)中模量对芳族聚酰胺织带和带状织物 3 页
SAE AMS 3793A-1996 中模量对芳族聚酰胺织带和带状织物 21 页
SAE AMS 3797/10B-1994 断裂强度为10000 (44482)，宽度为1-1/8(29)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/11B-1994 断裂强度为11000 (48930)，宽度为1-1/8(29)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/12B-1994 断裂强度为12000 (53379)，宽度为1-1/8(29)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/1B-1994 断裂强度为1000 (4448)，宽度为5/8 (15.9)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/2B-1994 断裂强度为2000 (8896)，宽度为5/8 (15.9)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/3B-1994 断裂强度为3000 (13345)，宽度为1(25)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/4B-1994 断裂强度为4000 (17793)，宽度为1(25)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/5B-1994 断裂强度为5000 (22241)，宽度为1(25)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/6B-1994 断裂强度为6000 (26689)，宽度为1-1/16(27)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/7B-1994 断裂强度为7000 (31138)，宽度为1-1/16(27)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/8B-1994 断裂强度为8000 (35586)，宽度为1-1/16(27)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797/9B-1994 断裂强度为9000 (40034)，宽度为1-1/8(29)整体锁缝的尼龙带状织物 4 页
SAE AMS 3797B-1994 整体锁缝的尼龙带状织物 15 页
SAE AMS 3798/10B-1993(R1998) 宽度为1(25), 断裂强度为6000 (26689)低模量芳族聚酰胺人字形斜纹带状织物 5 页
SAE AMS 3798/11B-1993(R1998) 宽度为1-3/4(44), 断裂强度为10000 (44482)低模量芳族聚酰胺人字形斜纹带状织物 5 页
SAE AMS 3798/12B-1993(R1998) 宽度为1(25), 断裂强度为9000 (40034)低模量芳族聚酰胺特殊编织带状织物 4 页
SAE AMS 3798/13B-1993(R1999) 树脂浸渍的，宽度为1-23/32(44), 断裂强度为7300 (32472)低模量芳族聚酰胺斜纹带状织物 5 页
SAE AMS 3798/14B-1993(R1998) 宽度为1-1/4(32), 断裂强度为800 (3559)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/15B-1993(R1998) 宽度为1(25), 断裂强度为2500 (11121)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/16B-1992(R1997) 宽度为1-1/2(38), 断裂强度为1700 (7562)低模量芳族聚酰胺特殊编织带状织物 4 页
SAE AMS 3798/1B-1993(R1999) 树脂浸渍的，宽度为9/16(14), 断裂强度为500 (2224)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/2B-1993(R1999) 宽度为1(25), 断裂强度为600 (2669)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/3B-1993(R1998) 宽度为3/4(19), 断裂强度为600 (2669)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/4B-1993(R1998) 宽度为1-23/32(44), 断裂强度为5500 (24465)低模量芳族聚酰胺带有胶粘剂的双平织带状织物 4 页
SAE AMS 3798/5B-1993(R1999) 树脂浸渍的，宽度为1-23/32(44), 断裂强度为3600 (16014)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/6B-1993(R1998) 宽度为3-1/32(77), 断裂强度为9000 (40034)低模量芳族聚酰胺带有胶粘剂的双平织带状织物 4 页
SAE AMS 3798/7B-1993(R1998) 宽度为1-23/32(44), 断裂强度为8700 (38700)低模量芳族聚酰胺带有胶粘剂的双平织带状织物 4 页
SAE AMS 3798/8B-1993(R1998) 宽度为1-23/32(44), 断裂强度为1200 (5338)低模量芳族聚酰胺人字形斜纹带状织物 4 页
SAE AMS 3798/9B-1993(R1999) 树脂浸渍的，宽度为1-23/32(44), 断裂强度为6500 (28913)低模量芳族聚酰胺人字形斜纹带状织物 5 页
SAE AMS 3798B-1993(R1998) 低模量芳族聚酰胺带状织物 16 页
SAE AMS 3799/1B-1993(R2006) Webbing, Tubular, Low Modulus Aramid 9/16 (14) Wide, 1400 (6228) Breaking Strength 页
SAE AMS 3799/2B-1993(R2006) Webbing, Tubular, Low Modulus Aramid 3/4 (19) Wide, 2300 (10,231) Breaking Strength 页
SAE AMS 3799/3B-1993(R2006) Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17,793) Breaking Strength 页
SAE AMS 3799/4B-1993(R2006) Webbing, Tubular, Low Modulus Aramid 3-3/16 (81) Wide, 2250 (10,008) Breaking Strength 页
SAE AMS 3799B-1993(R2006) Webbing, Tubular, Low-Modulus Aramid-54 页
SAE AMS 3801/1A-1990(R2001) 重量为4.7(159)低模量间芳族聚酰胺的降落伞斜纹织物 4 页
SAE AMS 3801/2A-1990(R2001) 重量为6.5(220)低模量间芳族聚酰胺的降落伞特殊编织织物 5 页
SAE AMS 3801/3A-1990(R2001) 重量为12.0(407)低模量间芳族聚酰胺的降落伞特殊编织织物 5 页
SAE AMS 3801/4A-1990(R2001) 重量为7.0(237)低模量间芳族聚酰胺的降落伞平纹织物 4 页
SAE AMS 3801/5A-1990(R2001) 树脂浸渍的，重量为18.0(610)低模量间芳族聚酰胺的降落伞方平组织织物 3 页
SAE AMS 3801A-1990(R2004) 低模量间芳族聚酰胺的降落伞织物 10 页
SAE AMS 3803A-1992(R1997) 松散编织的棉擦布 6 页
SAE AMS 3805A-1992(R1997) 芳族聚酰胺非熔化的粗布织物 9 页
SAE AMS 3806E-1993(R2006) 断裂强度为80磅(356 N)的飞机用丝光棉布织物 页
SAE AMS 3807B-1999(R2006) 声音和振动衰减的压敏铝箔胶粘带 页
SAE AMS 3808A-1994 压敏屏蔽的胶粘带 9 页
SAE AMS 3809-1981(R1994) 系紧地毯的压敏双面胶粘带 4 页
SAE AMS 3811B-1993(R1998) 拉挤涂覆的聚酯树脂、芳族聚酰胺纤维棒材 11 页
SAE AMS 3812B-1993(R1998) 拉挤涂覆的聚酯树脂、玻璃纤维棒材 11 页
SAE AMS 3813/1A-1987(R1998) 芳族聚酰胺纤维绳 缆绳加夹套的 挤压夹套 4 页
SAE AMS 3813/2A-1987(R1998) 芳族聚酰胺纤维绳 平行绳股加夹套的 挤压夹套 4 页
SAE AMS 3813/3A-1987(R1998) 芳族聚酰胺纤维绳 平行纱线加夹套的 编织夹套 4 页
SAE AMS 3813A-1988(R1998) 天线用加夹套的芳族聚酰胺纤维绳 支撑系统 9 页
SAE AMS 3817D-1993(R1998) 电工捆扎用涂覆树脂的平编织尼龙带 8 页
SAE AMS 3819B-2001 飞机一、二级结构表面用清洗织物 15 页
SAE AMS 3820A-1995 环缝降落伞用尼龙织带 14 页
SAE AMS 3824C-1995(R2003) 树脂层压用精制的玻璃纤维织物 13 页
SAE AMS 3826B-1995 浸渍“B”级聚酯树脂的1581和7781式样“E”型玻璃纤维织物 10 页
SAE AMS 3827B-1991(R1995) 耐火的浸渍“B”级聚酯树脂的7781式样“E”型玻璃纤维织物 13 页
SAE AMS 3828C-1993(R1998) 预浸渍环氧树脂的“E”型玻璃纤维粗纱 7 页
SAE AMS 3829B-1993(R1998) 溶液添加剂型PMR-15浸渍聚酰亚胺树脂的7781式样“E”型玻璃纤维织物 10 页
SAE AMS 3831A-1992(R1997) 增加强度的耐火的浸渍“B”级环氧树脂的7781式样“E”型玻璃纤维织物 10 页
SAE AMS 3832C-1994 浸渍环氧树脂的“S-2”型玻璃纤维粗纱 9 页
SAE AMS 3834A-1998 增加强度的耐火的浸渍“B”级聚酯树脂的7781式样“E”型玻璃纤维织物 10 页
SAE AMS 3837D-1994 No.HTS-904精制的181式样“S”型玻璃纤维织物 9 页
SAE AMS 3844B-1994 热熔添加剂型浸渍聚酰亚胺树脂的7781式样“E”型玻璃纤维织物 12 页
SAE AMS 3845B-1991(R1997) 浸渍聚酰亚胺树脂“B”级添加剂固化的“E”型玻璃纤维织物 12 页
SAE AMS 3846C-1995 树脂层压用精制的石英织物 14 页
SAE AMS 3846D-2006 Cloth, Quartz Finished for Resin Laminates 页
SAE AMS 3847C-1994 315°C（599°F），浸渍“B”级聚酰亚胺树脂的581式样石英织物 13 页
SAE AMS 3849B-1994 热熔添加剂型浸渍聚酰亚胺树脂的581式样石英织物 13 页
SAE AMS 3865C-1991(R2005) 以钨为基底的连续硼纤维 页
SAE AMS 3867/1B-1991(R2001) B4.0-E374型(B0.102-E191型)浸渍环氧树脂的硼纤维带材 4 页
SAE AMS 3867/2B-1991(R2001) B5.6-E374型(B0.142-E190型)浸渍环氧树脂的硼纤维带材 5 页
SAE AMS 3867/3B-1991(R2001) B8.0-E374型(B0.203-E190型)浸渍环氧树脂的硼纤维带材 5 页
SAE AMS 3867/4A-1991(R2001) B4.0-E180型(B0.102-E82型)浸渍环氧树脂的硼纤维带材 5 页
SAE AMS 3867/5A-1991(R2001) B5.6-E180型(B0.142-E82型)浸渍环氧树脂的硼纤维带材 4 页
SAE AMS 3867/6A-1991(R2001) B8.0-E180型(B0.203-E82型)浸渍环氧树脂的硼纤维带材 5 页
SAE AMS 3867B-1991(R2001) 浸渍环氧树脂的硼纤维带材 18 页
SAE AMS 3890A-1996(R2005) 非结构的5股线、720细丝的石墨纱线 页
SAE AMS 3892/10A-1992(R2005) 抗拉强度为550(3792), 抗拉模量为38(262)的结构复合材料用碳纤维丝条 页
SAE AMS 3892/11A-1992(R2005) 抗拉强度为450(3103), 抗拉模量为32(221)的结构复合材料用碳纤维丝条 页
SAE AMS 3892/12-1992(R2005) 抗拉强度为730(5033), 抗拉模量为41(283)的结构复合材料用碳纤维丝条 页
SAE AMS 3892/1B-1992(R2005) 抗拉强度为GF400(2758), 抗拉模量为33(228)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/2B-1992(R2005) 抗拉强度为GF300(2068), 抗拉模量为50(345)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/3B-1992(R2005) 抗拉强度为GF400(2758), 抗拉模量为40(276)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/4B-1992(R2005) 抗拉强度为GF300(2068), 抗拉模量为75(517)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/5B-1992(R2005) 抗拉强度为GF220(1517), 抗拉模量为75(517)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/6A-1992(R2005) 抗拉强度为GF325(2241), 抗拉模量为57(393)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/7A-1992(R2005) 抗拉强度为GF（OX）400(2758), 抗拉模量为33(228)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/8A-1992(R2005) 抗拉强度为GF（OX）400(2758), 抗拉模量为40(276)的结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3892/9B-1992(R2005) 抗拉强度为GF500(3447), 抗拉模量为32(221)的结构复合材料用碳纤维丝条 页
SAE AMS 3892B-1992(R2005) 结构复合材料用碳纤维丝条和细纱 页
SAE AMS 3894/10A-1989(R2005) 抗拉强度为G210,000(1448),抗拉模量为20,000,000(138), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/11A-1989(R2005) 抗拉强度为G200,000(1379),抗拉模量为18,000,000(124), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/12A-1989(R2005) 抗拉强度为G200,000(1379),抗拉模量为18,000,000(124), 温度为120°C(248°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/13A-1989(R2005) 抗拉强度为G131,000(903),抗拉模量为25,000,000(172), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/14A-1989(R2005) 抗拉强度为G90,000(621),抗拉模量为40,000,000(276), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/15A-1989(R2005) 抗拉强度为G200,000(1379),抗拉模量为21,000,000(145), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/16A-1989(R2005) 抗拉强度为G200,000(1379),抗拉模量为21,000,000(145), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/17A-1994(R2005) 抗拉强度为G200(1379),抗拉模量为18.0(124), 温度为120°C(248°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/18-1990(R2005) 抗拉强度为G355,000 (2448),抗拉模量为22,000,000(152), 温度为130°C(266°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/1B-1989(R2005) 抗拉强度为G110,000(758), 抗拉模量为27,000,000(186), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/2B-1989(R2005) 抗拉强度为G150,000(1034),抗拉模量为20,000,000(138), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/3B-1989(R2005) 抗拉强度为G150,000(1034),抗拉模量为19,000,000(131), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/5B-1989(R2005) 抗拉强度为G110,000(758),抗拉模量为27,000,000(186), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/7B-1989(R2005) 抗拉强度为G90,000(621),抗拉模量为40,000,000(276), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/8B-1989(R2005) 抗拉强度为G70,000(483),抗拉模量为36,000,000(248), 温度为80°C(176°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894/9B-1989(R2005) 抗拉强度为G70,000(483),抗拉模量为36,000,000(248), 温度为175°C(347°F)的浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3894E-1990(R2005) 浸渍环氧树脂的碳纤维带材和薄板 页
SAE AMS 3895B-1994 多股相同纤维、浸渍环氧树脂的碳纤维带和牛皮纸 14 页
SAE AMS 3897/1-1988(R2005) 浸渍环氧树脂的8HS型碳纤维织物 页
SAE AMS 3897-1988(R2005) 浸渍树脂的碳纤维织物 页
SAE AMS 3898/1B-1994(R2005) 0.004英寸(0.10 mm)未打孔的羊皮纸复合带的夹层搬运材料 页
SAE AMS 3898/2B-1994(R2005) 0.0018英寸(0.046 mm)未打孔的聚乙烯薄膜复合带的夹层搬运材料 页
SAE AMS 3898/3B-1994(R2005) 0.0035英寸(0.089 mm)未打孔的聚乙烯涂覆纸复合带的夹层搬运材料 页
SAE AMS 3898/4B-1994(R2005) 0.004英寸(0.10 mm)打孔的纸复合带的夹层搬运材料 页
SAE AMS 3898/5B-1994(R2005) 0.0035英寸(0.089 mm)打孔的聚乙烯涂覆纸复合带的夹层搬运材料 页
SAE AMS 3898/6A-1994(R2005) 0.0032英寸(0.081mm)未打孔的不均匀涂覆纸复合带的夹层搬运材料 页
SAE AMS 3898/7A-1994(R2005) 0.0042英寸(0.107mm)未打孔的不均匀涂覆纸复合带的夹层搬运材料 2 页
SAE AMS 3898/8A-1994(R2005) 0.0038英寸+/-0.0004 (0.97mm +/-0.010)未打孔的不均匀涂覆纸复合带/牛皮纸的夹层搬运材料 页
SAE AMS 3898/9A-1994(R2005) 0.0050英寸+/-0.0005 (0.127mm +/-0.013)未打孔的不均匀涂覆纸复合带/牛皮纸的夹层搬运材料 页
SAE AMS 3898B-1994(R2005) 0.004英寸(0.10 mm)打孔的复合带或牛皮纸的夹层搬运材料 页
SAE AMS 3899/1B-1993(R1994) 抗拉强度为CPS 172 (1170), 抗拉模量为16 (110), 温度为120°C(248°F)浸渍聚砜树脂的碳纤维带和薄板 3 页
SAE AMS 3899/2B-1993(R1994) 抗拉强度为CPS 140 (965), 抗拉模量为27 (186), 温度为120°C(248°F)浸渍聚砜树脂的碳纤维带和薄板 4 页
SAE AMS 3899B-1993(R1998) 浸渍聚砜树脂的碳纤维带和薄板 14 页
SAE AMS 3901/10B-1998 1.2%精制的1140但尼尔(1270d tex),抗拉强度为OY 390 (2689)/23.9,抗拉模量为16.5(114)/945 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/11B-1998 1.2%精制的1420但尼尔(1580d tex),抗拉强度为OY 390 (2689)/23.8,抗拉模量为16.5(114)/950 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/12B-1998 1.2%精制的2160但尼尔(2400d tex),抗拉强度为OY 390 (2689)/21.1,抗拉模量为16.5(114)/900 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/13A-1998 0.6%精制的2450但尼尔(2720d tex),抗拉强度为OY 390 (2689)/23.0,抗拉模量为16.5(114)/875 高模量有机纤维（对芳族聚酰胺）的纱线 3 页
SAE AMS 3901/14A-1998 0.6%精制的2840但尼尔(3160d tex),抗拉强度为OY 390 (2689)/22.3,抗拉模量为16.5(114)/855 高模量有机纤维（对芳族聚酰胺）的纱线 3 页
SAE AMS 3901/15A-1998 0.6%精制的7350但尼尔(8200d tex),抗拉强度为OR 400 (2758)/22.7,抗拉模量为16.5 (114)/935 高模量有机纤维（对芳族聚酰胺）的粗纱 3 页
SAE AMS 3901/16A-1998 0.6%精制的8520但尼尔(9500d tex),抗拉强度为OR 400 (2758)/22.7,抗拉模量为16.5 (114)/935 高模量有机纤维（对芳族聚酰胺）的粗纱 3 页
SAE AMS 3901/17A-1998 1.2%精制的720但尼尔(800d tex),抗拉强度为OY 390 (2689)/23.5,抗拉模量为16.5(114)/950 高模量有机纤维（对芳族聚酰胺）的纱线 3 页
SAE AMS 3901/1C-1998 0.6%精制的195但尼尔(215d tex),抗拉强度为OY 390(2689)/22.5,抗拉模量为18(124)/1010 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/2C-1998 0.6%精制的380但尼尔(420d tex),抗拉强度为OY 390(2689)/23.8,抗拉模量为17.5(121)/950 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/3C-1998 0.6%精制的1140但尼尔(1270d tex),抗拉强度为OY 390(2689)/23.9,抗拉模量为16.5(114)/900高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/4C-1998 0.6%精制的1420但尼尔(1580d tex),抗拉强度为OY 390(2689)/23.8,抗拉模量为16.5(114)/955高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/5C-1998 0.6%精制的7100但尼尔(7900d tex),抗拉强度为OR 450 (3103)/22.5,抗拉模量为17.5 (121)/865 高模量有机纤维（对芳族聚酰胺）的粗纱 4 页
SAE AMS 3901/6C-1998 0.6%精制的4560但尼尔(5070d tex),抗拉强度为OR 500 (3447)/23.5,抗拉模量为17.5 (121)/890 高模量有机纤维（对芳族聚酰胺）的粗纱 4 页
SAE AMS 3901/7C-1998 0.6%精制的2160但尼尔(2400d tex),抗拉强度为OY 390 (2689)/20.9,抗拉模量为16.5 (114)/895 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/8B-1998 1.2%精制的195但尼尔(215d tex),抗拉强度为OY 390 (2689)/22.6,抗拉模量为18(124)/1005 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901/9B-1998 1.2%精制的380但尼尔(420d tex),抗拉强度为OY 390 (2689)/23.9,抗拉模量为17.5(121)/970 高模量有机纤维（对芳族聚酰胺）的纱线 4 页
SAE AMS 3901C-1998 高模量有机纤维（对芳族聚酰胺）的纱线和粗纱 13 页
SAE AMS 3902E-2000 结构复合材料用高模量有机纤维（对芳族聚酰胺）织物 13 页
SAE AMS 3903/1A-1988(R2005) 温度为175°C(350°F) OC式样120浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/2A-1988(R2005) 温度为175°C(350°F) OC式样181浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/3A-1988(R2005) 温度为175°C(350°F) OC式样281浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/4A-1988(R2005) 温度为175°C(350°F) OC式样328浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/5A-1988(R2005) 温度为80°C(180°F) OC式样120浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/6A-1988(R2005) 温度为80°C(180°F) OC式样181浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/7A-1988(R2005) 温度为80°C(180°F) OC式样281浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903/8A-1988(R2005) 温度为80°C(180°F) OC式样328浸渍环氧树脂的高模量有机纤维织物 页
SAE AMS 3903A-1985(R2005) 浸渍环氧树脂的高模量有机纤维（对芳族聚酰胺）织物 页
SAE AMS 3904/10A-1999 7.0%精制的15000但尼尔(16700 Dtex)中模量有机纤维（对芳族聚酰胺）粗纱 3 页
SAE AMS 3904/11A-1999 0.9%精制的15000但尼尔(16700 Dtex)中模量有机纤维（对芳族聚酰胺）粗纱 3 页
SAE AMS 3904/12A-1999 0.9%精制的4500但尼尔(5000 Dtex)中模量有机纤维（对芳族聚酰胺）粗纱 3 页
SAE AMS 3904/1B-1999 1.0%精制的200但尼尔(220 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/2B-1999 1.0%精制的400但尼尔(440 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/3B-1999 1.0%精制的1000但尼尔(1110 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/5B-1999 0.09%精制的1500但尼尔(1670 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/6A-1999 7.0%精制的1500但尼尔(1670 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/7A-1999 0％精制的1500但尼尔(1670 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904/9A-1999 0.9%精制的3000但尼尔(3300 Dtex)中模量有机纤维（对芳族聚酰胺）纱线 2 页
SAE AMS 3904B-1999 缆索、绳索和机织商品用中模量有机纤维（对芳族聚酰胺）纱线和粗纱 9 页
SAE AMS 3906/1B-1992(R1997) GL-I-36-120(248)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/2B-1992(R1997) GL-III-36-120(248)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/3B-1992(R1997) GL-I-26-150(302)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/4B-1992(R1997) GL-III-26-150(302)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/5B-1992(R1997) GL-I-36-150(302)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/6B-1992(R1997) GL-I-36-95(203)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906/7B-1992(R1997) GL-III-33-95(203)手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 7 页
SAE AMS 3906B-1992(R1997) 手工和机器敷层用浸渍环氧树脂的非机织玻璃纤维带和平薄片 12 页
SAE AMS 3907/1-1985(R2005) 5oz/平方码(170g/平方米)方平组织的芳族聚酰胺织物 页
SAE AMS 3907/2-1985(R2005) 4.3oz/平方码(145g/平方米)平织的芳族聚酰胺织物 页
SAE AMS 3907A-1994(R2005) 方平组织和平织的芳族聚酰胺织物 页
SAE AMS 3908A-1992(R2005) 热稳定的平织芳族聚酰胺织物 页
SAE AMS 3909/1A-1995(R2001) 3.0盎司/平方码(102g/平方米),350磅/英寸(61,294 N/m)芳族聚酰胺织物 3 页
SAE AMS 3909/2A-1995(R2001) 2.25盎司/平方码(76.3g/平方米),250磅/英寸(43782N/m)芳族聚酰胺织物 3 页
SAE AMS 3909/3A-1995(R2001) 2.0盎司/平方码(68g/平方米),230磅/英寸(40279N/m)（经向）和220磅/英寸(38528N/m)（纬向）芳族聚酰胺织物 3 页
SAE AMS 3909A-1995(R2001) 中模量芳族聚酰胺织物 11 页
SAE AMS 3912A-1985(R2005) 聚酰亚胺/石英织物泡沫夹层结构的雷达天线罩 页
SAE AMS 3913B-1994(R2005) 添加剂型聚酰亚胺热熔性泡沫夹层结构的雷达天线罩 页
SAE AMS 3920A-1996(R2005) 胶粘金属面夹层结构件的验收准则 页
SAE AMS 3940H-1993(R1999) 硬压的结构纤维板 8 页
SAE AMS 3970/1-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第1部分 一般要求 40 页
SAE AMS 3970/2-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第2部分 纤维、织物、树脂和胶膜的鉴定程序 17 页
SAE AMS 3970/3-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第3部分 环氧预浸渍制品的采购规范 11 页
SAE AMS 3970/4-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第4部分 胶膜胶粘剂的采购规范 9 页
SAE AMS 3970-1999 125°C(250°F)真空固化的碳纤维织物修补预浸渍制品 第0部分 简介 5 页
SAE AMS 4001H-2002 退火的含0.12Cu(1100-0)的铝薄板和板材 5 页
SAE AMS 4003G-1995 含0.12Cu(1100-H14)加工硬化的铝合金薄板和板材 6 页
SAE AMS 4004C-1995 含2.5Mg-0.25Cr(5052-H191)加工硬化的铝合金箔 6 页
SAE AMS 4006J-2005 Aluminum Alloy, Sheet and Plate 1.25Mn - 0.12Cu (3003-0) Annealed UNS A93003 页
SAE AMS 4008J-2001 含1.25Mn-0.12Cu(3003-H14)加工硬化的铝合金薄板和板材 5 页
SAE AMS 4011C-2003 退火的含99.45Al(1145-0)的铝箔和薄板 10 页
SAE AMS 4013E-2005 Aluminum Sheet, Laminated Surface Bonded 页
SAE AMS 4015K-2000 退火的含2.5Mg-0.25Cr(5052-0)的铝合金薄板和板材 5 页
SAE AMS 4016K-2000 1/4硬回火稳定的含2.5Mg-0.25Cr(5052-H32)加工硬化的铝合金薄板和板材 6 页
SAE AMS 4017K-2004 1/2硬回火稳定的含2.5Mg-0.25Cr(5052-H34)加工硬化的铝合金薄板和板材 5 页
SAE AMS 4025K-2005 退火含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-0)的铝合金薄板和板材 6 页
SAE AMS 4026L-2005 固溶热处理的和自然老化的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T4薄板,-T451板材)的铝合金薄板和板材 页
SAE AMS 4027M-2002 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr-(6061-T6薄板,-T651板材)的铝合金薄板和板材 6 页
SAE AMS 4028F-1991(R1995) 退火的含4.4Cu-0.85Si-0.80Mn-0.50Mg(2014-0)的铝合金薄板和板材 7 页
SAE AMS 4029K-2006 Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated UNS A92014 页
SAE AMS 4031F-2000 退火的6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-0)铝合金薄板和板材 6 页
SAE AMS 4035K-2003 退火的4.4Cu-1.5Mg-0.60Mn(2024-0)铝合金薄板和板材 7 页
SAE AMS 4036J-2000 铝合金薄板和板材（含4.4Cu-1.5Mg-0.60Mn单面镀铝的、2024单面镀铝的和1-1/2%单面镀铝的2024-T3薄板、1-1/2%单面镀铝的2024-T351板材） 8 页
SAE AMS 4037N-2003 固溶热处理的含4.4Cu-1.5Mg-0.60Mn(2024;-T3平薄板,-T351板材)的铝合金薄板和板材 6 页
SAE AMS 4040M-2001(R2006) 退火的含4.4Cu-1.5Mg-0.60Mn(2024镀铝的和1-1/2％镀铝的2024-0)的铝合金镀铝薄板和板材 页
SAE AMS 4041P-2000 含4.4Cu-1.5Mg-0.60Mn(2024镀铝的和1-1/2％镀铝的2024，-T3平薄板；1-1/2%镀铝的2024-T351板材)的铝合金镀铝薄板和板材 7 页
SAE AMS 4044J-2002 退火的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-0)的铝合金薄板和板材 7 页
SAE AMS 4044K-2006 Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-0) or when specified, As Fabricated (7075-F) UNS A9075 页
SAE AMS 4045H-1993(R2000) 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr 7075:(-T6薄板,-T651板材)的铝合金薄板和板材 7 页
SAE AMS 4046F-2005 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(单面镀铝的7075:-T6薄板,-T651板材)单面镀铝的铝合金薄板和板材 页
SAE AMS 4048L-2006 (R) Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0-23Cr (Alclad 7075-0) Annealed UNS A87075 页
SAE AMS 4049K-2003 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(镀铝的7075:-T6薄板,-T651板材)镀铝的铝合金薄板和板材 7 页
SAE AMS 4050H-2003 固溶热处理的、消除应力的和过老化的含6.2Zn-2.3Cu-2.2Mg-0.12Zr (7050-T7451)铝合金板材 9 页
SAE AMS 4056G-2005 Aluminum Alloy, Sheet and Plate 4.4Mg - 0.70Mn - 0.15Cr (5083-0) Annealed UNS A95083 页
SAE AMS 4062H-1999(R2006) 加工硬化的拉制铝合金无缝圆管(1100-H14) 页
SAE AMS 4063D-2005 Aluminum Alloy, Clad One Side, Sheet 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed UNS A83003 页
SAE AMS 4064E-2001(R2006) 退火的含1.25Mn-0.12Cu(No.12-0钎接金属片)双面镀层的铝合金薄板 页
SAE AMS 4065J-2006 Aluminum Alloy, Drawn Seamless Tubing 1.2Mn - 0.12Cu (3003-0) Annealed UNS A93003 页
SAE AMS 4066C-2003 固溶热处理的、拉伸消除应力的和脱溶热处理的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti-(2219-T8511)拉制铝合金无缝圆管 5 页
SAE AMS 4067H-2000(R2006) 加工硬化的含1.25Mn-0.12Cu(3003-H14)拉制铝合金无缝圆管 页
SAE AMS 4068D-2003 固溶热处理的和拉伸消除应力的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T3511)拉制铝合金无缝管 5 页
SAE AMS 4069D-2001(R2006) 退火的含2.5Mg-0.25Cr(5052-0)拉制高精度铝合金无缝圆管 页
SAE AMS 4070L-2001(R2006) 退火的含2.5Mg-0.25Cr(5052-0)拉制铝合金无缝圆管 页
SAE AMS 4071L-2002 退火的含2.5Mg-0.25Cr(5052-0)拉制铝合金无缝液压圆管 7 页
SAE AMS 4077F-2001 退火的含4.4Cu-1.5Mg-0.60Mn(单面镀层的2024-0)单面镀铝的铝合金薄板和板材 7 页
SAE AMS 4078F-2000 固溶热处理的、消除应力的和过老化的(7050-T7351)铝合金板材 6 页
SAE AMS 4079F-2002 退火的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-O)拉制高精度铝合金无缝圆管 7 页
SAE AMS 4080M-2002 退火的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-O)拉制铝合金无缝管 7 页
SAE AMS 4081H-2000(R2006) 固溶热处理的和时效处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T4)拉制铝合金无缝液压圆管 页
SAE AMS 4082N-2000(R2006) Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated UNS A96061 页
SAE AMS 4083K-2000(R2006) 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T6)拉制铝合金液压无缝圆管 页
SAE AMS 4084D-2005 固溶热和脱溶热处理含5.7Zn-2.2Mg-1.6Cu-0.22Cr(7475-T61)的铝合金薄板 5 页
SAE AMS 4085C-2006 Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged UNS A9747 页
SAE AMS 4086M-1996 固溶热处理的、冷处理的和时效处理的含4.4Cu-1.5Mg-0.60Mn(2024-T3)拉制铝合金无缝液压圆管 8 页
SAE AMS 4086N-2006 Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated, Cold Worked, and Naturally Aged 页
SAE AMS 4087G-2000 退火的(2024-0)拉制铝合金无缝管修补制品 8 页
SAE AMS 4087H-2006 Aluminum Alloy Tubing, Seamless, Drawn (2024-0) Reinstate Composition Annealed 页
SAE AMS 4088J-2000 固溶热处理的和冷处理的含4.4Cu-1.5Mg-0.60Mn(2024-T3)拉制铝合金无缝管 6 页
SAE AMS 4089D-2003 固溶热处理的、拉伸消除应力的和脱溶热处理的含1.6Cu-2.2Mg-0.22Cr-5.7Zn(7475-T7651)铝合金板材 10 页
SAE AMS 4090D-2000(R2006) 固溶热处理的、消除应力的和脱溶热处理的含5.7Zn-2.2Mg-1.6Cu-0.22Cr(7475-T651)铝合金板材 页
SAE AMS 4094C-2004 含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti镀铝的铝合金薄板和板材（固溶热处理、冷处理和脱溶热处理镀铝的2219-T81薄板；固溶热处理、消除应力和脱溶热处理镀铝的2219-T851板材） 6 页
SAE AMS 4095C-2004 含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti镀铝的铝合金薄板和板材（固溶热处理和冷处理镀铝的2219-T31薄板；固溶热处理和消除应力镀铝的2219-T351板材） 7 页
SAE AMS 4096B-2005 退火的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（镀铝的2219-0）镀铝的铝合金薄板和板材 页
SAE AMS 4100C-2000 固溶热和脱溶热处理的含5.7Zn-2.2Mg-1.6Cu-0.22Cr(镀铝的7475-T761)镀铝的铝合金薄板 8 页
SAE AMS 4101C-2001(R2006) 固溶热处理的、拉伸的和脱溶热处理的含4.4Cu-1.5Mg-0.60Mn(2124-T851)铝合金板材 页
SAE AMS 4107F-2005 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged UNS A97050 页
SAE AMS 4108F-2003 固溶热处理的、加压消除应力的和过老化的含6.2Zn-2.3Cu-2.2Mg-0.12Zr(7050-T7452)铝合金手工锻件 8 页
SAE AMS 4111C-2001 固溶热和脱溶热处理的含7.7Zn-2.5Mg-1.5Cu-0.16Cr(7049-T73)铝合金锻件 10 页
SAE AMS 4113E-2003 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T6)挤压的铝合金型材 5 页
SAE AMS 4114H-2006 Aluminum Alloy Bars and Rods, Rolled or Cold-Finished 2.5Mg - 0.25Cr (5052-F) As Fabricated UNS A95052 页
SAE AMS 4115G-2002 退火的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-0)轧制的或冷加工的铝合金棒材、杆材、线材和闪光焊接环件 6 页
SAE AMS 4116G-2002 冷加工的、固溶热处理的含1.0Mg-0.60Si-0.30Cu-0.20Cr(6061-T4)铝合金棒材、杆材、线材 6 页
SAE AMS 4117H-2001(R2006) 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061;-T6,-T651)轧制的或冷加工的铝合金棒材、杆材、线材和闪光焊接环件 页
SAE AMS 4118K-2001(R2006) 固溶热处理的含4.0Cu-0.70Mn-0.60Mg-0.50Si(2017;-T4,-T451)轧制的或冷加工的铝合金棒材、杆材、线材 页
SAE AMS 4120R-2002 轧制的或冷加工的铝合金棒材、杆材、线材（含4.4Cu-1.5Mg-0.60Mn(2024)固溶热处理的和时效处理的（T4）；固溶热处理的、冷处理的和时效处理的（T351）) 7 页
SAE AMS 4121G-1999 固溶热和脱溶热处理的含4.5Cu-0.85Si-0.80Mn-0.50Mg(2014-T6)轧制的或冷加工的铝合金棒材、杆材、线材 6 页
SAE AMS 4122J-2000 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T6)轧制的或冷加工的铝合金棒材、杆材、线材和环件 6 页
SAE AMS 4123H-2006 Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated UNS A97075 页
SAE AMS 4124D-2005 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged UNS A97075 页
SAE AMS 4125J-2001(R2006) 固溶热和脱溶热处理的含0.9Si-0.62Mg-0.25Cr(6151-T6)铝合金模锻件和轧制的或锻制的环件 页
SAE AMS 4126C-2005 Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated UNS A97075 页
SAE AMS 4127J-2005 Aluminum Alloy, Forgings and Rolled or Forged Rings (6061-T6) Solution and Precipitation Heat Treated UNS A96061 页
SAE AMS 4128C-2001 固溶热处理的和拉伸消除应力的含1.0Mg-0.60Si-0.30Cu-0.20Cr(6061-T451)轧制的或冷加工的铝合金棒材 6 页
SAE AMS 4130L-2001(R2006) 固溶热和脱溶热处理的含4.4Cu-0.85Si-0.80Mn(2025-T6)铝合金模锻件 页
SAE AMS 4131D-2005 Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged UNS A97075 页
SAE AMS 4132E-2000(R2006) 固溶热和脱溶热处理的含2.3Cu-1.6Mg-1.1Fe-1.0Ni-0.18Si-0.07Ti(2618-T61)铝合金模锻件和手工锻件、轧制的环件以及锻制的坯件 页
SAE AMS 4133D-2000(R2006) 固溶热和脱溶热处理的含4.4Cu-0.85Si-0.80Mn-0.50Mg(2014-T6)铝合金锻件和轧制的环件 页
SAE AMS 4134E-2006 Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat Treated UNS A92014 页
SAE AMS 4140H-2001(R2006) 固溶热和脱溶热处理的含4.0Cu-2.0Ni-0.68Mg(2018-T61)铝合金模锻件 页
SAE AMS 4141E-2000(R2006) 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T73)铝合金模锻件 页
SAE AMS 4143D-2001 固溶热和脱溶热处理的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T6)铝合金锻件和轧制的或锻制的环件 9 页
SAE AMS 4144F-2006 Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated (UNS A92219) 页
SAE AMS 4147C-1992(R2000) 固溶热处理的、加压消除应力的和过老化的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T7352)铝合金锻件 10 页
SAE AMS 4148D-1999 固溶热和脱溶热处理的(7175-T66)铝合金模锻件 8 页
SAE AMS 4149D-2002 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7175-T74)铝合金模锻件和手工锻件 9 页
SAE AMS 4150L-2003 固溶热和脱溶热处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T6)铝合金挤压件和环件 6 页
SAE AMS 4152L-1993(R2000) 固溶热处理的含4.4Cu-1.5Mg-0.60Mn(2024-T3)铝合金挤压件 7 页
SAE AMS 4153K-2003 固溶热和脱溶热处理的含4.5Cu-0.85Si-0.80Mn-0.50Mg(2014-T6)铝合金挤压件 7 页
SAE AMS 4154N-2003 固溶热和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T6)铝合金挤压件 7 页
SAE AMS 4156K-2003 固溶热和脱溶热处理的含0.68Mg-0.40Si(6063-T6)铝合金挤压件 5 页
SAE AMS 4157C-1994 固溶热处理的、消除应力的和过老化的含7.7Zn-2.4Mg-1.6Cu-0.16Cr(7049-T73511)铝合金挤压件 7 页
SAE AMS 4159D-2003 固溶热处理的、消除应力的、矫直的和过老化的含7.7Zn-2.4Mg-1.6Cu-0.16Cr(7049-T76511)铝合金挤压件 6 页
SAE AMS 4160G-2005 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0) Annealed UNS A96061 页
SAE AMS 4161G-2002 固溶热处理的和时效处理的含1.0Mg-0.60Si-0.28Cu-0.20Cr(6061-T4)铝合金挤压件 6 页
SAE AMS 4162D-2003 固溶热处理的、拉伸消除应力的、矫直的和脱溶热处理的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T8511)铝合金挤压件 6 页
SAE AMS 4163D-2003 固溶热处理的、拉伸消除应力的和矫直的含6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T3511)铝合金挤压件 7 页
SAE AMS 4164H-2003 拉伸消除应力的和未矫直的含4.4Cu-1.5Mg-0.60Mn(2024-T3510)铝合金挤压件 6 页
SAE AMS 4165H-2003 固溶热处理的、拉伸消除应力的和矫直的含4.4Cu-1.5Mg-0.60Mn(2024-T3511)铝合金挤压件 6 页
SAE AMS 4166F-2003 固溶热处理的和过老化的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T73)铝合金挤压件 8 页
SAE AMS 4167H-2005 固溶热处理、拉伸消除应力和过老化含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T73511)的铝合金挤压件 8 页
SAE AMS 4168J-2003 固溶热处理的、拉伸消除应力的和脱溶热处理的、未矫直的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T6510)铝合金挤压件 7 页
SAE AMS 4169K-2003 固溶热处理的、拉伸消除应力的、矫直的和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-T6511)铝合金挤压件 8 页
SAE AMS 4172E-2005 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved by Stretching UNS A96061 页
SAE AMS 4173E-2003 固溶热处理的、拉伸消除应力的、矫直的和脱溶热处理的含1.0Mg-0.60Si-0.30Cu-0.20Cr(6061-T6511)铝合金挤压件 5 页
SAE AMS 4174D-2005 Aluminum Alloy, Flash Welded Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated UNS A97075 页
SAE AMS 4177C-1995 5056,350(177)夹层结构用挠性铝合金蜂窝芯 14 页
SAE AMS 4177D-2006 Core, Flexible Honeycomb, Aluminum Alloy For Sandwich Construction 5056, 350 (177) 页
SAE AMS 4178C-1995 5052,350(177)夹层结构用处理过的挠性铝合金蜂窝芯 14 页
SAE AMS 4178D-2006 Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction 5052, 350 (177) 页
SAE AMS 4179C-2002 固溶热处理的、消除应力的和脱溶热处理的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7175-T7452)铝合金锻件 9 页
SAE AMS 4180E-1993(R2000) 最低铝含量为99.0％的(1100-H18)铝丝 5 页
SAE AMS 4181C-2003 含7.0Si-0.38Mg-0.10Ti(4008或356)的铝合金焊丝 6 页
SAE AMS 4182F-2001 退火的含5.0Mg-0.12Mn-0.12Cr(5056-0)的铝合金丝 5 页
SAE AMS 4183-2005 Aluminum Alloy, Extruded Profiles (2027-T3511) 4.4Cu 1.2Mg - 0.8Mn 0.10Zr Solution Heat Treated and Stress Relieved by Stretching UNS A92027 页
SAE AMS 4184E-2000 含10Si-4.0Cu(4145)的铝钎焊丝 5 页
SAE AMS 4185D-2000 含12Si(4047)的铝钎焊丝 6 页
SAE AMS 4186C-2004 装配式的含5.6Zn-2.5Mg-1.6Cu-0.23Cr(7075-F)轧制的或冷加工的铝合金棒材、杆材和线材 5 页
SAE AMS 4189F-2003 含4.1Si-0.20Mg(4643)的铝合金焊丝 5 页
SAE AMS 4190G-2003 含5.2Si(4043)的铝合金焊丝 5 页
SAE AMS 4191G-2003 含6.3Cu-0.30Mn-0.18Zr-0.15Ti-0.10V(2319)的铝合金焊丝 5 页
SAE AMS 4193C-2005 固溶热处理的、冷处理的和脱溶热处理的含4.4Cu-1.5Mg-0.60Mn(2024-T861)铝合金薄板和板材 5 页
SAE AMS 4195C-2002 固溶热处理的、冷处理的和脱溶热处理的含4.4Cu-1.5Mg-0.60Mn(镀铝的2024和1-1/2%镀铝的2024-T861平薄板；1-1/2%镀铝的2024-T861板材)镀铝的铝合金薄板和板材 7 页
SAE AMS 4200B-2005 固溶热处理、消除应力和脱溶热处理含7.7Zn-2.4Mg-1.6Cu-0.16Cr(7049-T7351)的铝合金板材 6 页
SAE AMS 4201E-2003 固溶热处理的、消除应力的和过老化的含6.2Zn-2.3Cu-2.2Mg-0.12Zr(7050-T7651)铝合金板材 8 页
SAE AMS 4202D-2005 固溶热处理的、拉伸消除应力的和脱溶热处理的含5.7Zn-2.2Mg-1.6Cu-0.22Cr(7475-T7351)铝合金板材 页
SAE AMS 4203C-2005 固溶热处理、消除应力和脱溶热处理的含6.2Zn-1.8Cu-2.4Mg-0.13Zr(7010-T7351)铝合金板材 页
SAE AMS 4204C-2003 固溶热处理的、消除应力的和脱溶热处理的含6.2Zn-1.8Cu-2.4Mg-0.13Zr(7010-T7651)铝合金板材 9 页
SAE AMS 4205C-2003 固溶热处理的、消除应力的和脱溶热处理的含6.2Zn-1.8Cu-2.4Mg-0.13Zr(7010-T73651)或(7010-T7451)铝合金板材 9 页
SAE AMS 4206-1999 固溶热处理的、消除应力的和过老化的(7055-T7751)含8.0Zn-2.3Cu-2.0Mg-0.16Zr铝合金板材 6 页
SAE AMS 4206A-2006 Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged UNS A97055 页
SAE AMS 4207A-1989(R1994) 固溶热和脱溶热处理的含5.7Zn-2.2Mg-1.6Cu-0.22Cr(7475-T61)镀铝的铝合金薄板 9 页
SAE AMS 4207B-2006 Aluminum Alloy Sheet, Alclad 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475- T61) Solution and Precipitation Heat Treated 页
SAE AMS 4208B-2005 Aluminum Alloy Sheet 6.0Cu - 0.40Zr - (2004-F) As Rolled UNS A92004 页
SAE AMS 4209B-2005 Aluminum Alloy Sheet, Alclad 6.0Cu - 0.40Zr - (2004-F) As Rolled UNS A82004 页
SAE AMS 4210K-2005 脱溶热处理的含5.0Si-1.2Cu-0.50Mg(355.0-T51)铝合金铸件 9 页
SAE AMS 4211A-2000 固溶热处理的、消除应力的和过老化的含6.2Zn-1.9Cu-2.1Mg-0.10Zr(7040-T7451)铝合金板材 9 页
SAE AMS 4212J-2005 (R) Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated UNS A03550 页
SAE AMS 4213-2005 Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged 页
SAE AMS 4214H-2001(R2006) 固溶热处理的和稳定处理的含5.0Si-1.2Cu-0.50Mg(355.0-T71)砂型铝合金铸件 页
SAE AMS 4215G-2001(R2006) 固溶热和脱溶热处理的含5.0Si-1.2Cu-0.50Mg(C355.0-T6)铝合金铸件 页

       SAE AMS 5868B-2006 Steel, Corrosion Resistant, Seamless and Welded Aircraft Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, 1/2 Hard Temper UNS S30400 页
SAE AMS 5869B-2002 固溶热处理的含62Ni-21.5Cr-9.0Mo-3.7Cb耐腐蚀和耐热的镍合金薄板、带材和板材 6 页
SAE AMS 5870D-2006 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 60.5Ni - 23Cr - 14Fe - 0.35Ti - 1.4Al Solution Heat Treated UNS N06601 页
SAE AMS 5871D-2001(R2006) 固溶热处理的含21Cr-32.5Ni-0.38Ti-0.38Al-45Fe耐腐蚀和耐热的合金薄板、带材和板材 页
SAE AMS 5872D-2000 自耗电极或真空感应熔炼、固溶热处理的含48Ni-20Cr-20Co-5.9Mo-2.2Ti-0.45Al耐腐蚀和耐热的镍合金薄板、带材和板材 6 页
SAE AMS 5872E-2006 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 48Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted Solution Heat Treated UNS N07263 页
SAE AMS 5873D-2002 自耗电极熔炼、固溶热处理的含65Ni-15.8Cr-15.2Mo-0.30AI-0.05La耐腐蚀和耐热的镍合金薄板、带材和板材 6 页
SAE AMS 5874B-1993(R2000) 固溶热处理的含29Fe-22Cr-21Ni-18.5Co-3.2Mo-2.8W-0.78Ta-0.30Al-0.05Zr-0.05La-0.20N耐腐蚀和耐热的合金薄板、带材和板材 8 页
SAE AMS 5875C-2002 真空感应加真空自耗电极熔炼、固溶热处理、冷轧和老化的含20Cr-15Ni-40Co-7.0Mo-16Fe耐腐蚀和耐热的钴合金带材 7 页
SAE AMS 5876C-2003 真空感应加自耗电极熔炼、固溶热处理和冷轧的含20Cr-15Ni-40Co-7.0Mo-16Fe耐腐蚀和耐热的钴合金带材 8 页
SAE AMS 5877B-2002 固溶热处理的含29Fe-22Cr-21Ni-18.5Co-3.2Mo-2.8W-0.78Ta-0.30Al-0.05La-0.20N耐腐蚀和耐热的铁合金棒材、锻件和环件 8 页
SAE AMS 5878B-2002 固溶热处理的含59Ni-22Cr-2Mo-14W-0.35AI-0.03La耐腐蚀和耐热的镍合金薄板、带材和板材 7 页
SAE AMS 5879C-2002 冷轧和退火的含62Ni-21.5Cr-9.0Mo-3.7Cb耐腐蚀和耐热的镍合金薄板、带材和箔 6 页
SAE AMS 5880C-2006 Steel, Corrosion Resistant, Bars, Wire, Forgings, and Wire 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) for Bearing Applications UNS S44004 页
SAE AMS 5884B-2001(R2006) 固溶热处理、脱溶淬硬、多次熔炼、高温低膨胀的含42Fe-37.5Ni-14Co-4.8Cb-1.6Ti铁-镍合金棒材、锻件和环件 页
SAE AMS 5886B-2003 自耗电极或真空感应熔炼、2100°F(1149°C)固溶热处理的含50Ni-20Cr-20Co-5.8Mo-2.2Ti-0.45Al耐腐蚀和耐热的合金棒材、锻件和环件 8 页
SAE AMS 5887B-2001(R2006) 自耗电极或真空感应熔炼、退火的含54Ni-22Cr-12.5Co-9.0Mo-1.2Al耐腐蚀和耐热的镍合金棒材、锻件和环件 页
SAE AMS 5888B-2001(R2006) 退火的含54Ni-22Cr-12.5Co-9.0Mo-1.2Al耐腐蚀和耐热的镍合金板材 页
SAE AMS 5889B-2001(R2006) 自耗电极或真空感应熔炼、退火的含54Ni-22Cr-12.5Co-9.0Mo-1.2Al耐腐蚀和耐热的镍合金薄板和带材 页
SAE AMS 5890D-2001(R2006) 消除应力、氧化钍分散增强、耐腐蚀和耐热的镍棒材、锻件和挤压件 页
SAE AMS 5891A-2000 退火的含60Ni-22Cr-2.0Mo-14W-0.35Al-0.03La耐腐蚀和耐热的镍合金棒材、锻件和环件 7 页
SAE AMS 5892A-2000(R2006) 固溶热处理、脱溶淬硬、多次熔炼、高温低膨胀的含42Fe-37.5Ni-14Co-4.8(Cb+Ta)-1.6Ti合金薄板和带材 页
SAE AMS 5893B-2006 Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8(Cb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion UNS N19909 页
SAE AMS 5894B-2004 固溶热处理的含60Co-28Cr-4.5W-1.15C钴合金棒材、薄板和板材 5 页
SAE AMS 5895C-2000 含15Cr-25.5Ni-1.2Mo-2.1Ti-0.006B-0.30V自耗电极熔炼、1750°F(954°C)固溶热处理、脱溶淬硬的耐腐蚀和耐热焊接级钢棒、钢丝、锻件、钢管和环件 9 页
SAE AMS 5895D-2006 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1750 Degrees F (954 Degrees C) Solution Heat Treated, Welding Grade Precipitation Hardenable UNS S66 页
SAE AMS 5896A-2000(R2006) Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti (SAE 30321) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper UNS S32100 页
SAE AMS 5897B-2006 Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 11Ni - 0.80Cb (SAE 30347) Solution Heat Treated and Cold Drawn, One- Eighth Hard Temper UNS S34700 页
SAE AMS 5898A-2001(R2006) 在压力下自耗电极熔炼的含15.2Cr-1.0Mo-0.40N-(0.28-0.34C)耐腐蚀的钢棒、钢丝和锻件 页
SAE AMS 5899A-2002 热等压粉末冶金制造的含17Cr-0.52Mo(0.95-1.20C)耐腐蚀的钢棒、钢丝和锻件 7 页
SAE AMS 5900B-2000 含14Cr-2.1Mo-0.30Cb-1.0V(1.05-1.15C)两次真空熔炼、轴承用航空优质耐腐蚀的钢棒、锻件和钢管 10 页
SAE AMS 5901B-2001(R2006) Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 8Ni (SAE 30301) Solution Heat Treated UNS S30100 页
SAE AMS 5902B-2001(R2006) 抗拉强度为175ksi(1207MPa)、3/4硬质冷轧的含18Cr-8Ni耐腐蚀的钢薄板和带材(SAE 30301) 页
SAE AMS 5903A-2000 抗拉强度为125ksi(862MPa)、1/4硬质冷轧的含18Cr-9.0Ni耐腐蚀的钢薄板、带材和板材(SAE 30302) 7 页
SAE AMS 5904A-2000 抗拉强度为150ksi(1034MPa)、1/2硬质冷轧的含18Cr-9.0Ni耐腐蚀的钢薄板和带材(SAE 30302) 7 页
SAE AMS 5905A-2000 抗拉强度为175ksi(1207MPa)、3/4硬质冷轧的含18Cr-9.0Ni耐腐蚀的钢薄板和带材(SAE 30302) 7 页
SAE AMS 5906A-2000 抗拉强度为185ksi(1276MPa)、全硬质冷轧的含18Cr-9.0Ni耐腐蚀的钢薄板和带材(SAE 30302) 6 页
SAE AMS 5906B-2006 Steel, Corrosion Resistant, Sheet Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength UNS S30200 页
SAE AMS 5907A-2000 抗拉强度为125ksi(862MPa)、1/4硬质冷轧的含17Cr-12Ni-2.5Mo耐腐蚀和耐热的钢薄板、带材和板材(SAE 30316) 6 页
SAE AMS 5907B-2006 Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (SAE 30316) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength UNS S31600 页
SAE AMS 5910A-2000 抗拉强度为125ksi(862MPa)、冷轧的含19Cr-9.2Ni耐腐蚀的钢薄板、带材和板材(SAE 30304) 6 页
SAE AMS 5910B-2006 Steel, Corrosion Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength UNS S30400 页
SAE AMS 5911A-2001(R2006) Steel, Corrosion Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength UNS S30400 页
SAE AMS 5912A-2001(R2006) Steel, Corrosion Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength UNS S30400 页
SAE AMS 5913A-2001(R2006) Steel, Corrosion Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength UNS S30400 页
SAE AMS 5914A-2001 自耗电极或真空感应熔炼、冷精轧、固溶热处理的含52.5Ni-19Cr-3.0Mo-5.0Cb-0.90Ti-0.50Al-18Fe耐腐蚀和耐热的镍合金薄板、带材和箔 10 页
SAE AMS 5916-2001(R2006) 退火的含35Fe-24Cr-37Ni-0.65Cb-0.2N耐腐蚀和耐热的合金薄板、带材和板材 页
SAE AMS 5919-2003 真空感应加真空自耗电极熔炼、固溶热处理和加工硬化、改进强度的含19Cr-36Co-25Ni-7.0Mo-0.50Cb-2.9Ti-0.20Al-9.0Fe耐腐蚀和耐热的钴-镍合金圆棒 7 页
SAE AMS 5920-2003 真空感应加真空自耗电极熔炼、固溶热处理、加工硬化和老化、改进强度的含19Cr-36Co-25Ni-7.0Mo-0.50Cb-2.9Ti-0.20Al-9.0Fe耐腐蚀和耐热的钴-镍合金圆棒 6 页
SAE AMS 5925-1999 电渣再熔炼的含15.5Cr-1.8Mo-0.20N(0.37-0.45C)耐腐蚀的钢棒、钢丝和锻件 8 页
SAE AMS 5925A-2006 Steel, Corrosion-Resistant, Bars, Wire, and Forgings 15.5Cr - 1.8Mo - 0.20N (0.37 - 0.45C) Electroslag Remelted UNS S42025 页
SAE AMS 5930A-2005 Steel, Corrosion-Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted Composition similar to UNS S42670 页
SAE AMS 5931A-2005 Steel, Bars, Wire, Forgings, Extrusions, Tubing, and Rings Wear, Galling, and Corrosion-Resistant 5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14N Solution Heat Treated Composition similar to UNS S20161 页
SAE AMS 5932B-2005 含14.5Cr-2.3Ni-12.5Co-4.0Mo-0.60V-0.03Cb(Nb)渗碳、两次真空熔炼的航空优质耐腐蚀和耐热的钢棒、锻件和钢管 页
SAE AMS 5933-1999 真空感应加真空自耗电极再熔炼的含12.5Cr-1.0Ni-15.5Co-2.0Mo耐腐蚀的钢棒和锻件 7 页
SAE AMS 5934-2004 真空感应加自耗电极熔炼、固溶热处理、脱溶淬硬的含13Cr-8.0Ni-2.2Mo-1.1Al耐腐蚀、有极高韧性的钢棒、钢丝、锻件、环件和挤压件 11 页
SAE AMS 5936B-2002 真空感应加真空自耗电极熔炼、固溶热处理、脱溶淬硬的含12Cr-11Ni-1.7Ti-1Mo耐腐蚀的钢棒、钢丝和锻件 10 页
SAE AMS 5940A-2005 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation-Resistant, Low Expansion Solution Heat Treated, Precipitation-Hardenable Composition si 页
SAE AMS 5950A-2002 真空感应和自耗电极熔炼、固溶热处理、脱溶淬硬的含52.5Ni-19Cr-3.0Mo-5.0Cb-0.90Ti-0.50AI-18Fe耐腐蚀和耐热的镍合金薄板和带材 10 页
SAE AMS 5961A-2002 弹性回火、冷轧制的含74Ni-15.5Cr-8.0Fe耐腐蚀和耐热的镍合金线材 7 页
SAE AMS 5962A-2003 1775°F(968°C)固溶热处理和加工硬化、脱溶淬硬的、自耗电极或真空感应熔炼的含52.5Ni-19Cr-3.0Mo-5.1Cb-0.90Ti-0.50Al-18Fe耐腐蚀和耐热的镍合金圆棒和线材 7 页
SAE AMS 5966A-2003 自耗电极或真空感应熔炼的含50Ni-20Cr-20Co-5.9Mo-2.2Ti-0.45AI耐腐蚀和耐热的镍合金焊丝 6 页
SAE AMS 6250K-2006 Steel Bars, Forgings, and Tubing 1.5Cr - 3.5Ni (0.07 - 0.13 C) (SAE 3310) UNS K44910 页
SAE AMS 6255C-2002 两次真空熔炼的含1.1Si-1.45Cr-1.0Mo-0.08Al(0.16-0.22C)钢棒、锻件和钢管 7 页
SAE AMS 6257C-2002 自耗电极真空再熔炼、正火和回火的含1.6Si-0.82Cr-1.8Ni-0.40Mo-0.08V(0.40-0.44C)的钢棒、锻件和钢管 11 页
SAE AMS 6260N-2002 含1.2Cr-3.2Ni-0.12Mo(0.07-0.13C)的钢棒、锻件和钢管(SAE 9310) 7 页
SAE AMS 6263K-2006 Steel Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (SAE 9315) UNS G93150 页
SAE AMS 6264J-2001(R2006) 含1.2Cr-3.2Ni-0.12Mo(0.14-0.20C)的渗碳级钢棒、锻件和钢管(SAE 9317) 页
SAE AMS 6265K-2002 真空自耗电极再熔炼的含1.2Cr-3.25Ni-0.12Mo(0.07-0.13C)的钢棒、锻件和钢管(SAE 9310) 8 页
SAE AMS 6267F-2002 电渣再熔炼或自耗电极真空再熔炼的含1.2Cr-3.25Ni-0.12Mo(0.07-0.13C)的钢棒、锻件和钢管(SAE 9310) 7 页
SAE AMS 6270N-2001(R2006) 含0.50Cr-0.55Ni-0.20Mo(0.13-0.18C)的钢棒、锻件和钢管(SAE 8615) 页
SAE AMS 6272K-2001(R2006) 含0.50Cr-0.55Ni-0.20Mo(0.15-0.20C)的钢棒、锻件和钢管(SAE 8617) 页
SAE AMS 6274N-2006 Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C)(SAE 8620) UNS G86200 页
SAE AMS 6276J-2006 Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Consumable Electrode Vacuum Melted UNS G86200 页
SAE AMS 6277F-2006 Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted UNS G86200 页
SAE AMS 6278C-2006 Steel, Bars, Forgings, and Tubing 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted UNS K91231 页
SAE AMS 6280J-2003 含0.50Cr-0.55Ni-0.20Mo(0.28-0.33C)的钢棒、锻件和环件(SAE 8630) 8 页
SAE AMS 6281J-2006 Steel, Mechanical Tubing 0.50Cr - 0.55Ni- 0.20Mo (0.28 - 0.33C) (SAE 8630) UNS G86300 页
SAE AMS 6282J-2006 Steel Tubing, Mechanical 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) UNS G87350 页
SAE AMS 6290H-2005 含1.8Ni-0.25Mo(0.11-0.17C)的渗碳钢棒和锻件(SAE 4615) 页
SAE AMS 6292G-2001(R2006) 含1.8Ni-0.25Mo(0.15-0.20C)的渗碳钢棒和锻件(SAE 4617) 页
SAE AMS 6294G-2001(R2006) 含1.8Ni-0.25Mo(0.17-0.22C)的渗碳钢棒和锻件(SAE 4620) 页
SAE AMS 6299E-2005 含0.50Cr-1.8Ni-0.25Mo(0.17-0.23C)的钢棒、锻件和钢管(SAE 4320H) 页
SAE AMS 6300E-2006 Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037) UNS G40370 页
SAE AMS 6302G-2004 含0.65Si-1.25Cr-0.50Mo-0.25V(0.28-0.33C)耐热的低合金钢棒、锻件和钢管 9 页
SAE AMS 6303F-2003 含0.65Si-1.25Cr-0.50Mo-0.85V(0.25-0.30C)耐热的低合金钢棒和锻件 7 页
SAE AMS 6304J-2004 含0.95Cr-0.55Mo-0.30V(0.40-0.50C)耐热的低合金钢棒、锻件和钢管 8 页
SAE AMS 6305D-2002 真空电弧再熔炼的含0.95Cr-0.55Mo-0.30V(0.40-0.50C)耐热的钢棒、锻件和钢管 9 页
SAE AMS 6308C-2002 真空电弧或电渣再熔炼的含0.90Si-1.0Cr-2.0Ni-3.2Mo-2.0Cu-0.10V(0.07-0.13C)的钢棒和锻件 7 页
SAE AMS 6312G-2006 Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4640) UNS K22440 页
SAE AMS 6317G-2003 抗拉强度为125ksi(862MPa)、热处理的含1.8Ni-0.25Mo(0.38-0.43C)的钢棒和锻件(SAE 4640) 8 页
SAE AMS 6320L-2003 含0.50Cr-0.55Ni-0.25Mo(0.33-0.38C)的钢棒、锻件和环件(SAE 8735) 8 页
SAE AMS 6322N-2005 Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) UNS G87400 页
SAE AMS 6323K-2002 含0.50Cr-0.55Ni-0.25Mo(0.38-0.43C)的机制钢管(SAE 8740) 7 页
SAE AMS 6324G-2004 含0.65Cr-0.70Ni-0.25Mo(0.38-0.43C)的钢棒、锻件和钢管(SAE 8740修改的) 8 页
SAE AMS 6325H-2004 抗拉强度为105ksi(724MPa)、热处理的含0.50Cr-0.55Ni-0.25Mo(0.38-0.43C)的钢棒和锻件(SAE 8740) 7 页
SAE AMS 6327H-2003 抗拉强度为125ksi(862MPa)、热处理的含0.50Cr-0.55Ni-0.25Mo(0.38-0.43C)的钢棒和锻件(SAE 8740) 8 页
SAE AMS 6328K-2003 含0.50Cr-0.55Ni-0.25Mo(0.48-0.53C)的钢棒、锻件和钢管(SAE 8750) 8 页
SAE AMS 6330F-2001(R2006) 含0.65Cr-1.25Ni(0.33-0.38C)的钢棒、锻件和钢管 页
SAE AMS 6340-2006 Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) Consumable Electrode Vacuum Remelted UNS K23080 页
SAE AMS 6345A-2002 正火或其他热处理的含0.95Cr-0.20Mo(0.28-0.33C)的钢薄板、带材和板材(SAE 4130) 8 页
SAE AMS 6346A-2005 Steel Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Hardened and Tempered, 125 Ksi (862 MPa) Tensile Strength UNS G41300 页
SAE AMS 6348C-2004 正火的含0.95Cr-0.20Mo(0.28-0.33C)的钢棒(SAE 4130) 7 页
SAE AMS 6349C-2003 正火的含0.95Cr-0.20Mo(0.38-0.43C)的钢棒(SAE 4140) 8 页
SAE AMS 6350K-2006 Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) UNS G41300 页
SAE AMS 6351G-2006 Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized UNS G41300 页
SAE AMS 6352H-2004 含0.95Cr-0.20Mo(0.33-0.38C)的钢薄板、带材和板材(SAE 4135) 6 页
SAE AMS 6354E-2001 含0.75Si-0.62Cr-0.20Mo-0.10Zr(0.10-0.17C)的钢薄板、带材和板材 6 页
SAE AMS 6356E-2001 含0.95Cr-0.20Mo(0.30-0.35C)的钢薄板、带材和板材 7 页
SAE AMS 6356F-2006 Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo - (0.30 - 0.35C)(SAE 4132) UNS G41300 页
SAE AMS 6357J-2006 Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) Composition Similar to UNS G87350 页
SAE AMS 6358H-2006 Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) UNS G87400 页
SAE AMS 6359G-2003 含0.80Cr-1.8Ni-0.25Mo(0.38-0.43C)的钢薄板、带材和板材(SAE 4340) 7 页
SAE AMS 6360L-2005 正火或消除应力的、含0.95Cr-0.20Mo(0.28-0.33C)的无缝钢管(SAE 4130) 页
SAE AMS 6361E-2005 抗拉强度为125ksi(862MPa)、含0.95Cr-0.20Mo(0.28-0.33C)的无缝钢管(SAE 4130) 页
SAE AMS 6362F-2005 抗拉强度为150ksi(1034MPa)、含0.95Cr-0.20Mo(0.28-0.33C)的无缝钢管(SAE 4130) 页
SAE AMS 6365J-2001(R2006) 正火或消除应力的含0.95Cr-0.20Mo(0.33-0.38C)的无缝钢管(SAE 4135) 页
SAE AMS 6370M-2006 Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) UNS G41300 页
SAE AMS 6371J-2003 含0.95Cr-0.20Mo(0.28-0.33C)的机制钢管(SAE 4130) 6 页
SAE AMS 6372K-2004 含0.95Cr-0.20Mo(0.33-0.38C)的机制钢管(SAE 4135) 6 页
SAE AMS 6373G-2006 Steel, Welded Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) UNS G41300 页
SAE AMS 6374C-2006 Steel Tubing, Seam-Free, Round 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95.0 ksi (655 MPa) Tensile Strength UNS G41300 页
SAE AMS 6375C-2006 Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, Environment Controlled Packaging UNS G86200 页
SAE AMS 6378F-2001(R2006) Steel Bars 1.0Cr - 0.20Mo - 0.45Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield Strength Free Machining UNS K11542 页
SAE AMS 6381G-2003 含0.95Cr-0.20Mo(0.38-0.43C)的机制钢管(SAE 4140) 7 页
SAE AMS 6382M-2001(R2006) 退火的含0.95Cr-0.20Mo(0.38-0.43C)的钢棒、锻件和环件(SAE 4140) 页
SAE AMS 6385F-2003 含0.65Si-1.25Cr-0.50Mo-0.25V(0.27-0.33C)耐热的低合金钢薄板、带材和板材 8 页
SAE AMS 6387-2003 表面粘结的层压碳钢薄板 8 页
SAE AMS 6395E-2000 含0.95Cr-0.20Mo(0.38-0.43C)的钢薄板、带材和板材(SAE 4140) 8 页
SAE AMS 6395F-2006 Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) UNS G41400 页
SAE AMS 6396D-2006 Steel Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed UNS K22950 页
SAE AMS 6407G-2003 含1.2Cr-2.0Ni-0.45Mo(0.27-0.33C)的钢棒、锻件和钢管 8 页
SAE AMS 6408B-2004 电渣再熔炼或自耗电极真空电弧再熔炼、退火的含5.25Cr-1.5Mo-1.0V(0.35-0.45C)的钢热加工工具、钢棒和锻件 9 页
SAE AMS 6409B-2002 含0.80Cr-1.8Ni-0.25Mo(0.38-0.43C)专用航空级净度、正火和回火的钢棒、锻件和钢管(SAE 4340) 10 页
SAE AMS 6411F-2006 Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) Consumable Electrode Remelted UNS K23080 页
SAE AMS 6412L-2001(R2006) 含0.80Cr-1.8Ni-0.25Mo(0.35-0.40C)的钢棒和锻件(SAE 4337) 页
SAE AMS 6413K-2006 Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4337) UNS G43370 页
SAE AMS 6414J-2003 真空自耗电极再熔炼的含0.80Cr-1.8Ni-0.25Mo(0.38-0.43C)的钢棒、锻件和钢管(SAE 4340) 11 页
SAE AMS 6415R-2003 含0.80Cr-1.8Ni-0.25Mo(0.38-0.43C)的钢棒、锻件和钢管(SAE 4340) 9 页
SAE AMS 6417F-2002 自耗电极真空再熔炼的含1.6Si-0.82Cr-1.8Ni-0.40Mo-0.08V(0.38-0.43C)的钢棒、锻件和钢管 10 页
SAE AMS 6417F-2002(R2006) 自耗电极真空再熔炼的含1.6Si-0.82Cr-1.8Ni-0.40Mo-0.08V(0.38-0.43C)的钢棒、锻件和钢管 页
SAE AMS 6419F-2002 自耗电极真空再熔炼的含1.6Si-0.82Cr-1.8Ni-0.40Mo-0.08V(0.40-0.45C)的钢棒、锻件和钢管 10 页
SAE AMS 6419F-2002(R2006) 自耗电极真空再熔炼的含1.6Si-0.82Cr-1.8Ni-0.40Mo-0.08V(0.40-0.45C)的钢棒、锻件和钢管 页
SAE AMS 6421E-2006 Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37) 页
SAE AMS 6422H-2006 Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40) UNS K11940 页
SAE AMS 6423E-2004 含0.92Cr-0.75Ni-0.52Mo-0.003B-0.04V(0.40-0.46C)的钢棒、锻件和钢管 9 页
SAE AMS 6424D-2003 含0.80Cr-1.8Ni-0.25Mo(0.49-0.55C)的钢棒、锻件和钢管 8 页
SAE AMS 6425B-2002 自耗电极真空熔炼的含1.4Mn-1.5Si-0.30Cr-1.8Ni-0.40Mo(0.23-0.28C)的钢棒、锻件和钢管 11 页
SAE AMS 6425B-2002(R2006) 自耗电极真空熔炼的含1.4Mn-1.5Si-0.30Cr-1.8Ni-0.40Mo(0.23-0.28C)的钢棒、锻件和钢管 页
SAE AMS 6427J-2003 含0.88Cr-1.8Ni-0.42Mo-0.08V(0.25-0.33C)的钢棒、锻件和钢管 9 页
SAE AMS 6428G-2003 含0.80Cr-1.8Ni-0.35Mo-0.20V(0.32-0.38C)的钢棒、锻件和钢管 9 页
SAE AMS 6429F-2005 Steel Bars, Forgings, Tubing, and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) Consumable Electrode Vacuum Melted Composition similar to UNS K33517 页
SAE AMS 6430F-2002 含0.75Mn-0.78Cr-1.8Ni-0.35Mo-0.20V(0.32-0.38C)的钢棒、锻件、钢管和环件 10 页
SAE AMS 6431L-2002 真空自耗电极熔炼的含1.05Cr-0.55Ni-1.0Mo-0.11V(0.45-0.50C)的钢棒、锻件和钢管 11 页
SAE AMS 6433E-2001(R2006) 含0.75Mn-0.78Cr-1.8Ni-0.35Mo-0.20V(0.33-0.38C)的钢薄板、带材和板材 页
SAE AMS 6434E-2001 含0.78Cr-1.8Ni-0.35Mo-0.20V(0.33-0.38C)的钢薄板、带材和板材 7 页
SAE AMS 6435D-2001 真空自耗电极熔炼、退火的含0.75Mn-0.78Cr-1.8Ni-0.35Mo-0.20V(0.33-0.38C)的钢薄板、带材和板材 8 页
SAE AMS 6437F-2001 含5.0Cr-1.3Mo-0.50V(0.38-0.43C)的钢薄板、带材和板材 7 页
SAE AMS 6437G-2006 Steel, Sheet, Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) UNS T20811 页
SAE AMS 6439C-2006 Steel Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC) Consumable Electrode Vacuum Melted, Annealed UNS K24728 页
SAE AMS 6440M-2005 Steel, Bars, Forgings, and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) For Bearing Applications Composition similar to UNS G52986 页
SAE AMS 6444J-2001 自耗电极真空熔炼的含1.45Cr(0.98-1.10C)的优质航空钢棒、锻件和钢管(SAE 52100) 9 页
SAE AMS 6444K-2006 Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted UNS G52986 页
SAE AMS 6447F-2006 Steel, Bars, Forgings, and Tubing 1.4Cr (0.98 - 1.10C) (SAE 52100) Electroslag Remelted UNS G52986 页
SAE AMS 6448K-2005 Steel, Bars, Forgings, and Tubing 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) UNS G61500 页
SAE AMS 6450H-2003 退火和冷拉制的含0.95Cr-0.22V(0.48-0.53C)的弹簧钢丝和弹簧(SAE 6150) 7 页
SAE AMS 6452C-2002 真空熔炼、环境受控包装的含0.95Cr-0.20Mo(0.38-0.43C)的钢焊丝 7 页
SAE AMS 6453B-2002 真空熔炼、环境受控包装的含0.30Cr-1.8Ni-0.40Mo-(0.23-0.28C)的钢焊丝 6 页
SAE AMS 6454C-2001 自耗电极熔炼的含1.8Ni-0.80Cr-0.25Mo(0.38-0.43C)的钢薄板、带材和板材(SAE 4340) 8 页
SAE AMS 6455H-2001 含0.95Cr-0.22V(0.48-0.53C)的钢薄板、带材和板材(SAE 6150) 7 页
SAE AMS 6456C-2002 真空熔炼、环境受控包装的含0.80Cr-1.8Ni-0.25Mo(0.35-0.40C)的钢焊丝(SAE 4340 修改的) 8 页
SAE AMS 6457C-2001(R2006) 真空熔炼、环境受控包装的含0.95Cr-0.20Mo(0.28-0.33C)的钢焊丝(SAE 4130) 页
SAE AMS 6458H-2001(R2006) 真空熔炼、环境受控包装的含0.65Si-1.25Cr-0.50Mo-0.30V(0.28-0.33C)的钢焊丝 页
SAE AMS 6459D-2002 真空熔炼的含1.0Cr-1.0Mo-0.12V(0.18-0.23C)的钢焊丝 7 页
SAE AMS 6460F-2006 Wire, Steel Welding 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) UNS K11365 页
SAE AMS 6461J-2001(R2006) 真空熔炼、环境受控包装的含0.95Cr-0.20V(0.28-0.33C)的钢焊丝(SAE 6130) 页
SAE AMS 6462H-2002 含0.95Cr-0.20V(0.28-0.33C)的钢焊丝(SAE 6130) 7 页
SAE AMS 6463C-2000(R2004) 真空熔炼、环境受控包装的含18.5Ni-8.5Co-5.2Mo-0.72Ti-0.10Al的钢焊丝(SAE 6130) 7 页
SAE AMS 6465C-2000(R2004) 真空熔炼、环境受控包装的含2.0Cr-10Ni-8.0Co-1.0Mo-0.02Al-0.06V(0.10-0.14C)的钢焊丝 7 页
SAE AMS 6466E-1997(R2006) Steel, Corrosion Resistant, Welding Wire 5.2Cr - 0.55Mo UNS S50280 页
SAE AMS 6468D-2003 真空熔炼、环境受控包装的含1.0Cr-10Ni-3.8Co-0.45Mo-0.08V(0.14-0.17C)的钢焊丝 7 页
SAE AMS 6469C-2003 真空熔炼、环境受控包装的含1.75Mn-0.78Cr-2.8Ni-0.85Mo-(0.09-0.12C)的钢焊丝 8 页
SAE AMS 6470L-2005 Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) UNS K24065 页
SAE AMS 6471F-2005 Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) Consumable Electrode Vacuum Melted UNS K24065 页
SAE AMS 6472D-2001(R2006) 抗拉强度为112ksi(772MPa)、调质的含1.6Cr-0.35Mo-1.1Al(0.38-0.43C)的渗氮钢棒和锻件 页
SAE AMS 6474-1996(R2002) 淬硬钢和耐腐蚀钢锻件热处理的、加工的部分的性能：快速横向抗拉强度和断裂韧度 23 页
SAE AMS 6475H-2004 含1.1Cr-3.5Ni-0.25Mo-1.2AI(0.21-0.26C)的渗氮钢棒、锻件和钢管 9 页
SAE AMS 6476C-2006 Steel, Bars, Forgings, and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) UNS K19526 页
SAE AMS 6477A-2001(R2006) 轴承用含0.80Cr(0.90-1.03C)的钢棒、锻件和钢管 页
SAE AMS 6479A-2002 含1.45Cr(0.98-1.10C)专用航空级净度的钢棒、锻件和钢管(SAE 52100) 9 页
SAE AMS 6481A-2003 两次真空熔炼的含3Cr-1Mo-0.2V-(0.29-0.36C)轴承用优质航空渗氮钢棒、锻件和钢管 9 页
SAE AMS 6484B-2002 含0.80Cr-1.8Ni-0.25Mo(0.38-0.43C)正火和回火的钢棒、锻件和钢管(SAE 4340) 9 页
SAE AMS 6487J-2002 自耗电极真空熔炼的含5.0Cr-1.3Mo-0.50V(0.38-0.43C)的钢棒和锻件(H-11) 10 页
SAE AMS 6490F-2005 Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted Composition similar to UNS T11350 页
SAE AMS 6491C-2005 Steel Bars, Forgings, and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted UNS T11350 页
SAE AMS 6501C-2002 真空感应熔炼、环境受控包装的含8Ni-8.0Co-4.9Mo-0.40Ti-0.10Al的马氏体钢焊丝 7 页
SAE AMS 6512E-2005 自耗电极真空熔炼、退火的含18Ni-7.8Co-4.9Mo-0.40Ti-0.10A1的钢棒、锻件、钢管和环件 页
SAE AMS 6514F-2005 退火、自耗电极真空熔炼、含18.5Ni-9.0Co-4.9Mo-0.65Ti-0.10Al的马氏体钢棒、锻件、钢管和环件 页
SAE AMS 6519B-2001(R2006) Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Double Vacuum Melted, Annealed 页
SAE AMS 6523E-2001 含0.75Cr-9.0Ni-4.5Co-1.0Mo-0.09V(0.17-0.23C)真空自耗电极熔炼、退火的钢薄板、带材和板材 9 页
SAE AMS 6525C-2002 含0.75Cr-9.0Ni-4.5Co-1.0Mo-0.09V(0.17-0.23C)自耗电极真空熔炼的钢棒、锻件、钢管和环件 12 页
SAE AMS 6526E-2002 含1.0Cr-7.5Ni-4.5Co-1.0Mo-0.09V(0.29-0.34C)自耗电极真空熔炼、退火的钢棒、锻件、钢管和环件 12 页
SAE AMS 6527D-2005 含2.0Cr-10Ni-14Co-1.0Mo(0.15-0.19C)真空熔炼、正火和过老化的钢棒和锻件 页
SAE AMS 6528B-2002 含0.95Cr-0.20Mo(0.28-0.33C)专用航空级净度、正火的钢棒(SAE 4130) 8 页
SAE AMS 6529B-2002 含0.95Cr-0.20Mo(0.38-0.43C)专用航空级净度、正火的钢棒(SAE 4140) 8 页
SAE AMS 6532D-2006 Steel, Bars and Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitation Hardenable UNS K92580 页
SAE AMS 6543C-2001 两次真空熔炼、固溶热处理的含2.0Cr-10Ni-8.0Co-1.0Mo(0.10-0.14C)的马氏体钢棒和锻件 8 页
SAE AMS 6543D-2006 Steel, Bars and Forgings, Maraging 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C)(HY-180) Double Vacuum Melted, Solution Heat Treated UNS K91970 页
SAE AMS 6544C-2005 Maraging Steel, Plate 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum Melted, Solution Heat Treated UNS K91971 页
SAE AMS 6900-2004 退火的含5Al-2.5Sn的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6901-2004 退火、超低填隙的含5Al-2.5Sn的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6905-2004 双重退火的含6.0Al-2.0Sn-4.0Zr-2.0Mo的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6906-2004 固溶热处理和老化的含6.0Al-2.0Sn-4.0Zr-6.0Mo的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6907-2004 双重退火的含6.0Al-2.0Sn-4.0Zr-6.0Mo的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6910-2004 双重退火的含8Al-1Mo-1V的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6915-2004 退火的含7.0Al-4.0Mo的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6920A-2006 Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated UNS R58640 页
SAE AMS 6921-2004 固溶热处理和老化的含3Al-8V-6Cr-4Mo-4Zr的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6925-2004 固溶热处理的含13V-11Cr-3Al的钛合金棒材、锻件和锻坯 9 页
SAE AMS 6926-2004 固溶热处理和老化的含13V-11Cr-3Al的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6930A-2006 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged UNS R56400 页
SAE AMS 6931-2004 退火的含6.0Al-4.0V的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6932-2004 退火、超低填隙的含6.0Al-4.0V的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6935-2004 固溶热处理和老化的含6.0Al-6.0V-2.0Sn的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6936-2004 退火的含6Al-6V-2Sn的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6940-2004 退火的含3.0Al-2.5V的钛合金棒材、锻件和锻坯 8 页
SAE AMS 6945-2005 Titanium Alloy, Single Melt, Sheet, Strip, and Plate 7Al - 4V Annealed UNS R56400 页
SAE AMS 7254-2002 全氟乙醚合成橡胶 10 页
SAE AMS 7254A-2006 Perfluoroether Elastomer 页
SAE AMS 7255C-1996(R2003) 70-80耐液压机液体和合成油的四氟乙烯/丙烯橡胶密封圈 9 页
SAE AMS 7256A-1996(R2003) 85-95耐液压机液体和合成油的四氟乙烯/丙烯橡胶密封圈 9 页
SAE AMS 7257C-1993(R1998) 70-80耐高温流体的全氟化碳橡胶密封圈 8 页
SAE AMS 7258B-1990(R2001) 65-75低收缩、耐燃料的丁二烯-丙烯腈橡胶密封圈 13 页
SAE AMS 7259D-2001 85-95低压缩形变、耐高温流体的氟化碳橡胶密封圈 12 页
SAE AMS 7260E-1994(R2001) 70-80耐低温和耐燃料的模制丁二烯-丙烯腈橡胶圈 7 页
SAE AMS 7264A-1988(R2003) 65-75低压缩形变、耐高温的硅酮橡胶密封圈 7 页
SAE AMS 7266B-1990(R2001) 65-75耐高温、耐燃料和耐油的一般用途氟化碳橡胶密封圈 8 页
SAE AMS 7267G-2001(R2001) 70-80低压缩形变、耐热的硅酮橡胶密封圈 10 页
SAE AMS 7268C-1994(R2001) 65-75耐非油类物质、低压缩形变的硅酮橡胶密封圈 6 页
SAE AMS 7269B-1991(R2003) 45-55太空和真空装置用低除气的硅酮橡胶密封圈 11 页
SAE AMS 7270K-1998 65-75耐燃料的丁二烯-丙烯腈橡胶密封圈 10 页
SAE AMS 7271H-1992(R2001) 60-70耐燃料和耐低温的丁二烯-丙烯腈橡胶密封圈 14 页
SAE AMS 7272F-1991(R2001) 65-75耐合成润滑剂的丁二烯-丙烯腈橡胶密封圈 9 页
SAE AMS 7273C-1990(R2001) 70-80耐高温燃料和油的氟硅氧烷橡胶密封圈 14 页
SAE AMS 7274H-1991(R1995) 65-75耐油的丁二烯-丙烯腈橡胶密封圈 9 页
SAE AMS 7276G-2001 70-80低压缩形变、耐高温流体的氟化碳橡胶密封圈 13 页
SAE AMS 7284/1-1990(R2001) A类硬度65-75、耐航空燃料的磷腈(FZ)氟橡胶密封圈 4 页
SAE AMS 7284/2-1990(R2001) A类硬度75-85、耐航空燃料的磷腈(FZ)氟橡胶密封圈 3 页
SAE AMS 7301G-2003 含0.95Cr-0.20V(0.48-0.53C)表面硬化的高应力钢弹簧(SAE 6150) 6 页
SAE AMS 7320E-2005 Rings, Sealing, Cast Leaded-Tin Bronze, 80Cu - 16Sn - 5Pb As Cast 页
SAE AMS 7322E-2005 Rings, Sealing, Cast Tin Bronze 80Cu - 19Sn As Cast 页
SAE AMS 7445D-2001(R2006) 含17Cr退火的耐腐蚀钢球 页
SAE AMS 7488D-1977(R1991) 铝和铝合金闪光焊圈 5 页
SAE AMS 7490P-2004 耐腐蚀和耐热的奥氏体钢、奥氏体型铁、镍或钴合金或脱溶淬硬合金闪光焊圈 7 页
SAE AMS 7493L-2003 耐腐蚀的铁素体和马氏体钢闪光焊圈 6 页
SAE AMS 7496J-2002 碳钢和低合金钢闪光焊圈 7 页
SAE AMS 7498L-2002 钛和钛合金闪光焊圈 7 页
SAE AMS 7510/1A-1988(R1994) 33/67-15(119)250钐/钴、稀土/钴永磁铁 4 页
SAE AMS 7510/1B-2006 Magnets, Rare-Earth/Cobalt, Permanent Samarium-Cobalt, 33/67 - 15 (119) 250 页
SAE AMS 7510/2A-1988(R1994) 33/67-18(143)250钐/钴、稀土/钴永磁铁 4 页
SAE AMS 7510/2B-2006 Magnets, Rare-Earth/ Cobalt, Permanent Samarium-Cobalt, 33/67 - 18 (143) 250 页
SAE AMS 7510A-1988(R1994) 粉末冶金制造的稀土/钴永磁铁 12 页
SAE AMS 7510B-2006 Magnets, Rare-Earth/ Cobalt, Permanent Powder-Metallurgy Product 页
SAE AMS 7701E-2006 Nickel-Iron Alloy, Magnetic, Sheet and Strip Annealed 页
SAE AMS 7702E-2006 Nickel-Iron Alloy, Magnetic, Sheet and Strip Cold Rolled, Half-Hard Temper 页
SAE AMS 7705E-2006 Nickel-Iron Magnetic Alloy, Bars and Forgings 页
SAE AMS 7707C-2003 未退火、热轧的工业纯铁棒、薄板、带材和板材 5 页
SAE AMS 7713A-1995(R2000) 退火、冷精轧的电工铁棒材和带材 5 页
SAE AMS 7717D-2001(R2006) 成形级、退火的含50Ni-50Fe磁性镍-铁合金薄板和带材 页
SAE AMS 7718F-2002 含50Ni-50Fe磁性镍-铁合金棒材、杆材、管件和锻件 6 页
SAE AMS 7719D-2001 冲压的含50Ni-50Fe磁性镍-铁合金薄板和带材 5 页
SAE AMS 7721B-1986(R1994) 装配式的含93Pb-6.5Sb-0.50Sn的铅合金薄板和挤压件 6 页
SAE AMS 7725C-2000 高密度烧结的钨合金型材 5 页
SAE AMS 7731B-1986(R1995) 退火含99.97Au的金丝和金带 8 页
SAE AMS 7732C-2003 退火含99Fe-0.32Mn的包铜圆钢丝 5 页
SAE AMS 7733C-2003 退火含99Fe-0.45Mn(最大含碳量0.13C)的包铜圆钢丝 5 页
SAE AMS 7735C-1993(R2000) 固溶热处理含35Pd-30Ag-14Cu-10Au-10Pt-0.85Zn的圆合金丝 7 页
SAE AMS 7819C-2004 消除应力、电弧熔铸的含0.48Ti-0.09Zr-0.02C的钼合金棒材 7 页
SAE AMS 7846-1988(R1993) 退火含90Ta-10W的钽合金棒材和杆材 5 页
SAE AMS 7847C-2006 Tantalum Alloy Sheet, Strip, and Plate 90Ta - 10W UNS R05255 页
SAE AMS 7848C-2006 Tantalum Alloy, Bars and Rods 90Ta - 10W UNS R05255 页
SAE AMS 7849D-2006 Tantalum Sheet, Strip, and Plate Annealed UNS R05210 页
SAE AMS 7850C-2002 铌薄板、带材、板材和箔 5 页
SAE AMS 7850C-2002(R2006) 铌薄板、带材、板材和箔 页
SAE AMS 7851C-2003 再结晶含10W-2.5Zr的铌合金箔、薄板、带材和板材 6 页
SAE AMS 7852B-2003 含10Hf-1.0Ti的铌合金薄板、带材和板材 7 页
SAE AMS 7855C-2003 再结晶含10W-2.5Zr的铌合金棒材、杆材和线材 7 页
SAE AMS 7857B-2003 再结晶退火含10Hf-1.0Ti的铌合金棒材、杆材和挤压件 7 页
SAE AMS 7875C-2000(R2004) 含75Cr2C3+25(80Ni-20Cr合金)的碳化铬加镍-铬合金粉末 6 页
SAE AMS 7879D-2002 铸造和粉碎的碳化钨-钴粉末 5 页
SAE AMS 7879D-2002(R2006) 铸造和粉碎的碳化钨-钴粉末 页
SAE AMS 7880B-1987(R2002) 烧结和粉碎的碳化钨-钴粉末 6 页
SAE AMS 7881-2003 凝聚和烧结的碳化钨-钴粉末 5 页
SAE AMS 7882-2003 凝聚和烧结的碳化钨-钴铬粉末 5 页
SAE AMS 7902E-2006 Beryllium Sheet and Plate 98Be UNS R19801 页
SAE AMS 7904C-2006 Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade 页
SAE AMS 7905B-2006 Beryllium Bars, Rods, Tubing, and Shapes Optical Grade 页
SAE AMS 7906A-2001 标准级的铍棒材、杆材、管材和型材 7 页
SAE AMS 7906B-2006 Beryllium Bars, Rods, Tubing, and Shapes Standard Grade 页
SAE AMS 7907A-2001 仪表级的铍棒材、杆材、管材和型材 8 页
SAE AMS 7907B-2006 Beryllium Bars, Rods, Tubing, and Shapes Instrument Grade 页
SAE AMS 7908A-2001 标准级接近零件形状的铍预成型坯 8 页
SAE AMS 7908B-2006 Beryllium Near-Net Preforms Standard Grade Hot Isostatic Pressed 页
SAE AMS 7909-2005 含38Al-62Be的热等静压铝铍NNS预成型坯 页
SAE AMS 7910A-2001 烧结、冷等压、标准级接近零件形状的铍预成型坯 7 页
SAE AMS 7910B-2006 Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered 页
SAE AMS 7911B-2005 含38Al-62Be的热等静压铝铍预成型坯 页
SAE AMS 7912A-2001 退火、含38Al-62Be的铝铍合金挤压件 6 页
SAE AMS 7912B-2006 Aluminum-Beryllium Alloy, Extrusions 38Al - 62Be Annealed 页
SAE AMS 7913A-2001 含38Al-62Be的铝铍合金薄板和板材 8 页
SAE AMS 7913B-2006 Aluminum-Beryllium Alloy, Sheet and Plate 38Al - 62Be 页
SAE AMS 7918-2003 铸造状态含64.9Be-30Al-3Ag-1Co-0.75Ge的铍铝合金熔模铸件 10 页
SAE AMS-A-22771-1999 热处理的铝合金锻件 24 页
SAE AMS-A-25463-1999 用于金属夹层结构的薄膜状粘结剂 22 页
SAE AMS-A-81596-1998 用于夹层结构的铝箔 11 页
SAE AMS-A-8576-1997(R2005) 用于丙烯酸塑料制品的丙烯酸基粘合剂 页
SAE AMS-B-20148-1998 铝合金钎接金属片 12 页
SAE AMS-B-8964-1999 铍薄板和板材的一般要求 10 页
SAE AMS-C-19853-1998 除碳剂（用于搅动槽） 19 页
SAE AMS-C-22542-1998 高压清洁器用的液体洗涤剂 20 页
SAE AMS-C-22587-1999 14盎司油脂筒（用于筒型注油枪） 11 页
SAE AMS-C-27725A-2001 使用至250°F(121°C)的飞机整体燃料箱聚亚胺酯防腐涂层 18 页
SAE AMS-C-29602-1999 零件清洗机和喷雾机用的洗涤剂 24 页
SAE AMS-C-6183-1998 耐芳族燃料和油垫圈用的软木和橡胶合成薄板 15 页
SAE AMS-C-7438-1999(R2006) Core Material, Aluminum, for Sandwich Construction FSC 5680 页
SAE AMS-C-8073-1998(R2006) Core Material, Plastic Honeycomb, Laminated Glass Fabric Base, for Aircraft Structural and Electronic Applications 页
SAE AMS-C-81562-1998(R2005) Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited) 页
SAE AMS-C-81769-1998 金属的化学蚀刻规范 24 页
SAE AMS-C-81986-1998 航空结构用的尼龙薄膜基塑料蜂窝芯材 11 页
SAE AMS-C-83231A-2001 用于飞机和导弹外部塑料零件的耐雨蚀聚亚胺酯涂层 28 页
SAE AMS-C-83445A-2001 反射热、不变黄、耐雨蚀、白色聚亚胺酯涂层系统 20 页
SAE AMS-C-83873-1999 航空和航天地面设备的预涂层表面洗涤剂 23 页
SAE AMS-C-8837-1999 镉镀层（真空沉积的） 13 页
SAE AMS-C-9084-1999 层压树脂用的精制玻璃织物 17 页
SAE AMS-D-81956-2001 外部可移动燃料箱的清洁剂 9 页
SAE AMS-DTL-22499/1A-1999(R2005) Shim Stock, Laminated, Aluminum Alloy FSC 9535 页
SAE AMS-DTL-22499/2A-1999(R2005) Shim Stock, Laminated, Brass FSC 9535 页
SAE AMS-DTL-22499/3-1998 层压不锈钢薄垫片坯 3 页
SAE AMS-DTL-22499/4-1998 层压碳钢薄垫片坯 3 页
SAE AMS-DTL-22499-1998 层压薄垫片坯 11 页
SAE AMS-DTL-23053/10-1999 挠性、热收缩的硅酮橡胶电绝缘套管 6 页
SAE AMS-DTL-23053/11-1999 不交联、热收缩的氯化乙丙橡胶电绝缘套管 7 页
SAE AMS-DTL-23053/1-1999 挠性、交联、热收缩的氯化聚烯烃电绝缘套管 7 页
SAE AMS-DTL-23053/12-1999 热收缩的聚四氟乙烯电绝缘套管 10 页
SAE AMS-DTL-23053/13-1999 挠性、热收缩的氟橡胶电绝缘套管 6 页
SAE AMS-DTL-23053/14-1999 半刚性、热收缩的乙烯-四氟乙烯含氟聚合物电绝缘套管 6 页
SAE AMS-DTL-23053/15-1999 厚管壁、有涂层、外层管壁交联、热收缩的聚烯烃电绝缘套管 7 页
SAE AMS-DTL-23053/16-1999 挠性、交联、热收缩的聚烯烃合成橡胶电绝缘套管 6 页
SAE AMS-DTL-23053/17-1999 交联、挠性、阻燃、热收缩、改进的聚烯烃电绝缘套管 7 页
SAE AMS-DTL-23053/18-1999 交联、热收缩、改进的含氟聚合物电绝缘套管 9 页
SAE AMS-DTL-23053/4-1999 双重管壁、外层管壁交联、热收缩的聚烯烃电绝缘套管 8 页
SAE AMS-DTL-23053/5-1999 交联、挠性、热收缩的聚烯烃电绝缘套管 9 页
SAE AMS-DTL-23053/6-1999 交联、半刚性、热收缩的聚烯烃电绝缘套管 7 页
SAE AMS-DTL-23053/7-1999 不交联、热收缩的聚对苯二甲酸乙二醇酯电绝缘套管 8 页
SAE AMS-DTL-23053/8-1999 交联、半刚性、热收缩的聚偏二氟乙烯电绝缘套管 7 页
SAE AMS-DTL-23053-1999 热收缩电绝缘套管的通用规范 26 页
SAE AMS-F-24610-1999(R2006) Fixant, Hold Down 页
SAE AMS-F-7190-1999 航空/航天设备和特殊军火用的钢锻件 11 页
SAE AMS-G-25667-1999(R2006) Glass, Monolithic, Aircraft Glazing 页
SAE AMS-G-25871-1999(R2006) Glass, Laminated, Aircraft Glazing 页
SAE AMS-G-4343-1999 气动系统的油脂 11 页
SAE AMS-G-6032-1999 耐汽油和油类的旋塞阀油脂 12 页
SAE AMS-G-81827-2001 负载量高、使用温度范围宽的飞机润滑油脂 14 页
SAE AMS-G-81937-2001 米制的超净仪表用油脂 16 页
SAE AMS-G-952A-1998 油和溶剂的喷枪 6 页
SAE AMS-H-6875A-1998(R2006) Heat Treatment of Steel Raw Materials Should Be Used Instead of MIL-H-6875, Which Was Cancelled on 2 February 1999 页
SAE AMS-H-7199-1998 锻制铜-铍合金的热处理工艺(铜合金:编号C17000,C17200,C17300,C17500,和C17510) 13 页
SAE AMS-H-81200A-2003 钛和钛合金的热处理 29 页
SAE AMS-H-81829-1998 传热的含氟化合物液体 8 页
SAE AMS-HH-G-101-2000 金属包装的垫圈 11 页
SAE AMS-I-10-2000 L类陶瓷电绝缘化合物 12 页
SAE AMS-I-23011-1998 玻璃和陶瓷密封用的铁-镍合金 21 页
SAE AMS-I-23053/2-2000 交联和不交联、挠性、热收缩的聚氯乙烯电绝缘套管 7 页
SAE AMS-I-23053/3-2000 交联和不交联、半刚性、热收缩的聚氯乙烯电绝缘套管 6 页
SAE AMS-I-538-1999 粘贴云母的电绝缘 19 页
SAE AMS-I-7068-1999 锌合金锭（用于金属板成型模） 6 页
SAE AMS-I-7171-1999 热-声音的绝缘衬垫 17 页
SAE AMS-I-7444-1998 挠性的电绝缘套管 16 页
SAE AMS-I-83387-1999 磁性橡胶检查工艺 22 页
SAE AMS-L-18331-1999 铅合金锭 6 页
SAE AMS-L-P-391-1999 刚性铸造的多用途异丁烯酸酯塑料薄板、杆材和管材 26 页
SAE AMS-M-3171-1998(R2005) Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on 页
SAE AMS-M-45202-2000 镁合金的阳极处理 29 页
SAE AMS-M-7866-1998 二硫化钼 润滑油添加剂 9 页
SAE AMS-P-21600-1998 飞机用可清除的荧光漆系统 20 页
SAE AMS-P-21922-1999 聚乙烯塑料杆材和管材 11 页
SAE AMS-P-22968-1999 热敏记录纸 14 页
SAE AMS-P-29609-2001 非金属多孔的聚酰亚胺保持架材料 12 页
SAE AMS-P-38336-1998 用于钢表面的自硬无机有色锌粉底涂层 14 页
SAE AMS-P-46112-2000 聚酰亚胺塑料薄板和带材 17 页
SAE AMS-P-46144-2000 聚碳酸脂塑料薄板 16 页
SAE AMS-P-5315A-2001 60-70耐燃料、密封用的丁二烯-丙烯腈橡胶 10 页
SAE AMS-P-5510-1998 (-65-160°F)液压I型直螺纹管配件圆凸台的预成型包装 13 页
SAE AMS-P-5516-1998 160°F耐石油液压液的预成型包装 30 页
SAE AMS-P-81728-1998(R2005) Plating, Tin-Lead (Electrodeposited) 页
SAE AMS-P-83310-1998 透明的聚碳酸脂塑料薄板 15 页
SAE AMS-P-83461/1A-2002 275°F(135°C)改进性能、耐石油液压液的预成型包装的尺寸和公差 9 页
SAE AMS-P-83461/2-2001 用于圆凸台配件、275°F(135°C)改进性能、耐石油液压液的预成型包装的尺寸和公差 3 页
SAE AMS-P-83461-1998 275°F(135°C)改进性能、耐石油液压液的预成型包装 16 页
SAE AMS-PRF-46194A-2003 闭孔结构的刚性泡沫材料 9 页
SAE AMS-QQ-A-200/10-1997 挤压的6066铝合金棒材、杆材、型材、管材和线材 7 页
SAE AMS-QQ-A-200/11-1997 挤压的7075铝合金棒材、杆材、型材、管材和线材 8 页
SAE AMS-QQ-A-200/1-1997 挤压的3003铝合金棒材、杆材、型材、管材和线材 5 页
SAE AMS-QQ-A-200/13A-1998 挤压的7178铝合金棒材、杆材、型材、管材和线材 7 页
SAE AMS-QQ-A-200/14-1997 挤压的、耐剥落、改进的7178-T76铝合金棒材、杆材、型材和线材 6 页
SAE AMS-QQ-A-200/15A-1998 挤压的、耐剥落、改进的7075-T76铝合金棒材、杆材、型材 6 页
SAE AMS-QQ-A-200/16-1997 挤压的铝合金结构型材 5 页
SAE AMS-QQ-A-200/17-1997 挤压的6162铝合金棒材、杆材、型材、管材和线材 7 页
SAE AMS-QQ-A-200/2-1997 挤压的2014铝合金棒材、杆材、型材、管材和线材 8 页
SAE AMS-QQ-A-200/3-1997 挤压的2024铝合金棒材、杆材、型材、管材和线材 7 页
SAE AMS-QQ-A-200/4A-1998 挤压的5083铝合金棒材、杆材、型材、管材和线材 5 页
SAE AMS-QQ-A-200/5-1997 挤压的5086铝合金棒材、杆材、型材、管材和线材 5 页
SAE AMS-QQ-A-200/6A-1998 挤压的5454铝合金棒材、杆材、型材、管材和线材 6 页
SAE AMS-QQ-A-200/7A-1998 挤压的5456铝合金棒材、杆材、型材、管材和线材 4 页
SAE AMS-QQ-A-200/8-1997 挤压的6061铝合金棒材、杆材、型材、管材和线材 7 页
SAE AMS-QQ-A-200/9-1997 挤压的6063铝合金棒材、杆材、型材、管材和线材 7 页
SAE AMS-QQ-A-200B-2004 挤压的铝合金棒材、杆材、型材、结构型材、管材和线材：通用规范 11 页
SAE AMS-QQ-A-225/10-1997 轧制、拉制或冷加工的6262铝合金棒材、杆材和线材 4 页
SAE AMS-QQ-A-225/1A-1998 轧制、拉制或冷加工的1100铝合金棒材、杆材和线材 4 页
SAE AMS-QQ-A-225/2-1997 轧制、拉制或冷加工的3003铝合金棒材、杆材和线材 5 页
SAE AMS-QQ-A-225/3-1997 轧制、拉制或冷加工的2011铝合金棒材、杆材和线材 4 页
SAE AMS-QQ-A-225/4-1997 轧制、拉制或冷加工的2014铝合金棒材、杆材、线材和特殊型材 6 页
SAE AMS-QQ-A-225/5-1997 轧制、拉制或冷加工的2017铝合金棒材、杆材和线材 6 页
SAE AMS-QQ-A-225/6A-1998 轧制、拉制或冷加工的2024铝合金棒材、杆材和线材 6 页
SAE AMS-QQ-A-225/7-1997 轧制、拉制或冷加工的5052铝合金棒材、杆材和线材 4 页
SAE AMS-QQ-A-225/8A-1998 轧制、拉制或冷加工的6061铝合金棒材、杆材、线材和特殊型材 5 页
SAE AMS-QQ-A-225/9-1997 轧制、拉制或冷加工的7075铝合金棒材、杆材、线材和特殊型材 6 页
SAE AMS-QQ-A-250/10-1997 5454铝合金板材和薄板 5 页
SAE AMS-QQ-A-250/11-1997 6061铝合金板材和薄板 7 页
SAE AMS-QQ-A-250/1-1997 1100铝板材和薄板 5 页
SAE AMS-QQ-A-250/12-1997 7075铝合金板材和薄板 7 页
SAE AMS-QQ-A-250/13-1997 镀铝的7075铝合金板材和薄板 7 页
SAE AMS-QQ-A-250/14-1997 7178铝合金板材和薄板 6 页
SAE AMS-QQ-A-250/15A-1998 镀铝的7178铝合金板材和薄板 7 页
SAE AMS-QQ-A-250/18-1997 单面镀铝的7075铝合金板材和薄板 8 页
SAE AMS-QQ-A-250/19-1998 用于海水的5086铝合金板材和薄板 11 页
SAE AMS-QQ-A-250/19A-2006 Aluminum Alloy 5086, Plate and Sheet for Sea Water Applications 页
SAE AMS-QQ-A-250/20-1998 用于海水的5456铝合金板材和薄板 13 页
SAE AMS-QQ-A-250/20A-2006 Aluminum Alloy 5456, Plate and Sheet, for Sea Water Applications 页
SAE AMS-QQ-A-250/2-1997 3003铝合金板材和薄板 6 页
SAE AMS-QQ-A-250/21A-1998 耐剥落、改进的7178-T76铝合金板材和薄板 7 页
SAE AMS-QQ-A-250/22A-1998 耐剥落、改进的7178-T76铝合金镀铝的板材和薄板 10 页
SAE AMS-QQ-A-250/24A-1998 耐剥落、改进的7075铝合金板材和薄板 9 页
SAE AMS-QQ-A-250/25A-1998 耐剥落、改进的铝合金镀铝的7075板材和薄板 10 页
SAE AMS-QQ-A-250/26A-1998 7011镀铝的铝合金7075板材和薄板 14 页
SAE AMS-QQ-A-250/28A-1998 7011镀铝的铝合金7178板材和薄板 13 页
SAE AMS-QQ-A-250/29-1997 铝合金2124板材 7 页
SAE AMS-QQ-A-250/30-1997 铝合金2219板材和薄板 9 页
SAE AMS-QQ-A-250/3-1997 镀铝的2014铝合金板材和薄板 8 页
SAE AMS-QQ-A-250/4A-1998 2024铝合金板材和薄板 8 页
SAE AMS-QQ-A-250/5A-1998 镀铝的2024铝合金板材和薄板 9 页
SAE AMS-QQ-A-250/6-1997 5083铝合金板材和薄板 5 页
SAE AMS-QQ-A-250/7-1997 5086铝合金板材和薄板 5 页
SAE AMS-QQ-A-250/8A-1998 5052铝合金板材和薄板 6 页
SAE AMS-QQ-A-250/9-1997 5456铝合金板材和薄板 5 页
SAE AMS-QQ-A-250A-2004 铝和铝合金板材和薄板的通用规范 10 页
SAE AMS-QQ-A-367-2000 铝合金锻件 27 页
SAE AMS-QQ-A-591-2000 铝合金压模铸件 12 页
SAE AMS-QQ-C-320-2000 铬镀层（电镀） 16 页
SAE AMS-QQ-N-290-2000 镍镀层（电镀） 16 页
SAE AMS-QQ-P-416B-2004 镉镀层（电镀） 20 页
SAE AMS-QQ-S-700A-2002 中碳钢和高碳钢薄板和带材 6 页
SAE AMS-R-25988-1998 耐油和燃料的氟硅氧烷人造橡胶薄板、带材、模制零件和挤压型材 19 页
SAE AMS-R-3065-2000 橡胶的装配式产品 13 页
SAE AMS-R-5001-1998 乳胶泡沫材料蜂窝状橡胶薄板、模制和手工制造的型材 21 页
SAE AMS-R-6855A-1999 合成橡胶薄板、带材、模制或挤压型材的通用规范 31 页
SAE AMS-R-7362-1998(R2005) 耐合成油的实心合成橡胶薄板、带材和互换配件 页
SAE AMS-R-81828-2001 耐臭氧的氯磺化聚乙烯人造橡胶薄板和模制型材 13 页
SAE AMS-R-81835-1999 热罐型有机涂层去除剂 10 页
SAE AMS-R-81903-2001 胺固化的环氧涂层系统用的活性酸去除剂 15 页
SAE AMS-R-83248/1-2000 耐高温、流体和压缩形变的碳氟人造橡胶（硬度75、1类O形密封环） 8 页
SAE AMS-R-83248/2-2000 耐高温、流体和压缩形变的碳氟人造橡胶（硬度90、2类O形密封环） 2 页
SAE AMS-R-83283-1998 隔膜式高强度硅酮橡胶舱压密封材料 9 页
SAE AMS-R-83285-1998 一般用途的乙丙橡胶 11 页
SAE AMS-R-83412/1-1999 耐联氨的乙丙橡胶O形密封环 尺寸和公差 8 页
SAE AMS-R-83412-1999 耐联氨的乙丙橡胶 14 页
SAE AMS-R-83485/1-2001 低温性能改进的碳氟人造橡胶O形密封环 尺寸和公差 8 页
SAE AMS-R-83485-1998 低温性能改进的碳氟人造橡胶 15 页
SAE AMS-S-13165-1997 金属零件的喷丸硬化 27 页
SAE AMS-S-29574-2001 用于飞机结构在周围环境和低温下快速固化、耐燃料和耐高温的聚硫醚密封剂 39 页
SAE AMS-S-4383-1999 燃料箱表面涂层的丁腈橡胶型密封剂 18 页
SAE AMS-S-5000-1999 含铬-镍-钼(E4340)的钢棒和重新锻造的钢坯 12 页
SAE AMS-S-7108-1998 航空优质（铬-镍-钼）合金钢棒和锻坯 12 页
SAE AMS-S-7720-1997 航空优质、耐腐蚀(18-8)钢棒、钢丝和锻坯 9 页
SAE AMS-S-83318A-2003 用于整体燃料箱和燃料电池腔快速修补、低温固化的聚硫化物型密封剂 13 页
SAE AMS-S-83474-1998 填充树脂化合物和预浸渍薄片的模制薄垫片 11 页
SAE AMS-S-85420-2001 用于飞机结构快速修补、低温固化的聚硫化物密封剂 24 页
SAE AMS-S-8802B-2005 用于整体燃料箱和燃料电池腔的高粘附力、耐温变的密封剂 15 页
SAE AMS-STD-184-2000 铝、镁和钛的识别标记 7 页
SAE AMS-STD-185-2000 铜和铜基合金轧制成品的识别标记 9 页
SAE AMS-STD-2154-1998(R2005) Inspection, Ultrasonic, Wrought Metals, Process for 页
SAE AMS-STD-401-1999 夹层结构和芯材料：通用测试方法 35 页
SAE AMS-STD-66-1998 钢：化学成分和淬硬性 12 页
SAE AMS-T-21014-1998 高密度钨基金属 9 页
SAE AMS-T-21595-1998 飞机涂漆用的不着色遮蔽压敏胶带 13 页
SAE AMS-T-22085-1999 保存和密封用的压敏胶带 20 页
SAE AMS-T-23397-1998 在脱漆操作时遮蔽用的压敏胶带 15 页
SAE AMS-T-6841-1998 橡胶和软木组成的胶带和薄胶片 18 页
SAE AMS-T-6845-1999 1/8硬质条件下宇航飞行器液压系统用不锈钢管(S30400) 13 页
SAE AMS-T-7081-1999 航空液压优质6061拉制的无缝铝合金圆管 12 页
SAE AMS-T-81533-2001 蒸气脱脂用抑制的1，1，1-三氯乙烷 11 页
SAE AMS-T-81914/1-1999 盘旋状的聚四氟乙烯塑料软管 标准盘旋 5 页
SAE AMS-T-81914/2-1999 盘旋状的聚四氟乙烯塑料超软管 紧密盘旋 5 页
SAE AMS-T-81914/3-1999 盘旋状的氟化乙丙烯塑料软管 标准盘旋 5 页
SAE AMS-T-81914/4-1998 盘旋状的氟化乙丙烯塑料超软管 紧密盘旋 5 页
SAE AMS-T-81914/5-1998 盘旋状的乙烯-四氟乙烯塑料超软管 紧密盘旋 5 页
SAE AMS-T-81914/6-1999 盘旋状的乙烯-四氟乙烯塑料软管 标准盘旋 5 页
SAE AMS-T-81914/7-1999 盘旋状的氟化乙丙烯塑料软管 整体编织 5 页
SAE AMS-T-81914-1998 盘旋状的塑料软管的通用规范 15 页
SAE AMS-T-81915-1998 钛和钛合金熔模铸件 13 页
SAE AMS-W-6858A-2000(R2005) Welding, Resistance: Spot and Seam 页
SAE AMS-WW-T-700/1-2001 拉制的1100铝无缝管 5 页
SAE AMS-WW-T-700/2-2001 拉制的3003铝合金无缝管 5 页
SAE AMS-WW-T-700/3-2001 拉制的2024铝合金无缝管 6 页
SAE AMS-WW-T-700/4-2001 拉制的5052铝合金无缝管 5 页
SAE AMS-WW-T-700/5-2001 拉制的5086铝合金无缝管 6 页
SAE AMS-WW-T-700/6-2001 拉制的6061铝合金无缝管 7 页
SAE AMS-WW-T-700/7-2001 拉制的7075铝合金无缝管 7 页
SAE AMS-WW-T-700-2001 拉制的无缝铝和铝合金管的通用规范 10 页
SAE ARD 4461-1990 宇航飞行器中电线和电缆终端高品质/高可靠性焊接的装配和焊接标准 42 页
SAE ARD 50002-1992 条件监测和性能分析软件的标准化概念讨论 36 页
SAE ARD 50007-1992 实时通信协议要求的综述 40 页
SAE ARD 50008-1992(R2001) 逻辑地址分配和推荐 20 页
SAE ARD 50011-1992 航空电子设备底板模块化的功能要求和一致条款 40 页
SAE ARD 50013-1991 固体燃料火箭助推器的可靠性指南 94 页
SAE ARD 50015-1991 进口/发动机感温变形问题的现行评估法 75 页
SAE ARD 50016-1998 平视显示仪的人类因素问题 32 页
SAE ARD 50017-1992 航空领航图 41 页
SAE ARD 50018-1995 使直升机并入美国航空系统 30 页
SAE ARD 50019-1995 增强视觉系统的人类工程学问题 39 页
SAE ARD 50022-1992 局部存储器总线的要求 14 页
SAE ARD 50026-1995 平面波的现行估算法 77 页
SAE ARD 50027-1991 数据链路系统的人类工程学问题 32 页
SAE ARD 50031-1991 270Vdc继电器的通用规范 60 页
SAE ARD 50034-1993 乘客的呼吸保护设备 4 页
SAE ARD 50037-1996 乘务员的资源管理训练 18 页
SAE ARD 50046-1993 RMS（可靠性、可维护性、可支承性）的资料集 78 页
SAE ARD 50047-1997 概率方法 需求和目标的产业界/政府/学术界评估法的接合点 16 页
SAE ARD 50048-1998 人类模型系统用户要求综述 79 页
SAE ARD 50050-1997 情景意识模型的要求 11 页
SAE ARD 50055-1998 飞机的电气系统 66 页
SAE ARD 50062-1996 确保地形区分显示技术相关的人类因素问题 59 页
SAE ARD 50066-1996 飞机积冰研究人员名录 64 页
SAE ARD 50069-2002 发动机状态监测的美国政府文档保存状况和非政府神经网络应用 24 页
SAE ARD 50079-1998 自由飞行中的人类因素问题 39 页
SAE ARD 50083-1999 与交通信息座舱显示相关的人类因素问题 42 页
SAE ARD 50093-2002 紧密平行跑道和精密跑道监控器操作在飞行员训练中未解决的问题 19 页
SAE ARD 50102-2002 排除冻结污染物用的强制通气或强制通气/液体设备 42 页
SAE ARD 5296-2002 航空电子设备体系结构描述语言的要求 18 页
SAE ARD 5906-2003 冰冻模型的测量和比较技术车间 86 页
SAE ARP 1048A-2000 通用航空飞机的仪表和驾驶员座舱照明 7 页
SAE ARP 1048B-2006 (R) Instrument and Cockpit Illumination for General Aviation Aircraft 页
SAE ARP 1051B-1999(R2005) Format, Text, and Numbering System for Preparing Specifications Covering Civil Aircraft Ground Support Equipment 页
SAE ARP 1052A-1999 地面支持设备用内燃机的选择准则 8 页
SAE ARP 1061A-1999 高度报警装置和系统 19 页
SAE ARP 1070B-1991(R2001) 与整个飞机相容的防滑刹车控制系统的设计和测试 36 页
SAE ARP 1084-1969(R1995) 运行中部件的液压外部渗漏 3 页
SAE ARP 1088A-2004 飞机的指示系统 6 页
SAE ARP 1107B-2001 有人驾驶飞机的尾部缓冲器 6 页
SAE ARP 1107B-2001(R2006) 有人驾驶飞机的尾部缓冲器 页
SAE ARP 1109B-1997(R2002) 氧气呼吸设备的动态试验系统 16 页
SAE ARP 1110B-2006 Minimizing Stress Corrosion Cracking in Wrought Forms of Steels and Corrosion Resistant Steels and Alloys 页
SAE ARP 1111-1969(R1994) 磨损的渐开线花键的检查 5 页
SAE ARP 1134-1973(R1989) 连接装置的接口--涡轮发动机叶片的矩秤 5 页
SAE ARP 1135A-2004 使用上限为500,000磅的液压驱动末端或齿轮传动扭力扳手的标准化 5 页
SAE ARP 1146B-1991 民航运输机的组合撤离滑道/筏 7 页
SAE ARP 1153A-1991(R2001) 聚四氟乙烯管的相对比重的测定方法 4 页
SAE ARP 1161A-2002(R2004) 商用飞机乘务员站的照明 32 页
SAE ARP 1172-1972(R1991) 降低电磁干扰的常规滤波器的通用规范 19 页
SAE ARP 1173-1975(R2004) 测量电磁干扰垫圈的射频屏蔽特性的测试程序 12 页
SAE ARP 1176-1999 氧气系统和组件的清洗和包装 35 页
SAE ARP 1178A-1998 飞机的撤离信号系统 2 页
SAE ARP 1179C-1997 飞机燃气涡轮发动机的烟尘排放测量 14 页
SAE ARP 1185B-1993(R2001) 液压管接头和配件的弯曲试验 15 页
SAE ARP 1199B-1998 电气过电流保护设备的选择、应用和检查 60 页
SAE ARP 1201C-2001(R2005) 液压配件用六角形棒材、机制扁材和锻制扳紧扁材的尺寸公差 页
SAE ARP 1202A-1987(R1992) 支承转子用球型随动轴承的动态平衡机 4 页
SAE ARP 1206-1970 控制系统推进剂快速分离用的宇航地面设备准则 9 页
SAE ARP 1210D-2002 燃气涡轮发动机接口测试数据处理的计算机程序 11 页
SAE ARP 1217A-1997 涡轮轴发动机性能测量的测试设备要求 4 页
SAE ARP 1231A-2001(R2006) 人造橡胶O形环密封盖的设计总则 页
SAE ARP 1232B-2001(R2006) 静态径向人造橡胶O形环密封盖的设计 页
SAE ARP 1233A-2001(R2006) 最大1500psi、动态径向人造橡胶O形环密封盖的设计 页
SAE ARP 1234B-2001(R2006) Gland Design, Elastomeric O-Ring Seals, Static Axial, Without Back-Up Rings 页
SAE ARP 1247C-1993 机动和非机动宇航地面支持设备的通用要求 38 页
SAE ARP 1256B-1990 飞机涡轮发动机气体排放的连续抽样和测量的程序 19 页
SAE ARP 1258B-1993(R2004) 对规定弯曲疲劳要求的液压管接头的鉴定 4 页
SAE ARP 1267-1973(R2004) 电磁干扰测量脉冲发生器：标准校准要求和技术 18 页
SAE ARP 1270A-2000(R2006) 机舱增压控制准则 页
SAE ARP 1278-1978(R1994) 测量火花能的示波器法 14 页
SAE ARP 1280A-1994(R2002) 液压动力传递装置的宇航应用指南 13 页
SAE ARP 1281C-2002 飞机飞行控制用液压驱动的传动装置的通用规范 41 页
SAE ARP 1282A-2000 救生装置--救生筏和撤离滑道/筏 5 页
SAE ARP 1283A-1992(R2005) 运输类飞机和旋翼机的货舱照明 5 页
SAE ARP 1287A-1992(R2004) 宇航飞行器地面设备设计中使用的SAE标准 20 页
SAE ARP 1288A-1992 鉴别磷酸酯流体与飞机液压设备相容性的布告 页
SAE ARP 1307A-1987(R1991) 飞机辅助动力设备和相关装置在地面运转时发出的外部噪音的测量 11 页
SAE ARP 1311B-1999(R2004) 飞机起落装置 17 页
SAE ARP 1313B-1995(R2000) 高温合金中微量元素的测定 7 页
SAE ARP 1315C-1998 卫生间的安装 6 页
SAE ARP 1315D-2006 (R) Safety Considerations for Airplane Lavatories 页
SAE ARP 1320A-1991(R2000) 从固体化学氧发生器产生氧中含氯的测定 7 页
SAE ARP 1322A-1998(R2002) 过压释放装置 10 页
SAE ARP 1323A-1990 飞机巡航时内部声压级的类型测量 10 页
SAE ARP 1328B-2005 飞机地面支持设备的风稳定性测定 12 页
SAE ARP 1330B-1996(R2006) 地面支持设备的结构焊接 页
SAE ARP 1331B-1997 化学蚀刻工艺 13 页
SAE ARP 1332B-1997 波焊规程 15 页
SAE ARP 1333-1974(R1991) 钛基合金中电子束焊接接头非破坏性测试 16 页
SAE ARP 1334B-2004 与飞机组合装载装置相容的地面设备的要求 7 页
SAE ARP 1341B-2001(R2006) 在碳钢和低合金钢成品零件中脱碳和渗碳的测定 页
SAE ARP 1348A-1993(R2002) 行李/货物拖车的要求 5 页
SAE ARP 1350-1975(R1991) 单孔固定、圆柱状电气连接器的安装程序 4 页
SAE ARP 1352-1982(R1997) 直升机飞行任务的确定 7 页
SAE ARP 1360A-2001(R2006) 电子设备的氯化物和溴化物污染的检测 页
SAE ARP 1372B-2004 空运货物组合装载装置的地面装卸和运输系统的最低要求 14 页
SAE ARP 1382-1977(R1989) 平衡机的刀具设计准则 22 页
SAE ARP 1383B-2003 宇航液压传动装置、阀、压力容器和类似液压系统组件的冲击试验 25 页
SAE ARP 1384C-2003 乘客安全信息简卡和视频简报 13 页
SAE ARP 1398A-2000(R2006) 氧气设备的测试 页
SAE ARP 1400B-1999 通用航空往复式发动机（活塞型）飞机的润滑油过滤器用推荐实施规范 37 页
SAE ARP 1401A-1997 飞机燃料系统和组件的结冰测试 10 页
SAE ARP 1409C-2003 飞机载重和平衡系统的要求 20 页
SAE ARP 1420B-2002 燃气涡轮发动机输入流的畸变指南 24 页
SAE ARP 142B-2004 铝和镁中螺栓的装配 5 页
SAE ARP 147E-2001 环境控制系统术语 32 页
SAE ARP 1481A-1998(R2004) 外壳设计中的腐蚀控制和电导率 5 页
SAE ARP 1482B-1999 燃料和润滑油系统图表的建议 10 页
SAE ARP 1493A-1992(R2002) 军用飞机轮子和制动装置的设计和测试要求 34 页
SAE ARP 1507A-1997 直升机发动机/机身接口文件和核对清单 21 页
SAE ARP 1515A-2001(R2006) 带螺纹的紧固件突起部分穿过自锁螺母 页
SAE ARP 1523B-2000 空运式保温集装箱--热效率的要求 12 页
SAE ARP 1524A-1990(R2005) 胶粘剂粘接的高耐久性结构用铝合金零件的表面处理和涂底漆 页
SAE ARP 1527B-1992(R2004) 管道夹紧衬垫用弹性体的颜色编码 2 页
SAE ARP 1532A-1996(R2002) 飞机氧气系统管线的制造、测试和安装 6 页
SAE ARP 1533A-2004 飞机发动机气体排放的分析和评估程序 51 页
SAE ARP 1536A-1981(R2001) 磨损防护装置用的磨损测试规程 3 页
SAE ARP 1538A-1998(R2002) 陆基飞机的紧急着陆阻拦钩装置 12 页
SAE ARP 1554C-2002 汽车运输的组合装载装置 20 页
SAE ARP 1575A-1990(R2006) 手工磷酸阳极处理、胶粘剂粘接的高耐久性结构用铝合金零件的表面处理和涂底漆 页
SAE ARP 1587A-1993 飞机燃气涡轮发动机的监控系统指南 49 页
SAE ARP 1590-1999(R2004) 英制测量系统、液压系统组件用的推荐零件编号指南 20 页
SAE ARP 1595A-1997 飞机头部机轮操纵系统 11 页
SAE ARP 1595A-1997(R2006) 飞机头部机轮操纵系统 页
SAE ARP 1598A-1997(R2000) 起落装置系统的开发计划 19 页
SAE ARP 159A-1976(R1994) 火花塞的电介质测试 3 页
SAE ARP 1610A-1985(R1995) 环氧胶粘剂和预浸渍树脂系统的物理-化学特性鉴定技术 31 页
SAE ARP 1611A-1995 复合材料的质量检查程序--示踪物的荧光透视法和射线照相术 7 页
SAE ARP 1612A-1990(R1995) 聚酰亚胺印刷电路板的制造 18 页
SAE ARP 1616A-1991(R1997) 飞机燃料和润滑油系统抗撞击的自封式断开阀 18 页
SAE ARP 1619A-2001 替换和改进的制动装置和轮子 10 页
SAE ARP 1621B-1996(R2002) 用于马的航空运输的ULD（组合装载装置） 6 页
SAE ARP 1631-1984 抗拉强度为270,000psi(1860MPa)及以上，300M或4340改进的低合金钢高强度钢零件的制造工序 13 页
SAE ARP 1658B-1997(R2001) 安装软管组件的目视检查指南 46 页
SAE ARP 1665A-1997 受油飞机的压力波动试验和测量方法的定义 9 页
SAE ARP 1674A-1988(R2005) 连续多层碳纤维/环氧树脂浸渍的牛皮纸的自动制造 页
SAE ARP 1675-1990(R1995) 铝结构的结构点焊粘接 37 页
SAE ARP 1676-1982(R2004) 宇航用的带有扩口和非扩口端接头的单弯管配件的弯头尺寸测定的推荐公式 3 页
SAE ARP 169A-1996(R2006) 飞机发动机汽缸的编号方法 页
SAE ARP 1702A-1998 影响直升机涡轮发动机有效功率因素的定义和测量 14 页
SAE ARP 1705A-2006 (R) Coaxial Test Procedure to Measure the RF Shielding Characteristics of EMI Gasket Materials 页
SAE ARP 175-1948(R1991) 孔-插入型温度测量 4 页
SAE ARP 1755B-1993(R2000) 清洗剂对飞机发动机材料的影响--材料损耗的测试方法 23 页
SAE ARP 1757A-2002 货物装卸系统的标准化符号的使用 7 页
SAE ARP 1782A-2002(R2004) 机载直观阴极射线管显示器的光度测定和色度测定程序 88 页
SAE ARP 1785B-2004 软管组件外部套管的标准编码 2 页
SAE ARP 1786B-2005 (R) Wheel Roll on Rim Criteria for Aircraft Application 页
SAE ARP 1796-1987(R2004) 飞机发动机的放气系统 23 页
SAE ARP 1797A-1999 飞机和飞机发动机燃油泵的低润滑性流体耐久性试验 7 页
SAE ARP 1801-1982(R1991) 专用的飞机地面辅助设备外部声级的测量 5 页
SAE ARP 1802A-1992 液压和气动液压驱动用的聚四氟乙烯(PTFE或TFE)保护垫圈的选择和应用 17 页
SAE ARP 1804A-2005 (R) Electric Baggage/Cargo Tractor 页
SAE ARP 1816B-1996 蓄电池驱动的地面辅助设备的充电器 6 页
SAE ARP 1817A-1998(R2005) 电动地面辅助设备用的铅酸型工业蓄电池 7 页
SAE ARP 1820A-1997(R2002) 评估表面微观结构特征的弦齿法 7 页
SAE ARP 1821A-2001(R2003) 飞机地面浮力分析方法 6 页
SAE ARP 1827A-2003 飞机燃气涡轮发动机精炼油过滤器元件的性能测量 24 页
SAE ARP 1832-1985(R2003) O形密封圈的颜色识别 2 页
SAE ARP 1833A-2001 用于导弹的密封技术 45 页
SAE ARP 1834A-1997 飞机安全评估用ARP 4761数字系统和设备的故障/失效分析 69 页
SAE ARP 1835-1983(R2004) 软管组件交货准备的通用要求 3 页
SAE ARP 1836A-1994 蓄电池驱动的空运货物输送机 11 页
SAE ARP 1838A-1992(R1999) 地面辅助设备用的象形图 57 页
SAE ARP 1840A-2000 飞机发动机的运输装置 16 页
SAE ARP 1842-1984(R2005) 结构胶粘剂粘接的铝合金和低合金钢零件的表面制备 页
SAE ARP 1843A-1991(R2005) 结构胶粘剂粘接的钛合金零件的表面制备 页
SAE ARP 1846-1990 静态运转时燃气涡轮发动机的远场噪声的测量 17 页
SAE ARP 1862A-1991(R1995) 涡轮发动机气路清洁器的清洁效率的实验室测试法 8 页
SAE ARP 1870-1987(R1999) 用于电磁兼容性和安全的宇航系统电气连接和接地 56 页
SAE ARP 1874-1988(R1993) 适用于FAR/JAR 第25部分运输机的阴极射线管显示器的设计目标 14 页
SAE ARP 1876B-2002 焊条金属丝的可焊性测试 4 页
SAE ARP 1892B-1997 蓄电池驱动的地面辅助设备用的电气连接器 4 页
SAE ARP 1894A-1998(R2004) 化学氧气发生器的使用寿命测定 5 页
SAE ARP 1897-1990(R2001) 夹紧装置的选择和安装指南 18 页
SAE ARP 1902A-2001(R2006) T形头螺栓的连接面的尺寸 页
SAE ARP 1907A-2001 自动制动系统的要求 16 页
SAE ARP 1915C-2005 飞机的牵引杆 10 页
SAE ARP 1917A-2002 宇航金属规范用术语的解释 8 页
SAE ARP 1923A-2002 蚀刻检验员的资格和认证 16 页
SAE ARP 1925B-2001(R2006) 自动刷去除毛刺 页
SAE ARP 1926-1994 固化监控的电气方法 11 页
SAE ARP 1927-1989(R1995) 在环氧树脂和添加剂型聚酰亚胺树脂固化时直接加压的应用 10 页
SAE ARP 1931A-1997(R2006) 专用电线和电缆的术语汇编 页
SAE ARP 1942A-2003 用于液压配件和螺母的六角形对角尺寸 5 页
SAE ARP 1947A-1989(R1996) 飞机优质D357铝合金结构铸件的枝状晶体枝间间隙的测定和验收 8 页
SAE ARP 1953A-1996 确保清洁燃料系统组件的验收测试程序和标准 12 页
SAE ARP 1961-1991 机身安装的附件--变速箱 18 页
SAE ARP 1962A-1995 热处理职员的训练和批准 8 页
SAE ARP 1964-1988(R1993) 旋翼式飞机内部声压级的测量 5 页
SAE ARP 1967A-1999(R2005) 可重复使用的运输和贮藏的集装箱 页
SAE ARP 1971B-2003 自行式大功率和小功率的飞机除冰车 26 页
SAE ARP 1972-1986(R2003) 电磁兼容性测试的推荐测量规范和程序 77 页
SAE ARP 1974-1986(R2001) 支撑夹具的相对疲劳强度的测试方法 8 页
SAE ARP 1987/1-1994(R2001) SAE G-3B分委员会标题的选择 4 页
SAE ARP 1987/2-1995(R2001) SAE G-3D分委员会软管和软管组件标题的选择 4 页
SAE ARP 1987/3-1996(R2001) SAE G-3E分委员会宇航管道安装文件标题的选择 6 页
SAE ARP 1987/4-1996(R2001) SAE G-3A分委员会宇航管连接件文件标题的选择 5 页
SAE ARP 1987A-1994(R2004) SAE G-3委员会文件标题的选择 11 页
SAE ARP 217D-1999(R2006) 机载环境控制系统的测试 页
SAE ARP 219-1961(R1992) 污染物控制系统中液压组件的输送测试程序和方法 12 页
SAE ARP 246C-2001(R2006) 用于航空燃气涡轮发动机的发动机轴、坐标系和编号系统的定位 页
SAE ARP 24D-2005 (R) Determination of Hydraulic Pressure Drop 页
SAE ARP 260D-1996(R2006) 操纵杆连接（60度“V”锯齿状） 页
SAE ARP 2654-2001 超声波厚度测试 15 页
SAE ARP 292C-1998(R2003) 直升机的环境控制系统 54 页
SAE ARP 2B-1996(R2006) 功率修正公式 页
SAE ARP 355A-2004 双向和同轴反向旋转推进器的术语 1 页
SAE ARP 36103-2004 空运货物组合装载装置的重心控制方法 15 页
SAE ARP 36104-2005 Air Cargo Pallets and Nets Compatibility 页
SAE ARP 368C-1972(R1992) 火花塞的螺纹牙形数据(60度螺纹角) 2 页
SAE ARP 373B-1963(R2001) 传动轴转矩的额定值 1 页
SAE ARP 378B-1998 乘客阅读灯 5 页
SAE ARP 378C-2006 Passenger Reading Lights 页
SAE ARP 4001A-2000(R2006) 卫生间的烟雾探测器 页
SAE ARP 4024-1994 飞机/发动机燃油泵净正吸力压的性能测试和评估 20 页
SAE ARP 4032A-1998 对于飞机电子显示器色彩应用中人的因素的考虑 24 页
SAE ARP 4033-1995 飞行员-系统的综合 14 页
SAE ARP 4043A-1999 飞机的航线接地和连接 21 页
SAE ARP 4048-1993 燃气涡轮转子用水平、双平面、硬支承型平衡机的描述和评估 23 页
SAE ARP 4049-1992 货物束缚在飞机主客舱的乘客座位上 9 页
SAE ARP 4055-1988(R1993) 螺旋桨驱动的轻型飞机噪声测量用的地面麦克风的配置 13 页
SAE ARP 4056-1989 旋翼式飞机发动机排气系统的设计考虑 7 页
SAE ARP 4058-1988(R1991) 机械的齿轮转动装置的通用规范 23 页
SAE ARP 4067-1989 适用于FAR/BCAR 第23部分飞机的阴极射线管显示器的设计目标 14 页
SAE ARP 4072-2004 与运输类飞机紧急撤离相关的携带行李的安全考虑 5 页
SAE ARP 4078A-1997 管道镜和纤维镜（柔性管道镜）的贮藏、使用和保养 9 页
SAE ARP 4084A-2006 Aircraft Ground Service Connections Locations and Type 页
SAE ARP 4087A-1996 机翼检测灯的设计准则 5 页
SAE ARP 4087B-2006 Wing Inspection Lights - Design Criteria 页
SAE ARP 4101/1-1990(R1999) 驾驶舱的座位和约束系统 9 页
SAE ARP 4101/2-1989(R2003) 驾驶舱中飞行员的能见度 5 页
SAE ARP 4101/3-1992(R1998) Crew Rest Facilities 页
SAE ARP 4101/4-1988(R2003) 驾驶舱的环境 3 页
SAE ARP 4101/6-1988(R1993) 机组人员的紧急救护和其他设备的装载 页
SAE ARP 4101/7-1988(R2000) 运输机驾驶舱的逃逸措施 4 页
SAE ARP 4101/8-1988(R2000) 运输机驾驶舱的内舱门 3 页
SAE ARP 4101/9-1988(R1993) 货机机组人员的安全措施 页
SAE ARP 4101-1988(R2003) 驾驶舱的布置和设施 6 页
SAE ARP 4102/10A-1993 空中防撞系统 7 页
SAE ARP 4102/1-1988(R2004) 机上载重和平衡系统 3 页
SAE ARP 4102/11C-2002 机载风的切变系统 10 页
SAE ARP 4102/12A-2000 运输机的机载着陆导航系统 5 页
SAE ARP 4102/13A-1993 数据链路 4 页
SAE ARP 4102/14B-2000 完全格式化的打印机 3 页
SAE ARP 4102/15A-2000 电子数据管理系统(EDMS) 12 页
SAE ARP 4102/2-1988(R2004) 自动制动系统(ABS) 3 页
SAE ARP 4102/3-1988(R2003) 驾驶舱的轮胎气压监控系统(TPMS) 2 页
SAE ARP 4102/4-1988(R1999) Flight Deck Alerting System (FAS) 页
SAE ARP 4102/5 SECTION I-1988(R1994) 第1部分 通过电气信号的基本飞行控制 2 页
SAE ARP 4102/7 APPENDIX A-1991(R1999) 附录A 用于EADI/PFD的电子显示器符号 23 页
SAE ARP 4102/7 APPENDIX B-1993(R1999) 附录B 用于EHSI/ND的电子显示器符号 19 页
SAE ARP 4102/7 APPENDIX C-1993(R1999) 附录C 用于发动机显示器的电子显示器符号 20 页
SAE ARP 4102/7-1988(R1999) 电子显示器 8 页
SAE ARP 4102/8A-1998 驾驶舱的平视显示器 9 页
SAE ARP 4102/9A-2001 飞行管理系统(FMS) 35 页
SAE ARP 4102-1988(R1994) 驾驶舱的控制和显示仪表板 12

  SAE航天标准-SAE Aerospace Standards（AS）目录清单

SAE AS 20708/70-1999 Synchro, Torque Receiver Transmitter, Type 37TRX4A FSC 5990; Should Be Used Instead of MIL-S-20708/70D, Which Was Cancelled on 15 September 1999 页
SAE AS 20708/7-1999 Synchro, Control Transformer, Type 26V-11CT4D FSC 5990; Should Be Used Instead of MIL-S-20708/7E, Which Was Cancelled on 15 September 1999 页
SAE AS 20708/74-1999 Synchro, Torque Receiver Transmitter, Type 37TRX6A FSC 5990; Should Be Used Instead of MIL-S-20708/74E, Which Was Cancelled on 15 September 1999 页
SAE AS 20708/76-1999 Synchro, Torque Differential Transmitter, Type 37TDX6A FSC 5990; Should Be Used Instead of MIL-S-20708/76C, Which Was Cancelled on 15 September 1999 页
SAE AS 20708/78-1999 Synchro, Control Transmitter, Type 26V-08CX4C FSC 5990; Should Be Used Instead of MIL-S-20708/78F, Which Was Cancelled on 15 September 1999 页
SAE AS 20708/79-1999 Synchro, Control Transformer, Type 26V-08CT4C FSC 5990; Should Be Used Instead of MIL-S-20708/79F, Which Was Cancelled on 15 September 1999 页
SAE AS 20708/80-1999 Synchro, Control Differential Transmitter, Type 26V-08CDX4C FSC 5990; Should Be Used Instead of MIL-S-20708/80F, Which Was Cancelled on 15 September 1999 页
SAE AS 20708/81-1999 Synchro, Control Differential Transmitter, Type 11CDX4B FSC 5990; Should Be Used Instead of MIL-S-20708/81E, Which Was Cancelled in 15 September 1999 页
SAE AS 20708/8-1999 Synchro, Control Transmitter, Type 26V-11CX4C FSC 5990; Should Be Used Instead of MIL-S-20708/8E, Which Was Cancelled on 15 September 1999 页
SAE AS 20708/9-1999 Synchro, Control Differential Transmitter, Type 26V-11CDX4C FSC 5990; Should Be Used Instead of MIL-S-20708/9E, Which Was Cancelled on 15 September 1999 页
SAE AS 20708/94A-2005 Synchro, 60 and 400 Hz, Size 23 FSC 5990 页
SAE AS 20708-1999 Synchros, General Specification for FSC 5990; Should Be Used Instead of MIL-S-20708, Which Was Cancelled on 15 September 1999 页
SAE AS 2078-1991(R2001) 聚四氟乙烯软管组件的测试方法 17 页
SAE AS 2094-1995(R2001) 用于管-接头组件的测试方法 9 页
SAE AS 20C-1996(R2006) 飞机往复式发动机性能的定义 页
SAE AS 210041-2002 Canister, Lithium Hydroxide, Screened Ends, Friction Type Covers FSC 8110 页
SAE AS 21004-2002 400 Commonwealth Drive, Warrendale, PA 15096-0001 SHEET 1 OF 3 AS21004 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1 FOR 175? TOTAL CONDUCTOR TEMPERATURE FSC 5940 页
SAE AS 21150C-2001 Bearing, Ball, Rod End, Double Row, Precision, Solid Shank, Self-Aligning, Airframe, Type I, -65 Degrees to 300 Degrees F FSC 3110 页
SAE AS 21151C-2001 Bearing, Ball, Rod End, Double Row, Precision, External Thread, Self-Aligning, Airframe, Type II, -65 Degrees to 300 Degrees F FSC 3110 页
SAE AS 21152C-2001 Bearing, Ball, Rod End, Double Row, Precision, Hollow Shank, Self-Aligning, Airframe, Type III, -65 Degrees to 300 Degrees F FSC 3110 页
SAE AS 21153C-2001 Bearing, Ball, Rod End, Double Row, Precision, Internal Thread, Self-Aligning, Airframe, Type IV, -65 Degrees to 300 Degrees F FSC 3110 页
SAE AS 21154A-2005 Bearing, Plain, Self-Aligning, Grooved Outer Ring FSC 3120 页
SAE AS 21155A-2005 BEARING, PLAIN, SELF-ALIGNING, CHAMFERED, OUTER RING FSC 3120 页
SAE AS 21220A-2005 (R) BEARING, ROLLER, ROD END, INTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE II, -67?TO 350?, SEALED FSC 3110 页
SAE AS 21221A-2005 (R) BEARING, ROLLER, ROD END, EXTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE II, -67?TO 350?, SEALED FSC 3110 页
SAE AS 21223A-2005 (R) BEARING, ROLLER, ROD END, EXTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE I, -67?TO 350?, SEALED FSC 3110 页
SAE AS 21230-1998 Bearing, Plain, Self-Aligning, Grooved Outer Ring TFE Lined, Wide FSC 3120; Should Be Used Instead of MS21230B, Which Was Cancelled on 03 May 1999 页
SAE AS 21231-1998 Bearing, Plain, Self-Aligning, TFE Lined, Wide FSC 3120; Should Be Used Instead of MS21231B, Which Was Cancelled on 03 May 1999 页
SAE AS 21232-1998 Bearing, Plain, Self-Aligning, Groove Outer Ring, TFE Lined, Narrow FSC 3120; Should Be Used Instead of MS21232A, Which Was Cancelled on 03 May 1999 页
SAE AS 21233-1998 Bearing, Plain, Self-Aligning, TFE Lined, Narrow FSC 3120; Should Be Used Instead of MS21233B, Which Was Cancelled 03 May 1999 页
SAE AS 21234-1999(R2005) Fitting, Tiedown, Cargo Ring(5,000 LB) and Seat Stud, Type I FSC 1670 页
SAE AS 21235-1999(R2005) Fitting, Tiedown, Cargo Ring (10,000 LB) and Seat Stud, Type II FSC 1670 页
SAE AS 21236-1999(R2005) Ring, Cargo Tiedown (10,000 LB), Type III FSC 1670 页
SAE AS 21237-1999(R2005) Ring, Cargo Tiedown (25,000 LB), Type IV FSC 1670 页
SAE AS 21378-2004 PLUGS AND CABLE ASSEMBLIES, EXTERNAL POWER, AIRCRAFT, 230/400 VOLT, 400 HERTZ FSC 5935/6150 页
SAE AS 21428C-2005 BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, PRECISION 页
SAE AS 21429A-2004 (R) BEARING, ROLLER, ANTIFRICTION, ROD END, EXTERNAL THREAD, SELF-ALIGNING, AIR FRAME, -67 DEGREES F, TO 350 DEGREES F TYPE 1, HEAVY DUTY, SEALED FSC 3110 页
SAE AS 21431A-2003 (R) BEARING, ROLLER, SELF-ALIGNING SINGLE ROW ANTI-FRICTION, SEALED -65 TO 350?, TYPE I FSC 3110; Should Be Used Instead of MS21431A, Which Was Cancelled on 05 April 1999 页
SAE AS 21432-2002 Bearing, Roller, Needle, Track Roller, Integral Stud, Type VII, Antifriction, Inch FCS 3110 页
SAE AS 21438A-2005 (R) BEARING, ROLLER, NEEDLE, SINGLE ROW,HEAVY DUTY, TRACK ROLLER, SEALED, TYPE V ANTIFRICTION, INCH FSC 3110 页
SAE AS 21439A-2005 (R) BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE VI, INCH FSC 3110 页
SAE AS 21440-2002 BEARING, ROLLER, NEEDLE, TRACK ROLLER,INTEGRAL STUD, SEALED, TYPE VIII,ANTIFRICTION, INCH FSC 3110 页
SAE AS 21441A-1999 Bearing, Roller, Needle, Track Roller, Integral Heavy Stud, Type IX, Antifriction, Inch FSC 3110; Should Be Used Instead of MS21441B, Which Was Cancelled on 22 Novmeber 1999 页
SAE AS 21442-1999 Bearing, Roller, Needle, Track Roller, Sealed, Type X, Antifriction, Inch FSC 3110; Should Be Used Instead of MS21442B, Which Was Cancelled on 24 January 2000 页
SAE AS 21443A-2006 (R) Bearing, Ball, Airframe, Anti-Friction, Pulley 页
SAE AS 21447-1998 Bearing, Roller, Needle, Track Roller Crown Radiused O.D. Integral Stud, Type VII Antifriction, Inch FSC 3110; Should Be Used Instead of MS21447A, Which Was Cancelled on 05 April 1999 页
SAE AS 21900B-2003 (R) ADAPTER, FLARELESS TUBE TO A FLARED TUBE FSC 4730 页
SAE AS 21902B-2003 (R) UNION, FLARELESS TUBE FSC 4730 页
SAE AS 21904B-2003 (R) ELBOW, FLARELESS TUBE, 90 FSC 4730 页
SAE AS 21905B-2003 (R) TEE, FLARELESS TUBE FSC 4730 页
SAE AS 21906B-2003 (R) CROSS, FLARELESS TUBE FSC 4730 页
SAE AS 21907B-2003 (R) ELBOW, BULKHEAD UNIVERSAL, 45 DEGREE, FLARELESS TUBE FSC 4730 页
SAE AS 21908C-2003 ELBOW, BULKHEAD UNIVERSAL 90 DEGREE, FLARELESS TUBE FSC 4730 页
SAE AS 21909B-2003 (R) TEE, BULKHEAD AND UNIVERSAL, FLARELESS TUBE FSC 4730 页
SAE AS 21910B-2003 (R) TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON SIDE FSC 4730 页
SAE AS 21911B-2003 (R) TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON RUN FSC 4730 页
SAE AS 21912B-2003 (R) TEE, FLARELESS TUBE WITH BULKHEAD ON RUN FSC 4730 页
SAE AS 21913B-2003 (R) PLUG, FLARELESS TUBE FSC 4730 页
SAE AS 21914B-2003 (R) CAP, PRESSURE SEAL, FLARELESS TUBE FITTING FSC 4730 页
SAE AS 21915B-2003 (R) ADAPTER, STRAIGHT, TUBE TO BOSS FSC 4730 页
SAE AS 21916C-2003 REDUCER, EXTERNAL THREAD, FLARELESS TUBE FSC 4730 页
SAE AS 21919-2000(R2004) CLAMP, LOOP TYPE, CUSHIONED SUPPORT FSC 5340 页
SAE AS 21921A-2003 (R) NUT, SLEEVE COUPLING, FLARELESS FSC 4730; Should Be Used Instead of MS21921, Which Was Cancelled on 13 January 2000 页
SAE AS 21922B-2006 SLEEVE, COUPLING, FLARELESS FSC 4730 页
SAE AS 21923A-2001 Adapter, Flareless Tube, Bulkhead and Universal to Flared Tube FSC 4730 页
SAE AS 21924B-2003 (R) UNION, FLARELESS TUBE, BULKHEAD AND UNIVERSAL FSC 4730 页
SAE AS 21925B-2003 (R) ELBOW, 90 DEGREE UNIVERSAL, FLARELESS TUBE, HIGH PROFILE FSC 4730 页
SAE AS 21926A-2003 (R) ELBOW, 90?UNIVERSAL, FLARELESS TUBE, LOW PROFILE FSC 4730 页
SAE AS 21935-1999(R2004) FITTING END, BOLT CLUSTER FITTING, DOUBLE PORT, THROUGH, FLARELESS FSC 4730; Should Be Used Instead of MS21935C, Which Was Cancelled on 07 September 1999 页
SAE AS 21937-1998(R2004) NUT, CLUSTER FITTING, RETAINER FSC 4730; Should Be Used Instead of MS21937 页
SAE AS 21938-1998(R2004) BOLT, CLUSTER FITTING, SINGLE PORT FLARELESS FSC 4730; Should Be Used Instead of MS21938 页
SAE AS 21939-2000(R2004) BOLT, CLUSTER FITTING, SINGLE PORT, THROUGH, FLARELESS FSC 4730; Should Be Used Instead of MS21939, Which Was Cancelled on 14 September 2000 页
SAE AS 21940-2000(R2004) BOLT, CLUSTER FITTING, DOUBLE PORT, FLARELESS FSC 4730 页
SAE AS 21941-2000(R2004) BBOLT, CLUSTER FITTING, DOUBLE PORT, THROUGH, FLARELESS FSC 4730; Should Be Used Instead of MS21941, Which Was Cancelled on 14 September 2000 页
SAE AS 21942-1998(R2004) BODY, CLUSTER FITTING, ONE WAY, FLARELESS FSC 4730; Should Be Used Instead of MS21942 页
SAE AS 21943-1999(R2004) BODY, CLUSTER FITTING, TWO WAY, 90? FLARELESS FSC 4730 页
SAE AS 21944-2000(R2004) BOLT, CLUSTER FITTING, TWO WAY, 180? FLARELESS FSC 4730; Should Be Used Instead of MS21944, Which Was Cancelled on 14 September 2000 页
SAE AS 21945-1998(R2004) BODY, CLUSTER FITTING, THREE-WAY, FLARELESS FSC 4730; Should Be Used Instead of MS21945 页
SAE AS 21949-1999(R2004) BOLT-CLUSTER FITTING SINGLE PORT-FLARE FSC 1650 页
SAE AS 21984-2004 CIRCUIT BREAKER-AIRCRAFT, TRIP-FREE PUSH-PULL, 3-PHASE, 5 THRU 60 AMP., TYPE I FSC 5925; Amendment 1 - December 2004 页
SAE AS 21985A-1998 Wheels - Cushion Tread (Semi-Pneumatic) for Mobile Ground Support Equipment 页
SAE AS 22073-1999 Circuit Breaker, Trip-Free, Push-Pull, 1/2 Thru 20 AMP, Type I FSC 5925; Amendment 1: 08/2004 页
SAE AS 22074-2004 CIRCUIT BREAKER, RECYCLING, TRIP-FREE, PUSH-PULL, 1/2 THRU 5 AMPERE, TYPE I FSC 5925 页
SAE AS 22145-1999 Accelerometer Group, Counting (MS25447 and MS25448) FSC 6610; Should Be Used Instead of MIL-A-22145C(AS), Which Was Cancelled on 30 August 1999 页
SAE AS 22227-2004 Bearing, Ball, Annular, Generator and Motor Generator 页
SAE AS 22759/10-2000 Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated Copper Conductor, 1000 Volt FSC 6145 页
SAE AS 22759/11-2000 Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated Copper Conductor, 600 Volt FSC 6145 页
SAE AS 22759/1-2000 Wire, Electrical, Fluoropolymer-Insulated, PTFE and PTFE-Coated Glass, Silver-Coated Copper Conductor, 600-Volt FSC 6145 页
SAE AS 22759/12-2000 Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated Copper Conductor, 600 Volt FSC 6145 页
SAE AS 22759/13-2000 Wire, Electrical, Fluoropolymer-Insulated, FEP-PVF2, Medium Weight, Tin-Coated Copper Conductor, 600-Volt FSC 6145 页
SAE AS 22759/14-2000 Wire, Electrical, Fluoropolymer-Insulated, FEP-PVF2, Light weight, Tin-Coated Copper, Conductor, 600-Volt FSC 6145 页
SAE AS 22759/15-2001 Wire, Electric, Fluoropolymer-Insulated, FEP-PVF2, Light Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt FSC 6145 页
SAE AS 22759/16-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Medium Weight, Tin-Coated Copper Conductor, 600-Volt, 150 Degrees C FSC 6145 页
SAE AS 22759/17-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Medium Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt, 150 Degrees C FSC 6145 页
SAE AS 22759/18-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Light Weight, Tin-Coated Copper Conductor, 600-Volt, 150 Degrees C FSC 6145 页
SAE AS 22759/19-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Light Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt, 150 Degrees C FSC 6145 页
SAE AS 22759/20-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated High Strength Copper Alloy Conductor, 1000-Volt FSC 6145 页
SAE AS 22759/21-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated High Strength Copper Alloy Conductor, 1000-Volt FSC 6145 页
SAE AS 22759/2-2000 Wire, Electrical, Fluoropolymer-Insulated, PTFE and PTFE-Coated Glass, Nickel-Coated Copper Conductor, 600-Volt FSC 6145 页
SAE AS 22759/22-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt FSC 6145 页
SAE AS 22759/23-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated High Strength Copper Alloy Conductor, 600-Volt FSC 6145 页
SAE AS 22759/28-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Silver-Coated Copper Conductor, 600-Volt FSC 6145 页
SAE AS 22759/29-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Nickel-Coated Copper Conductor, 600-Volt FSC 6145 页
SAE AS 22759/30-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt FSC 6145 页
SAE AS 22759/31-2001 Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Polyimide Coated, Nickel-Coated High Strength Copper Alloy Conductor, 600-Volt FSC 6145 页
SAE AS 22759/3-2000 Wire, Electric, Fluoropolymer-Insulated, TFE-Glass-TFE, Medium Weight, Nickel-Coated Copper Conductor, 600-Volt FSC 6145 页
SAE AS 22759/32-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Tin-Coated Copper, 150 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/33-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Silver-Coated, High-Strength Copper Alloy, 200 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/34-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Tin-Coated Copper, 150 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/35-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Silver-Coated, High-Strength Copper Alloy, 200 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/41-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Nickel-Coated Copper, 200 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/4-2000 Wire, Electric, Fluoropolymer-Insulated, TFE-Glass-FEP,Medium Weight, Silver-Coated Copper Conductor, 600-Volt FSC 6145 页
SAE AS 22759/42-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Nickel-Coated High-Strength Copper Alloy, 200 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/43-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Silver-Coated Copper, 200 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/44-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Silver-Coated Copper, 200 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/45-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Nickel-Coated Copper, 200 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/46-2000 Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Nickel-Coated High Strength Copper Alloy, 200 Degrees Celsius, 600 Volt FSC 6145 页
SAE AS 22759/5-2000 Wire, Electrical, Fluoropolymer-Insulated, Abrasion Resistant Extruded PTFE, Silver-Coated Copper Conductor, 600 Volt FSC 6145 页
SAE AS 22759/6-2000 Wire, Electrical, Fluorocarbon-Insulated, Abrasion Resistant Extruded PTFE, Nickel-Coated Copper Conductor, 600 Volt FSC 6145 页
SAE AS 22759/7-2000 Wire, Electrical, Fluoropolymer-Insulated, Abrasion Resistant Extruded PTFE, Medium Weight, Silver-Coated Conductor, 600 Volt FSC 6145 页
SAE AS 22759/80A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Tin Coated, Copper Conductor, 150?, 600 Volts FSC 6145 页
SAE AS 22759/81A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Silver Coated, High Strength or Ultra High Strength Copper Alloy, 200?, 600 Volts FSC 6145 页
SAE AS 22759/8-2000 Wire, Electric, Fluoropolymer-Insulated, Abrasion Resistant Extruded PTFE, Medium Weight, Nickel-Coated Copper Conductor, 600 Volt FSC 6145 页
SAE AS 22759/82A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Nickel Coated, High Strength or Ultra High Strength Copper Alloy, 260?, 600 Volts FSC 6145 页
SAE AS 22759/83A-2004 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Silver Coated, Copper Conductor, 200?, 600-Volt FSC 6145 页
SAE AS 22759/84A-2004 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260?, 600-Volt FSC 6145 页
SAE AS 22759/85A-2004 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Tin Coated Copper Conductor, 150?, 600-Volt FSC 6145 页
SAE AS 22759/86A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Silver Coated, Copper Conductor, 200 ?, 600 Volts FSC 6145 页
SAE AS 22759/87A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260?, 600 Volts FSC 6145 页
SAE AS 22759/88A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Tin Coated, Copper Conductor, 150?, 600 Volts FSC 6145 页
SAE AS 22759/89A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Silver Coated, High Strength or Ultra High Strength Copper Alloy, 200?, 600 Volts FSC 6145 页
SAE AS 22759/90A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, High Strength or Ultra High Strength Copper Alloy, 260?, 600 Volts FSC 6145 页
SAE AS 22759/91A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Silver Coated, Copper Conductor, 200 ?, 600 Volts FSC 6145 页
SAE AS 22759/9-2000 Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated Copper Conductor, 1000 Volt FSC 6145 页
SAE AS 22759/92A-2004(R2006) Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Light Weight, Nickel Coated, Copper Conductor, 260?, 600 Volts FSC 6145 页
SAE AS 22805-1999 Spray Kit, Self Pressurized FSC 4940; Should Be Used Instead of MIL-S-22805, Which Was Cancelled on 30 August 1999 页
SAE AS 23003-1998(R2003) Gages - Inspection for MS23002 Crimping Dies (for Use with MS25036 Insulated Terminals) FSC 5220 页
SAE AS 23190/1-1999 Straps, Clamps, and Mounting Hardware, Plastic for Cable Harness Tying and Support Clamp, Loop, Nylon, Adjustable, Wire Support, Type III, Class 1 FSC 5340; Should Be Used Instead of MIL-S-23190/1A, Which Was Cancelled on 27 September 1999 页
SAE AS 23190/2-1998(R2003) Straps, Clamps, Plastic and Metal, and Mounting Hardware, Plastic for Cable Harness Tying and Support Clamp, Loop, Metal, Cushioned, Adjustable, Wire Support, Type V, Class 1 FSC 5975; Should Be Used for New Design Instead of MIL-S-23190/2, Which Was In 页
SAE AS 23190/3-1999(R2004) Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support Strap, Tie down, Adjustable, Corrosion Resistant Steel Type VI, Class 1 FSC 5975 页
SAE AS 23190-1998 Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support FSC 5975; Amendment 2 - January 2006 页
SAE AS 234-1948(R2001) 热敏元件（测温电阻器型） 1 页
SAE AS 23479-1999 Indicator, Pressure, 1 1/2-Inch, Integrally Lighted FSC 6620; Should Be Used Instead of MIL-I-23479B(1), Which Was Cancelled on 16 August 1999 页
SAE AS 236-1948(R2001) 热敏元件的适配器 1 页
SAE AS 23899-1999 Aural Protector, Sound FSC 4240; Should Be Used Instead of MIL-A-23899B(AS), Which Was Cancelled on 30 August 1999 页
SAE AS 24000-1999 Fuse Holder, Block-Type, 1-, 2-, and 3-Pole, 1- to 30-Ampere, Aircraft FSC 5920; Should Be Used Instead of MS24000F, Which Was Cancelled on 13 September 1999 页
SAE AS 24001-1999 Fuse Holder, Block-Type, 1-, 2-, and 3-Pole, 35- to 60-Ampere, Aircraft FSC 5920; Should Be Used Instead of MS24001F, Which Was Cancelled on 13 September 1999 页
SAE AS 24122-2004 WIRING HARNESS - EXTERNAL POWER, 115 VOLT AC, SINGLE PHASE FSC 6150 页
SAE AS 24208-2004 CABLE AND PLUG ASSEMBLY, EXTERNAL POWER 115/200 VOLTS 3 PHASE, SINGLE POINT REFUELING FSC 6150 页
SAE AS 24333B-2005 Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect, Flared Fitting to Internal Thread Boss FSC 4730; Should Be Used Instead of MS24333 页
SAE AS 24334B-2005 Coupling Assembly, Hydraulic, Self-Sealing, Flareless Fitting to Internal Thread Boss FSC 4730; Should Be Used Instead of MS24334 页
SAE AS 24335-2001(R2005) Flange, Bulkhead Mounting, Hydraulic Self-Sealing Coupling FSC 4730 页
SAE AS 24347-2001 Drums, Metal, Reusable Shipping and Storage FSC 5110 页
SAE AS 24405-1999(R2004) ADAPTER, FLARELESS TUBE TO FLARED TUBE PRECISION TYPE FSC 4730; Should Be Used Instead of MS24405, Which Was Cancelled on 1 August 1999 页
SAE AS 24461B-1999 Bearing, Roller, Needle, Single Row, Heavy Duty, Type I, Antifriction, Inch FSC 3110 页
SAE AS 24462A-2005 (R) BEARING, ROLLER, NEEDLE, SINGLE ROW, THIN SHELL, TYPE II, ANTIFRICTION FSC 3110 页
SAE AS 24463B-2005 (R) BEARING, ROLLER, NEEDLE-SINGLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE III, ANTIFRICTION, INCH FSC 3110 页
SAE AS 24464A-2005 (R) BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE IV, ANTIFRICTION, INCH FSC 3110 页
SAE AS 24465-2002 Bearing, Roller, Needle-Single Row, Heavy Duty, Track Roller, Type V, Antifriction, Inch FSC 3110 页
SAE AS 24466-2002 Bearing, Roller, Needle-Double Row, Heavy Duty, Track Roller, Type VI, Antifriction, Inch FSC 3110 页
SAE AS 24509-1999 Circuit Breaker Aircraft, Trip-Free, Toggle, 5 Thru 15 AMP, Type l Amendment 2 - November 2004 页
SAE AS 24510-1999 Circuit Breaker Aircraft, Trip Free, Push-Pull, 5 Thru 15 AMP, Type l Amendment 2 - November 2004 页
SAE AS 24563B-2005 FLANGE PROFILES, V-COUPLING, DESIGN STANDARD FSC 5342 页
SAE AS 24585B-2003 SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS FSC 5360 页
SAE AS 24586-2001(R2006) Spring, Helical, Extension: for Loads Below 30 Pounds FSC 5360 页
SAE AS 245B-2000 水溶液型手持式灭火器 6 页
SAE AS 24651-1999(R2004) ELBOW, TUBE - 90? BULKHEAD, FLARELESS TUBE UNIVERSAL TO FLARED TUBE FSC 4730; Should Be Used Instead of MS24651, Which Was Cancelled on 2 August 1999 页
SAE AS 24652-1999(R2004) ELBOW, TUBE - 90? BULKHEAD, FLARED TUBE, UNIVERSAL TO FLARELESS TUBE FSC 4730; Should Be Used Instead of MS24652, Which Was Cancelled on 2 August 1999 页
SAE AS 24654-1999(R2004) ELBOW, TUBE - 45? BULKHEAD, FLARELESS TUBE UNIVERSAL TO FLARED TUBE FSC 4730; Should Be Used Instead of MS24654, Which Was Cancelled on 1 August 1999 页
SAE AS 25019-1999(R2005) Cable Assembly, External Electric Power, Aircraft, 28 Volt DC, Jet Starting FSC 6150 页
SAE AS 25027-1999(R2006) LIGHT ASSEMBLY, COCKPIT, FIXED FSC 6220 页
SAE AS 25036-1998(R2004) TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1, (FOR 105? TOTAL CONDUCTOR TEMPERATURE) FSC 5940 页
SAE AS 25042-2004 COVER, ELECTRICAL CONNECTOR; PLUG, AN TYPE FSC 5935 页
SAE AS 25043-2004 COVER, ELECTRICAL CONNECTOR, RECEPTACLE, AN TYPE FSC 5935 页
SAE AS 25050-1998(R2006) Colors, Aeronautical Lights and Lighting Equipment, General Requirements for FSC 6220; Supersedes MIL-C-25050A(2) 页
SAE AS 25064-1999 Conduit, Flexible, Radio Frequency Shielding FSC 5975 页
SAE AS 25065-2004 FERRULE, FLEXIBLE CONDUIT, RADIO FREQUENCY SHIELDING 页
SAE AS 25067-2004 CONDUIT ASSEMBLY, FLEXIBLE, RADIO FREQUENCY SHIELDING FSC 5975 页
SAE AS 25109-1999(R2005) Engines, Aircraft, Reciprocating, General Specification for FSC 2810 页
SAE AS 25183-2004 CONNECTOR, PLUG, ELECTRIC, POTTING SEAL, SOLDER CONTACT, AN TYPE FSC 5935 页
SAE AS 25226-1998(R2003) Link, Terminal, Connecting FSC 5940; Should Be Used Instead of MS25226, which Was Cancelled on 31 August, 1998 页
SAE AS 25281A-2005 Clamp, Loop, Plastic, Wire Support FSC 5340; Should Be Used Instead of MS25281, Which Was Cancelled on 29 October 1999 页
SAE AS 25337-2004 CIRCUIT BREAKER, AIRCRAFT TRIP-FREE TOGGLE, 5-50 AMP FSC 5925 页
SAE AS 25427-2004 Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect FSC 4730 页
SAE AS 25435-2000 Terminal-Lug, Crimp Style, Straight Type, for Aluminum Aircraft Wire, Class 1 FSC 5940 页
SAE AS 25436-2000 Terminal-Lug, Crimp Style, 90 Degree Upright Type, for Aluminum Aircraft Wire, Class 1 FSC 5940 页
SAE AS 25438-2002 TERMINAL-LUG, CRIMP STYLE, RIGHT ANGLE TYPE, FOR ALUMINUM AIRCRAFT WIRE,CLASS 1 FSC 5940 页
SAE AS 25439-2000 Splice-Permanent Crimp Style, 2 Way Type for Aluminum Aircraft Wire, Class 1 FSC 5940 页
SAE AS 25442-2002 DIES, FOR MS25441, HYDRAULIC CRIMPING, TOOL (FOR USE WITH ALUMINUM WIRE TERMINALS) FSC 5120 页
SAE AS 25472-2002 GAGE, IN-SERVICE-INSPECTION, FOR USE WITH MS25442 CRIMPING DIES(FOR USE WITH ALUMINUM WIRE TERMINALS) FSC 5220 页
SAE AS 25481-1997 Cable Assemblies, Electric Power, for Portable Ground Support Test Equipment 页
SAE AS 25487-2004 CONNECTOR, PLUG, ATTACHABLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, JET STARTING FSC 5935 页
SAE AS 25488-2004 CONNECTOR, PLUG, ATTACHABLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, OPERATING POWER FSC 5935 页
SAE AS 264E-2001(R2004) 商用运输机的仪表和驾驶舱照明 9 页
SAE AS 26574-2004 CIRCUIT BREAKER - TRIP-FREE, PUSH-PULL, 1/2 THRU 20 AMP, TYPE I FSC 5925; Amendment 1 - November 2004 页
SAE AS 26805-2001 Compressor Units, Air/Gas, General Requirements for 页
SAE AS 26860-1998 Indicator, Humidity, Plug, Color Change 页
SAE AS 269H-1996(R2006) 用于AN,MS,和AS发动机和螺旋桨的标准通用零件和自制零件的材料鉴定 页
SAE AS 27166-1998 Valve, Pressure Equalizing, Gaseous Products 页
SAE AS 27194-2001 Seal, Plain, Rubber, (-65 to + 160 Degrees F Fuel Resistant), Mold in Groove FSC 5330 页
SAE AS 27195-2001 Seal, Plain, Rubber, Synthetic Oil Resistant, (-65 to + 275 Degree F), Mold in Groove FSC 5330 页
SAE AS 27196-2001 Gasket, Rubber, Fluid Resistant, Oils, Synthetic Oils and Fuels, (-65 to + 400 Degrees F), Mold in Groove FSC 5330 页
SAE AS 27197-2001 Seal, Plain, Rubber, (Hot Air Resistant 400 Degree F), Mold in Groove FSC 5330 页
SAE AS 27212-1998(R2003) Terminal Board Assembly, Molded-In-Stud, Electric FSC 5940; Should Be Used Instead of MS27212, which Was Cancelled on 31 August, 1998 页
SAE AS 27429-2000 Splice, Conductor, Disconnect, Crimp Style, Copper, Insulated Barrel, Type II, Class 1 for 105 Degrees C Total Conductor Temperature FSC 5940 页
SAE AS 27444-2000 Net, Cargo Tiedown, Pallets, HCU-7/E, HCU-15/C, HCU-11/C, and HCU-16/C 页
SAE AS 27488-2004 PLUG, END SEAL, ELECTRICAL CONNECTOR FSC 5935 页
SAE AS 27640B-2002 (R) Bearing, Ball, Airframe, Anti-Friction, Heavy Duty 页
SAE AS 27641B-2002 (R) Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty 页
SAE AS 27642B-2002 (R) Bearing, Ball, Airframe, Extra Light Duty Should Be Used Instead of MS27642G, Which Was Cancelled on 23 July 1998; FSC 3110 页
SAE AS 27643B-2002 (R) Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Double Row, Heavy Duty 页
SAE AS 27644B-2002 (R) Bearing, Ball, Airframe, Anti-Friction, Double Row, Heavy Duty 页
SAE AS 27645B-2002 (R) Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Light and Heavy Duty FSC 3110; Should Be Used Instead of MS27645E, Which Was Cancelled on 23 July 1998 页
SAE AS 27646B-2002 (R) Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty 页
SAE AS 27647B-2002 (R) Bearing, Ball, Airframe, Anti-Friction, Extra Wide, Double Row, Intermediate Duty FSC 3110; Should Be Used Instead of MS27467F, Which Was Cancelled on 23 July 1998 页
SAE AS 27648B-2002 (R) Bearing, Ball, Airframe, Anti-Friction, External Self Aligning, Extra Light Duty 页
SAE AS 27649B-2002 (R) Bearing, Ball, Airframe, Antifriction, Intermediate Duty FSC 3110 页
SAE AS 27683-2001 Drums, Metal - Shipping and Storage 16 to 80 Gallons FSC 8110 页
SAE AS 27684-2001 Drums, Metal - Shipping and Storage 3 to 12 Gallons FSC 8110 页
SAE AS 28431-2003 Aerospace Signaling Torque Wrenches 页
SAE AS 28775-2000 Packing, Preformed, Hydraulic, +275 Degrees F ("O"Ring) FSC 5331 页
SAE AS 28778-2001 Packing, Preformed, Straight Thread Tube Fitting Boss FSC 5331 页
SAE AS 28889-1999 Valve, Air, High Pressure Charging, 5000 psi FSC 4820 页
SAE AS 28913B-2003 (R) BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE II FSC 3110; Should Be Used Instead of MS28913D, Which Was Cancelled on 02 September 1998 页
SAE AS 28914B-2003 (R) BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE III FSC 3110; Should Be Used Instead of MS28914D, Which Was Cancelled on 02 September 1998 页
SAE AS 28915B-2005 (R) BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW TORQUE TUBE, AIRFRAME, ANTI-FRICTION, SEALED, TYPE IV FSC 3110 页
SAE AS 28937-2002 FUSE, LIMITER TYPE, ENCLOSED LINK,5-60 AMP, AIRCRAFT FSC 5920 页
SAE AS 28938-2002 FUSE, LIMITER TYPE, ENCLOSED LINK, INTERMEDIATE RATING, AIRCRAFT FSC 5920 页
SAE AS 28B-1987(R1992) 飞机发动机的火花塞 7 页
SAE AS 29512-2001 Packing, Preformed, Hydocarbon Fuel Resistant, Tube Fittings,"O" Ring FSC 5331 页
SAE AS 29513-2001 Packing, Preformed, Hydocarbon Fuel Resistant,"O" Ring FSC 5331 页
SAE AS 29561-2001 Packing, Preformed,"O" Ring, Synthetic Lubricant Resistant FSC 5331 页
SAE AS 29600/10-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, RECEPTACLE, FLANGED (SERIES A) FSC 5935 页
SAE AS 29600/11-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, RECEPTACLE, JAM NUT (SERIES A) FSC 5935 页
SAE AS 29600/1-1998(R2003) CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, SEALING PLUG, SIZE 8, (SERIES A) FSC 5935 页
SAE AS 29600/12-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, PLUG (SERIES A) FSC 5935 页
SAE AS 29600/20-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, RECEPTACLE, FLANGED (SERIES B) FSC 5935 页
SAE AS 29600/21-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, RECEPTACLE, JAM NUT (SERIES B) FSC 5935 页
SAE AS 29600/2-1998(R2003) CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, BACKSHELL, SHIELD TERMINATING, (SERIES A AND B) FSC 5935 页
SAE AS 29600/22-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, PLUG (SERIES B) FSC 5935 页
SAE AS 29600/23-1998(R2003) CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, CONTACTS, SOCKET, CRIMP REMOVABLE, (FOR MIL-C-29600 SERIES B) FSC 5935 页
SAE AS 29600/24-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, CONTACTS, PIN, CRIMP REMOVABLE, (SERIES B) FSC 5935 页
SAE AS 29600/3-2004 CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENTAL RESISTANT, REMOVABLE CRIMP CONTACTS, BACKSHELL 90? SELF LOCKING (SERIES A AND B) FSC 5935 页
SAE AS 29600/4-2004 CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENTAL RESISTANT, REMOVABLE CRIMP CONTACT, BACKSHELL 45? SELF LOCKING (SERIES A AND B) FSC 5935 页
SAE AS 29600/5-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, SELF LOCKING, ENVIRONMENTAL RESISTANT, REMOVABLE CRIMP CONTACTS, DUST COVER (SERIES A) FSC 5935 页
SAE AS 29600/6-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENTAL RESISTANT, REMOVABLE CRIMP CONTACTS, STOWAGE RECEPTACLE (SERIES B) FSC 5935 页
SAE AS 29600/7-2004 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, THREADED, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, NUT, HEXAGON, CONNECTOR MOUNTING FSC 5935 页
SAE AS 29600-2004 Connectors, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts Associated Hardware, General Specification For FSC 5935 页
SAE AS 3000-1963(R2005) 机械螺纹塞--AMS 5646 缩径螺纹金属垫片 页
SAE AS 3001-1963(R2005) 机械螺纹塞--AMS 5646 缩径螺纹镀银的金属垫片 页
SAE AS 3040A-1969(R2001) 多管道可分离衬垫夹具的安装 1 页
SAE AS 3062C-1979(R2006) 螺栓、螺钉和柱螺栓的螺纹要求 页
SAE AS 3063B-1996(R2006) 螺栓、螺钉和柱螺栓的几何控制要求 页
SAE AS 3067B-1997(R2004) AS 7251 缩径封套、双六角形的自锁螺母 3 页
SAE AS 3068A-1978(R2001) AMS 7251 缩径封套、双六角形的自锁螺母 2 页
SAE AS 3068A-1978(R2006) AMS 7251 缩径封套、双六角形的自锁螺母 页
SAE AS 3069-1979(R2001) AMS 7251 缩径封套、双六角形的自锁螺母 2 页
SAE AS 3069-1979(R2006) AMS 7251 缩径封套、双六角形的自锁螺母 页
SAE AS 3070-1976(R2001) AMS 7251 缩径封套、双六角形的自锁螺母 2 页
SAE AS 3070-1976(R2006) AMS 7251 缩径封套、双六角形的自锁螺母 页
SAE AS 307-1946(R2006) Cover, Flight - Governor Mounting Pad 页
SAE AS 3071B-2000(R2004) 磁性粒子、荧光渗透剂和对比染色渗透剂检查的验收准则 10 页
SAE AS 3076-1970(R2001) 凸台连接用的聚四氟乙烯支承环 1 页
SAE AS 3077A-2004 内直螺纹液压连接凸台螺套的密封圈 2 页
SAE AS 3078B-2006 (R) FITTING, INSERT, FLUID CONNECTION, MS33649 BOSS TO RING LOCKED BOSS FSC 4730 页
SAE AS 3080-1973(R2001) 1.5公称直径长度、直柱螺栓锁定的螺旋状线圈、细螺纹、耐腐蚀钢螺套 2 页
SAE AS 3080-1973(R2006) I NSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT STUD LOCKING, 1.5 DIA NOM LENGTH FSC 5340 页
SAE AS 3081-1973(R2001) 2公称直径长度、直柱螺栓锁定的螺旋状线圈、细螺纹、耐腐蚀钢螺套 2 页
SAE AS 3081-1973(R2006) Insert - CRES Helical Coil Fine Thread, Straight Stud Locking, 2 Dia Nom Length FSC 5340 页
SAE AS 3082-1973(R2001) 2.5公称直径长度、直柱螺栓锁定的螺旋状线圈、细螺纹、耐腐蚀钢螺套 2 页
SAE AS 3082-1973(R2006) Insert - CRES Helical Coil Fine Thread, Straight Stud Locking, 2.5 Dia Nom Length FSC 5340 页
SAE AS 3083-1973(R2001) 3公称直径长度、直柱螺栓锁定的螺旋状线圈、细螺纹、耐腐蚀钢螺套 2 页
SAE AS 3083-1973(R2006) Insert - CRES Helical Coil Fine Thread, Straight Stud Locking, 3 Dia Nom Length FSC 5340 页
SAE AS 3084-1974(R2001) AMS 7280 预成型的密封圈 1 页
SAE AS 3085-1974(R2001) AMS 7280 预成型的O形环密封圈 6 页
SAE AS 3085-1974(R2006) Packing, Preformed - AMS 7280,'O' Ring 页
SAE AS 3086-1975(R2001) .190-32 UNJF X .190-32 UNJF 键锁定的钢直柱螺栓 2 页
SAE AS 3086-1975(R2006) .190-32 UNJF X .190-32 UNJF 键锁定的钢直柱螺栓 页
SAE AS 3087-1975(R2001) .250-28 UNJF X .250-28 UNJF 键锁定的钢直柱螺栓 2 页
SAE AS 3087-1975(R2006) .250-28 UNJF X .250-28 UNJF 键锁定的钢直柱螺栓 页
SAE AS 3088-1975(R2001) .3125-24 UNJF X .3125-24 UNJF 键锁定的钢直柱螺栓 2 页
SAE AS 3088-1975(R2006) .3125-24 UNJF X .3125-24 UNJF 键锁定的钢直柱螺栓 页
SAE AS 3089-1975(R2001) .375-24 UNJF X .375-24 UNJF 键锁定的钢直柱螺栓 2 页
SAE AS 3089-1975(R2006) .375-24 UNJF X .375-24 UNJF 键锁定的钢直柱螺栓 页
SAE AS 3090-1975(R2001) AMS 5731 .190-32 UNJF X .190-32 UNJF 键锁定的耐腐蚀钢直柱螺栓 3 页
SAE AS 3090-1975(R2006) AMS 5731 .190-32 UNJF X .190-32 UNJF 键锁定的耐腐蚀钢直柱螺栓 页
SAE AS 3091-1975(R2001) AMS 5731 .250-28 UNJF X .250-28 UNJF 键锁定的耐腐蚀钢直柱螺栓 2 页
SAE AS 3091-1975(R2006) AMS 5731 .250-28 UNJF X .250-28 UNJF 键锁定的耐腐蚀钢直柱螺栓 页
SAE AS 3092-1975(R2001) AMS 5731 .3125-24 UNJF X .3125-24 UNJF 键锁定的耐腐蚀钢直柱螺栓 2 页
SAE AS 3092-1975(R2006) STUD - STRAIGHT, KEY LOCKED, CRES AMS 5731 .3125-24 UNJF X .3125-24 UNJF 页
SAE AS 3093-1975(R2001) AMS 5731 .375-24 UNJF X .375-24 UNJF 键锁定的耐腐蚀钢直柱螺栓 2 页
SAE AS 3093-1975(R2006) STUD - STRAIGHT, KEY LOCKED, CRES AMS 5731 .375-24 UNJF X .375-24 UNJF 页
SAE AS 3094-1974(R2001) 1.5公称直径长度、锁定的螺旋状线圈、细螺纹、耐腐蚀钢螺套（低摩擦系统） 2 页
SAE AS 3094-1974(R2006) INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 1.5 DIA NOM LENGTH FSC 5340 页
SAE AS 3095-1974(R2006) 2公称直径长度、锁定的螺旋状线圈、细螺纹、耐腐蚀钢螺套（低摩擦系统） 页
SAE AS 3096-1974(R2006) 2.5公称直径长度、锁定的螺旋状线圈、细螺纹、耐腐蚀钢螺套（低摩擦系统） 页
SAE AS 3097-1974(R2006) 3公称直径长度、锁定的螺旋状线圈、细螺纹、耐腐蚀钢螺套（低摩擦系统） 页
SAE AS 3098-1979(R2006) AMS 5731, .164-36 UNJF-3A 六角头PD杆耐腐蚀钢机械螺钉 页
SAE AS 3099-1979(R2006) AMS 5731, .190-32 UNJF-3A 六角头PD杆耐腐蚀钢机械螺栓 页
SAE AS 31001-2004 CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE FSC 5935 页
SAE AS 3100-1979(R2006) Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .250-28 UNJF-3A FSC 5306 页
SAE AS 31011-2004 CONNECTOR, PLUG, ELECTRIC, CABLE CONNECTING, SOLDER CONTACTS, AN TYPE FSC 5935 页
SAE AS 3101-1979(R2006) Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .3125-24 UNJF-3A FSC 5306 页
SAE AS 31021-2004 CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, SOLDER CONTACTS, AN TYPE FSC 5935 页
SAE AS 3102-1979(R2006) Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .375-24 UNJF-3A FSC 5306 页
SAE AS 31031-2004 CONNECTOR, RECEPTACLE, ELECTRIC, POTTING SEAL, SOLDER CONTACTS, AN TYPE FSC 5935 页
SAE AS 3103-1979(R2006) Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .4375-20 UNJF-3A FSC 5306 页
SAE AS 3104-1979(R2006) AMS 5731, .500-20 UNJF-3A 六角头PD杆耐腐蚀钢机械螺栓 页
SAE AS 31051-2004 CONNECTOR, RECEPTACLE, ELECTRIC, DUMMY STOWAGE FSC 5935 页
SAE AS 3105-1979(R2004) AMS 5731, .5625-18 UNJF-3A 六角头PD杆耐腐蚀钢机械螺栓 2 页
SAE AS 31061-2004 CONNECTOR, PLUG, ELECTRIC, STRAIGHT, SOLDER CONTACTS, AN TYPE FSC 5935 页
SAE AS 3106-1979(R2004) AMS 5731, .164-36 UNJF-3A 六角头、1个钻孔、PD杆耐腐蚀钢机械螺钉 2 页
SAE AS 31071-2004 CONNECTOR PLUG, ELECTRIC, QUICK DISCONNECT FSC 5935 页
SAE AS 3107-1979(R2004) AMS 5731, .190-32 UNJF-3A 六角头、1个钻孔、PD杆耐腐蚀钢机械螺栓 2 页
SAE AS 31081-2004 CONNECTORS, PLUG, ELECTRIC, SOLDER CONTACT, 90 DEGREE, AN TYPE FSC 5935 页
SAE AS 3108-1979(R2004) AMS 5731, .250-28 UNJF-3A 六角头、1个钻孔、PD杆耐腐蚀钢机械螺栓 2 页
SAE AS 3109-1979(R2006) AMS 5731, .3125-24 UNJF-3A 六角头、1个钻孔、PD杆耐腐蚀钢机械螺栓 页
SAE AS 31091A-1998 Boots, Heat-Shrinkable, Strain-Relief, Straight FSC 5970 页
SAE AS 3110-1979(R2006) AMS 5731, .375-24 UNJF-3A 六角头、1个钻孔、PD杆耐腐蚀钢机械螺栓 页
SAE AS 3111-1979(R2004) AMS 5731, .4375-20 UNJF-3A 六角头、1个钻孔、PD杆耐腐蚀钢机械螺栓 2 页
SAE AS 3112-1979(R2006) AMS 5731, .500-20 UNJF-3A 六角头、1个钻孔、PD杆耐腐蚀钢机械螺栓 页
SAE AS 3113-1979(R2006) AMS 5731, .5625-18 UNJF-3A 六角头、1个钻孔、PD杆耐腐蚀钢机械螺栓 页
SAE AS 3114-1979(R2004) AMS 5731, .190-32 UNJF-3A 六角头、6个钻孔、PD杆耐腐蚀钢机械螺栓 2 页
SAE AS 3115-1979(R2006) AMS 5731, .250-28 UNJF-3A 六角头、6个钻孔、PD杆耐腐蚀钢机械螺栓 页
SAE AS 3116-1979(R2006) AMS 5731, .3125-24 UNJF-3A 六角头、6个钻孔、PD杆耐腐蚀钢机械螺栓 页
SAE AS 3117-1979(R2004) AMS 5731, .375-24 UNJF-3A 六角头、6个钻孔、PD杆耐腐蚀钢机械螺栓 2 页
SAE AS 31171A-1998(R2003) BOOTS, HEAT-SHRINKABLE, STRAIN-RELIEF, RIGHT ANGLE FSC 5970 页
SAE AS 3118-1979(R2004) AMS 5731, .4375-20 UNJF-3A 六角头、6个钻孔、PD杆耐腐蚀钢机械螺栓 2 页
SAE AS 3119-1979(R2004) AMS 5731, .500-20 UNJF-3A 六角头、6个钻孔、PD杆耐腐蚀钢机械螺栓 2 页
SAE AS 3120-1979(R2004) AMS 5731, .5625-18 UNJF-3A 六角头、6个钻孔、PD杆耐腐蚀钢机械螺栓 2 页
SAE AS 3121-1981(R2006) Plug, Expansion - Aluminum, 2024-T4, Long; Std and .010 Oversize Diameters FSC 5315 页
SAE AS 3122-1981(R2003) 长的2024-T4铝膨胀销 1 页
SAE AS 3123-1981(R2006) Plug, Expansion - Aluminum, 2024-T4, Short; Std and .010 Oversize Diameters FSC 5315 页
SAE AS 3124-1981(R2006) 短的2024-T4铝膨胀销 页
SAE AS 3125-1981(R2006) 长的416耐腐蚀钢膨胀塞（标准和.010特大直径） 页
SAE AS 3126-1981(R2003) 长的416耐腐蚀钢膨胀销 1 页
SAE AS 3127-1981(R2006) Plug, Expansion - CRES, 416, Short; Std and .010 Oversize Diameters FSC 5315 页
SAE AS 3128-1981(R2006) Pin, Expansion - CRES, 416, Short FSC 5315 页
SAE AS 3129-1981(R2006) Plug, Expansion - CRES, 303, Long; Std and .010 Oversize Diameters FSC 5315 页
SAE AS 31301-2004 CONNECTOR, RECEPTACLE, ELECTRIC, SOLDER TYPE, WALL MTG. FLANGE, PUSH-PULL COUPLING, SERIES 1 (CLASS E, P AND J) FSC 5935 页
SAE AS 3130-1981(R2006) Pin, Expansion - CRES, 303, Long FSC 5315 页
SAE AS 3131-1981(R2006) 短的303耐腐蚀钢膨胀塞（标准和.010特大直径） 页
SAE AS 31321-2004 CONNECTOR, RECEPTACLE, ELECTRIC, SOLDER TYPE, BOX MOUNTING FLANGE, PUSH-PULL COUPLING, SERIES 1 (CLASS E AND H) FSC 5935; Amendment 1: 09/2004 页
SAE AS 3132-1981(R2006) Pin, Expansion - CRES, 303, Short FSC 5315 页
SAE AS 31341-2004 CONNECTOR, RECEPTACLE, ELECTRIC, SOLDER TYPE, JAM NUT MOUNTING, PUSH-PULL, COUPLING, SERIES 1 (CLASS E, P, J AND H) FSC 5935 页
SAE AS 31351-2004 CONNECTOR, RECEPTACLE, ELECTRIC, DUMMY STOWAGE, WALL MOUNTING FLANGE, PUSH-PULL COUPLING (SERIES 1 AND 2 CONNECTORS) FSC 5935 页
SAE AS 31371A-1998(R2003) CONNECTOR, PLUG, ELECTRIC, SOLDER TYPE, PUSH-PULL COUPLING SERIES 1 (CLASS E, P AND J) FSC 5935 页
SAE AS 31381-2004 CONNECTOR, PLUG, ELECTRIC, SOLDER TYPE LANYARD, PUSH-PULL COUPLING, SERIES 1 (CLASS E, P, AND J) FSC 5935 页
SAE AS 31401-2004 CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, WALL MOUNTING FLANGE, PUSH-PULL, COUPLING, SERIES 2 (CLASS E AND J) FSC 5935 页
SAE AS 31441-2004 CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, JAM NUT MOUNTING, PUSH-PULL, COUPLING, SERIES 2 (CLASS E AND J) FSC 5935 页
SAE AS 3144-1976(R2001) AMS 5731 .5625-18 UNJF-3A X .500-20 UNJF-3A PD杆、2.5直径啮合的阶梯状柱螺栓 1 页
SAE AS 31461-2004 CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, CRIMP TYPE, SOLDER MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS N) FSC 5935 页
SAE AS 31471-2004 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL COUPLING, SERIES 2 (CLASS E AND J) FSC 5935 页
SAE AS 3147-1976(R2006) Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .190-32 UNJF-3A FSC 5306 页
SAE AS 31481-2004 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, LANYARD, PUSH-PULL COUPLING, SERIES 2 (CLASS E AND J) FSC 5935; Amendment 1: 09/2004 页
SAE AS 3148-1976(R2006) Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .250-28 UNJF-3A FSC 5306 页
SAE AS 31491-2004 CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, CRIMP TYPE, SINGLE HOLE MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS N) FSC 5935 页
SAE AS 3149-1976(R2006) Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .3125-24 UNJF-3A FSC 5306 页
SAE AS 3150-1976(R2006) AMS 4967, .375-24 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 页
SAE AS 3151-1976(R2001) AMS 4967, .4375-20 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3152-1976(R2004) AMS 4967, .500-20 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 3 页
SAE AS 3153-1976(R2001) AMS 4967, .5625-18 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 31551-2004 CONNECTOR, ELECTRIC, REAR ACCESSORY DESIGN STANDARD FSC 5935 页
SAE AS 3156-1976(R2001) AMS 4967, .190-32 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3157-1976(R2001) AMS 4967, .250-28 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3158-1976(R2001) AMS 4967, .3125-24 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3159-1976(R2001) AMS 4967, .375-24 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3160-1976(R2001) AMS 4967, .4375-20 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3161-1976(R2001) AMS 4967, .500-20 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3162-1976(R2001) AMS 4967, .5625-18 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3163-1975(R2006) AMS 6322, MIL-S-8879 键垫圈锁定外径槽的平螺母 页
SAE AS 3166-1975(R2005) 连接管锥形端的AMS 5646耐腐蚀钢管接头 页
SAE AS 3167-1976(R2001) AMS 5643, .190-32 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3168-1976(R2001) AMS 5643, .250-28 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3169-1976(R2001) AMS 5643, .3125-24 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3170-1976(R2001) AMS 5643, .375-24 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3171-1976(R2001) AMS 5643, .4375-20 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3172-1976(R2001) AMS 5643, .500-20 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3173-1976(R2001) AMS 5643, .5625-18 UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3174-1976(R2001) AMS 5643, .190-32 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3175-1976(R2001) AMS 5643, .250-28, UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3176-1976(R2001) AMS 5643, .3125-24 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3177-1976(R2001) AMS 5643, .375-24 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3178-1976(R2001) AMS 5643, .4375-20 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3179-1976(R2001) AMS 5643, .500-20 UNJF-3A 紧公差杆、钻孔、双六角扩展垫圈头的机械螺栓 2 页
SAE AS 3180-1976(R2006) BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CL TOL SHANK, AMS 5643, .5625-18 UNJF-3A 页
SAE AS 31821-2004 COVER, PROTECTIVE, ELECTRONIC CONNECTOR, PLUG, PUSH-PULL COUPLING FSC 5935 页
SAE AS 31971-1997(R2003) GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST FSC 5220 页
SAE AS 3208-1976(R2004) AMS 7276 预成型的密封圈 1 页
SAE AS 3209-1976(R2004) AMS 7276 预成型的O形环密封圈 6 页
SAE AS 3214-1976(R2001) AMS 5689 耐腐蚀和耐热的安全钢丝 1 页
SAE AS 3215A-1979(R2004) 重型内螺旋形的耐腐蚀钢固定环 6 页
SAE AS 3216A-1979(R2006) 重型外螺旋形的耐腐蚀钢固定环 页
SAE AS 3217A-1979(R2006) 轻型内螺旋形的耐腐蚀钢固定环 页
SAE AS 3218A-1979(R2006) RING, RETAINING-SPIRAL, EXTERNAL, LIGHT DUTY, CRES 页
SAE AS 3219A-1979(R2006) 螺旋形固定环的最小变形尺寸和验收标准 页
SAE AS 3220-1977(R2005) 管接头的扩口铝套管 页
SAE AS 3221A-1994(R2006) Cover - Engine Accessory Drive, Square, 2.653 Bolt Circle, AMS 4490 FSC 2995 页
SAE AS 3222B-1994(R2006) Cover - Engine Accessory Drive, Square, 5.000 Bolt Circle, AMS 4490 FSC 2995 页
SAE AS 3223A-1994(R2006) AMS 4490螺栓分布圆直径为5.000的发动机辅助传动装置的圆形盖子 页
SAE AS 3224A-1994(R2006) AMS 4490螺栓分布圆直径为8.000的发动机辅助传动装置的圆形盖子 页
SAE AS 3225B-1994(R2006) Cover - Engine Accessory Drive, Round, 10.000 Bolt Circle, AMS 4490 FSC 2995 页
SAE AS 3226-1978(R2001) AMS 5646 T形管的凸台 3 页
SAE AS 3228A-1996(R2006) Rivet - Tubular, Countersunk, AS 7228 FSC 5320 页
SAE AS 3229A-1996(R2006) RIVET - TUBULAR, UNIVERSAL, AS7228 FSC 5320 页
SAE AS 3230A-1996(R2006) AS 7232 埋头管形铆钉 页
SAE AS 3231A-1996(R2006) AS 7232 通用管形铆钉 页
SAE AS 3232A-2001 AMS 5708,.1900-32 UNJF-3A 倒角的T形头螺栓 3 页
SAE AS 3233-1980(R2001) AMS 5708,.2500-28 UNJF-3A 倒角的T形头螺栓 2 页
SAE AS 3234-1980(R2001) AMS 5708,.3125-24 UNJF-3A 倒角的T形头螺栓 2 页
SAE AS 3235B-2003 UNS N07001,165 KSI MIN,.3750-24 UNJF-3A 倒角的耐腐蚀钢T形头螺栓 3 页
SAE AS 3236B-2002 UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A PD杆、双六角扩展垫圈头的耐腐蚀钢机械螺栓 2 页
SAE AS 3237B-2002 UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A PD杆、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3238B-2002 UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A PD杆、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3239B-2002 UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A PD杆、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3240B-2002 UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A PD杆、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3241B-2002 UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A PD杆、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3242B-2002 UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A PD杆、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3243B-2002 UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A PD杆、双六角扩展垫圈头的耐腐蚀钢机械螺栓 2 页
SAE AS 3244B-2002 UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A PD杆、钻孔、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3245B-2002 UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A PD杆、钻孔、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3246B-2002 UNS NO7718, 185 KSI MIN, .3750-24 UNJF-3A PD杆、钻孔、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3247B-2002 UNS NO7718, 185 KSI MIN, .4375-20 UNJF-3A PD杆、钻孔、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3248B-2002 UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A PD杆、钻孔、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3249B-2002 UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A PD杆、钻孔、双六角扩展垫圈头的耐腐蚀钢机械螺栓 3 页
SAE AS 3250B-2002 UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A PD杆、钻孔、双六角扩展垫圈头、镀银的耐腐蚀钢机械螺栓 2 页
SAE AS 3251B-2002 UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A PD杆、钻孔、双六角扩展垫圈头、镀银的耐腐蚀钢机械螺栓 3 页
SAE AS 3252B-2002 UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A PD杆、钻孔、双六角扩展垫圈头、镀银的耐腐蚀钢机械螺栓 3 页
SAE AS 3253B-2002 UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A PD杆、钻孔、双六角扩展垫圈头、镀银的耐腐蚀钢机械螺栓 3 页
SAE AS 3254B-2002 UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A PD杆、钻孔、双六角扩展垫圈头、镀银的耐腐蚀钢机械螺栓 3 页
SAE AS 3255B-2002 UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A PD杆、钻孔、双六角扩展垫圈头、镀银的耐腐蚀钢机械螺栓 3 页
SAE AS 3256B-2002 UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A PD杆、钻孔、双六角扩展垫圈头、镀银的耐腐蚀钢机械螺栓 3 页
SAE AS 3257A-2003 有.204孔、高温、加垫的耐腐蚀钢环形夹具 4 页
SAE AS 3259-1978 PIN - COTTER, CRES AMS 7211, METRIC SERIES FSC 5315 页
SAE AS 3261-1980(R2004) AMS 7251 浮动夹的自锁螺母 1 页
SAE AS 3262A-1990(R2006) Nut, Self-Locking, Plate - 2 Lug, Floating, CBored, UNS S66286 FSC 5310; UNS S66286 页
SAE AS 3265-1979(R2006) AMS 5525 米制的荷载分布平垫圈 页
SAE AS 3268A-1999(R2003) 对开式增强管套 3 页
SAE AS 3269A-1999(R2003) 带凸肩的对开式增强管套 3 页
SAE AS 3272-1992(R2004) 700°F、UNS S66286、UNJ螺纹、涂覆干薄膜、齿状杆的自锁扭紧螺母 2 页
SAE AS 3273-1992(R2004) 1200°F、UNS S66286、UNJ螺纹、镀银、齿状杆的自锁扭紧螺母 2 页
SAE AS 3291-1982(R2004) AMS 5709 双六角自锁螺母 3 页
SAE AS 3298-1990(R2001) 英制的管夹具聚四氟乙烯支撑垫 2 页
SAE AS 3303-1985(R2001) AMS 5708, .190-32 UNJF-3A PD杆六角头机械螺栓 2 页
SAE AS 3307-1985(R2001) AMS 5708, .250-28 UNJF-3A PD杆六角头机械螺栓 2 页
SAE AS 3308-1985(R2001) AMS 5708, .3125-24 UNJF-3A PD杆六角头机械螺栓 2 页
SAE AS 3309-1985(R2001) AMS 5708, .375-24 UNJF-3A PD杆六角头机械螺栓 2 页
SAE AS 3319B-2005 STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .190-24UNJC X .190-32UNJF FSC 5307 页
SAE AS 3319C-2006 STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .190-24UNJC X .190-32UNJF FSC 5307 页
SAE AS 3320B-2005 STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .250-20UNJC X .250-28UNJF FSC 5307 页
SAE AS 3320C-2006 STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .250-20UNJC X .250-28UNJF FSC 5307 页
SAE AS 3321B-2005 STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .3125-18UNJC X .3125-24UNJF FSC 5307 页
SAE AS 3321C-2006 STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .3125-18UNJC X .3125-24UNJF FSC 5307 页
SAE AS 3322B-2005 STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .375-16UNJC X .375-24UNJF FSC 5307 页
SAE AS 3322C-2006 STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .375-16UNJC X .375-24UNJF FSC 5307 页
SAE AS 3326-1985(R2006) 系留垫圈自锁钢螺母 页
SAE AS 3332A-1985(R2006) 管连接用铜平垫圈 页
SAE AS 33391-2004 PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS FSC 5975 页
SAE AS 33401-2004 BULKHEAD BRACKET FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS FSC 5975 页
SAE AS 33411-2004 BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS FSC 5975 页
SAE AS 33481-1997(R2004) Contact Bushing, Electric, Wire Barrel FSC 5935 页
SAE AS 33514-1998 Fitting End, Standard Dimensions for Flareless Tube Connection and Gasket Seal FSC 4730 页
SAE AS 33515-1998 Fitting End, Standard Dimensions for Bulkhead Flareless Tube Connections FSC 4730; Should Be Used Instead of MS33515, Which Was Cancelled on 13 January 2000 页
SAE AS 33559-1998 Adapter, Aircraft, Jacking Point, Design and Installation of FSC 1730; Should Be Used Instead of MS33559E, Which Was Cancelled on 01 November 1999 页
SAE AS 33566-2000(R2004) FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORS FSC 4730; Should Be Used Instead of MS33566, Which Was Cancelled on 14 September 2000 页
SAE AS 33583-1997(R2001) Tubing End Double Flare, Standard Dimensions for FSC 4730 页
SAE AS 33601-2001(R2005) Track and Stud Fitting for Cargo Transport Aircraft, Standard Dimensions for FSC 1560 页
SAE AS 33611-1997(R2001) Tube Bend Radii FSC 4710 页
SAE AS 33671C-2005 (R) STRAP, TIEDOWN, ELECTRICAL COMPONENTS, ADJUSTABLE, SELFCLINCHING, PLASTIC, TYPE I, CLASS 1 FSC 5975 页
SAE AS 33681A-1998 Strap, Tiedown, Electrical Components, Identification, Adjustable, Self-Clinching, Plastic, Type II, Class 1 页
SAE AS 33698-2002 Insert Arrangements, Electric Connector, Shell Size 3 FSC 5935 页
SAE AS 33699-2002 Insert Arrangements, Electric Connector, Shell Size 7 FSC 5935 页
SAE AS 33700-2002 Insert Arrangements, Electric Connector, Shell Size 12 FSC 5935 页
SAE AS 33701-2002 Insert Arrangements, Electric Connector, Shell Size 19 FSC 5935 页
SAE AS 33702-2002 Insert Arrangements, Electric Connector, Shell Size 27 FSC 5935 页
SAE AS 33703-2002 Insert Arrangements, Electric Connector, Shell Size 37 FSC 5935 页
SAE AS 33731-1997(R2003) Strip, Mounting, Nut Insulating, for MS27212 Terminal Board FSC 5970 页
SAE AS 33931A-1998(R2001) Packing, Preformed, Straight Thread Tube Fitting Boss, Hydraulic, -65 Degrees F to +275 Degress F FSC 5330 页
SAE AS 3397-1984(R2006) AMS 7251 缩小封套的双六角自锁螺母 页
SAE AS 3400-1985(R2006) AMS 5708, .190-32 UNJF-3A PD杆、1个钻孔、六角头的机械螺栓 页
SAE AS 34001A-1998(R2003) Connectors, Receptacle, Electric, Wall Mounting, Front Release, Crimp Contact, AN Type FSC 5935; Should Be Used for New Design Instead of MS3400, which Was Inactivated for New Design January 8, 1999 页
SAE AS 34011-1998(R2003) Connectors, Receptacle, Electric, Cable Connecting, Front Release, Crimp Contact, AN Type FSC 5935 页
SAE AS 3401-1985(R2006) Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .250-28 UNJF-3A FSC 5306 页
SAE AS 340-1945(R2004) 集装箱检验窗孔的盖子 1 页
SAE AS 3402-1985(R2001) AMS 5708, .3125-24 UNJF-3A PD杆、1个钻孔、六角头的机械螺栓 2 页
SAE AS 34021A-1998(R2003) Connector, Receptacle, Electric, Box Mounting, Front Release, Crimp Contact, AN Type with FSC 5935; Should Be Used for New Design Instead of MS3402, Which Was Inactivated for New Design on January 8, 1999 页
SAE AS 3403-1985(R2001) AMS 5708, .375-24 UNJF-3A PD杆、1个钻孔、六角头的机械螺栓 2 页
SAE AS 34041-1998(R2003) Connectors, Receptacle, Electric, Jam Nut Mounting, Front Release, Crimp Contact, AN Type FSC 5935 页
SAE AS 3404-1985(R2001) AMS 5708, .190-32 UNJF-3A PD杆、6个钻孔、六角头的机械螺栓 2 页
SAE AS 3405-1985(R2001) AMS 5708, .250-28 UNJF-3A PD杆、6个钻孔、六角头的机械螺栓 2 页
SAE AS 34061-1998(R2003) Connectors, Plug, Electric, Front Release, Crimp Contact, AN Type FSC 5935 页
SAE AS 3406-1985(R2001) AMS 5708, .3125-24 UNJF-3A PD杆、6个钻孔、六角头的机械螺栓 2 页
SAE AS 3407-1985(R2001) AMS 5708, .375-24 UNJF-3A PD杆、6个钻孔、六角头的机械螺栓 2 页
SAE AS 34081-2004 CONNECTORS, PLUG, ELECTRIC, 90?ASSEMBLY, CRIMP CONTACT, AN TYPE FSC 5935 页
SAE AS 34091-2004 CONNECTORS, PLUG, ELECTRIC, 45 DEGREES ASSEMBLY, CRIMP CONTACT, AN TYPE FSC 5935 页
SAE AS 3409-1988(R2004) AMS 5662,.190-32UNJF-3A 倒角的T形头螺栓（耐应力断裂） 3 页
SAE AS 3410A-2001 AMS 5662,.250-28UNJF-3A 倒角的T形头螺栓（耐应力断裂） 3 页
SAE AS 3411A-2001(R2006) AMS 5662,.3125-24UNJF-3A 倒角的T形头螺栓（耐应力断裂） 页
SAE AS 34121A-1998(R2003) Connectors, Receptacle, Electric, Wall Mounting, Front Release, Crimp Contact, AN Type - with Accessory Threads FSC 5935; Should Be Used Instead of MS3412; Amendment 1 - November 2004 页
SAE AS 3412A-2001 AMS 5662,.375- 24UNJF-3A 倒角的T形头螺栓（耐应力断裂） 3 页
SAE AS 3413-1985(R2006) AMS 5662, .190-32UNJF-3A PD杆、六角头的机械螺栓（耐应力断裂） 页
SAE AS 3414-1985(R2006) AMS 5662, .250-28UNJF-3A PD杆、六角头的机械螺栓（耐应力断裂） 页
SAE AS 3415-1985(R2006) AMS 5662, .3125-24UNJF- 3A PD杆、六角头的机械螺栓（耐应力断裂） 页
SAE AS 3416-1985(R2006) AMS 5662, .375-24UNJF-3A PD杆、六角头的机械螺栓（耐应力断裂） 页
SAE AS 3417-1985(R2006) AMS 5662 .190-32UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓（耐应力断裂） 页
SAE AS 3418-1985(R2006) AMS 5662, .250- 28UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓（耐应力断裂） 页
SAE AS 3419-1985(R2006) AMS 5662, .3125- 24UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓（耐应力断裂） 页
SAE AS 34201-2004 ADAPTER, CABLE CLAMP TO CABLE, BUSHING, TELESCOPING FSC 5935 页
SAE AS 3420-1985(R2001) AMS 5662, .375- 24UNJF-3A 紧公差杆、双六角扩展垫圈头的机械螺栓（耐应力断裂） 2 页
SAE AS 3435-1987(R2001) AMS4901或AMS4921 用于.190英寸螺栓的间隔套 1 页
SAE AS 34361-2004 CONNECTOR, PLUG, ELECTRIC, SOLDER CONTACT, UTILITY FSC 5935 页
SAE AS 3436-1987(R2001) AMS4901或AMS4921 用于.250英寸螺栓的间隔套 1 页
SAE AS 34411-2004 CONNECTOR, PLUG, ELECTRIC, UTILITY FSC 5935 页
SAE AS 34451-2004 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 2 (CLASS E) FSC 5935;"BEST COPY AVAILABLE" 页
SAE AS 34461-1998(R2004) Connector, Plug, Electric, Crimp Type, Rack and Panel, Series 3 (Class L and E) FSC 5935 页
SAE AS 34501A-1998(R2003) Connectors, Receptacle, Electrical, Wall Mounting, Rear Release, Crimp Contact, AN Type FSC 5935; Should be used Instead of MS3450 页
SAE AS 34511-1998(R2003) Connectors, Receptacle, Electrical, Cable Connecting, Rear Release, Crimp Contact, AN Type FSC 5935; Should be used Insted of MS3451 页
SAE AS 34521-2004 CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE WITH FSC 5935 页
SAE AS 34541-1998(R2003) Connectors, Receptacle, Electrical, Jam Nut Mounting, Rear Release Crimp Contact, AN Type FSC 5935; Should Be Used Instead of MS3454 页
SAE AS 34561-1998(R2004) Connectors, Plug, Electrical, Rear Release, Crimp Contact, AN Type FSC 5935 页
SAE AS 34591-1998(R2003) Connector, Plug, Electrical, Self-Locking, Coupling Nut, Rear Release, Crimp Contact, AN Type FSC 5935; Should Be Used Instead of MS3459 页
SAE AS 34671-2004 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) FSC 5935 页
SAE AS 3472A-1996(R2006) UNS S66286 缠绕式重型和中型的内固定环 页
SAE AS 3477A-1997(R2001) UNS S66286、UNJ螺纹、镀银、扩展垫圈的双六角形自锁螺母 3 页
SAE AS 3478C-2002 UNS S66286，125 ksi/800°F类、薄型双凸耳平板自锁螺母 2 页
SAE AS 3479D-2002 UNS S66286，125 ksi/800°F类、薄型浮动单凸耳平板自锁螺母 2 页
SAE AS 34801-2004 TOOL, CONNECTOR ASSEMBLY; FOR MIL-C-5015 CONNECTORS FSC 5120 页
SAE AS 3480C-2002 UNS S66286，125 ksi/800°F类、薄型、缩小铆钉间隔的单凸耳平板自锁螺母 3 页
SAE AS 3481E-2002 UNS S66286，125 ksi/800°F类、薄型、缩小铆钉间隔的浮动双凸耳平板自锁螺母 3 页
SAE AS 3482C-2002 UNS S66286，125 ksi/800°F类、薄型、缩小铆钉间隔、并排的平板自锁螺母 3 页
SAE AS 3483A-1994(R2001) UNS S66286，125 ksi/800°F类、常规六角自锁螺母 2 页
SAE AS 3485-1993(R2004) UNS S66286，12点镀银薄型自锁螺母 2 页
SAE AS 3486C-2004 UNS S66286，160 ksi/800°F类、干薄膜润滑剂、异径法兰、扩展的双六角自锁螺母 3 页
SAE AS 3490-1992(R2004) .375-16 UNJC-3A MOD X .3125-24 UNJF-3A(UNS S66286) 1.5直径啮合的阶梯状柱螺栓 3 页
SAE AS 3491-1993(R2004) X或XV型发动机辅助传动装置的垫片 2 页
SAE AS 3492-1993(R2004) XI型发动机辅助传动装置的垫片 2 页
SAE AS 3493-1993(R2004) XII, XIV A 和 XIV B型发动机辅助传动装置的垫片 2 页
SAE AS 3494-1993(R2004) XIII型发动机辅助传动装置的垫片 2 页
SAE AS 3495-1993(R2004) XIV-C型发动机辅助传动装置的垫片 2 页
SAE AS 3496-1993(R2004) XVI型发动机辅助传动装置的垫片 2 页
SAE AS 3497-1993(R2004) XIX型发动机辅助传动装置的垫片 2 页
SAE AS 3498-1993(R2004) 发动机辅助传动装置的垫片 2 页
SAE AS 3504A-2004 UNS N07718,UNJ螺纹，1025°F，镀银的自锁薄壁短螺套 2 页
SAE AS 35051-1998(R2003) Cover for Use with MS90362 external Power Receptacle FSC 5935 页
SAE AS 3505A-2004 UNS N07718,UNJ螺纹，1025°F，镀银的自锁薄壁长螺套 2 页
SAE AS 35061-1998(R2003) Connector, Receptacle External Electric Power, Aircraft, 28 Volt DC Operating Power FSC 5935 页
SAE AS 3506A-2004 UNS N07718，185 ksi/1025°F类、镀银自锁薄壁螺套的采购规范 17 页
SAE AS 35071-2004 CONNECTOR, PLUG, ELECTRIC, SOLDER CONTACT, QUICK DISCONNECT, UTILITY FSC 5935 页
SAE AS 3507B-2005 短的和长的自锁薄壁螺套的安装和卸除 16 页
SAE AS 3508-1993(R2004) 短的和长的薄壁螺套孔的制备 3 页
SAE AS 35091-2004 RECEPTACLES, ELECTRIC, AIRCRAFT STORAGE BATTERY FSC 5935 页
SAE AS 3509A-1995(R2006) Cable, Safety, Kit, Nickel Alloy, UNS N06600 UNS N06600; FSC 5340 页
SAE AS 3510A-1995(R2006) Cable, Safety, Kit - Corrosion and Heat Resistant Steel, UNS S32100 UNS S32100; FSC 5340 页
SAE AS 3511A-1995(R2006) UNS S30400 耐腐蚀钢的安全电缆组件 页
SAE AS 351A-1947(R2005) 传动轴的扳手(轴尺寸 No. 40-50-60) 页
SAE AS 3528-1999(R2004) UNS S66286-160 ksi 双六角头保险螺栓 15 页
SAE AS 3529-1999(R2004) UNS S66286-160 ksi 钻孔杆、双六角头保险螺栓 15 页
SAE AS 352A-1947(R2005) 传动轴的扳手(轴尺寸 No. 10-20-30) 页
SAE AS 3530-1999(R2004) UNS S66286-160 ksi 紧公差杆、双六角扩展垫圈头的机械螺栓 15 页
SAE AS 3531-1999(R2004) UNS S66286-160 ksi 钻孔头、紧公差杆、双六角扩展垫圈头的机械螺栓 15 页
SAE AS 353-1946(R2005) Handle - Propeller Shaft Wrench 页
SAE AS 3532-1999(R2004) UNS N07718-185 ksi 钻孔杆、双六角头保险螺栓 15 页
SAE AS 3534-1994(R2006) Nut, Self-Locking, Shank, UNS S66286 Silver Plate on THD Only, UNJ Thread FSC 5310 页
SAE AS 3535-1994(R2006) Nut, Self-Locking, Shank, UNS N07001 Silver Plate UNJ Thread FSC 5310 页
SAE AS 35411A-2005 Fittings, Lubrication 页
SAE AS 3542-1994(R2006) Cover - Type XVI, XVII-C, D, E, and F Engine Accessory Drive FSC 2995 页
SAE AS 3543-1999(R2004) 轻型、自拉削键、140 ksi/1200°F、UNS S66286键锁定的定位柱螺栓 3 页
SAE AS 3544-1999(R2004) 重型、自拉削键、140 ksi/1200°F、UNS S66286键锁定的定位柱螺栓 页
SAE AS 3545-1999(R2004) 重型、自拉削键、UNS S66286键锁定的定位自锁螺套 2 页
SAE AS 3546-1999(R2004) 特重型、自拉削键、UNS S66286键锁定的定位自锁螺套 2 页
SAE AS 3547-1995(R2006) Assembly Nut and Clip, Removable Self-Locking Nut, UNS S66286 UNS S66286; FSC 5310 页
SAE AS 3548-1995(R2006) Basket, Removable Self-Locking Nut, UNS S66286 UNS S66286; FSC 5310 页
SAE AS 3549-1995(R2006) UNS S30403 可拆卸自锁螺母的套筒 页
SAE AS 354A-1947(R2005) 传动轴扳手的销 页
SAE AS 3550-1995(R2006) 可拆卸自锁螺母的平板组装螺母 页
SAE AS 3551-1994(R2006) AMS 7272 预成型的O形环密封圈 页
SAE AS 3552-1995(R2006) UNS N07001,180 ksi,1400°F,扩展扳手垫、镀银的双六角自锁螺母 页
SAE AS 3553-1995(R2006) Nut, Self-Locking, Double Hexagon, Silver Plated, Counterbored 180 ksi, 1400 Degrees F, UNS N07001 FSC 5310 页
SAE AS 3554-1995(R2006) Nut, Self-Locking, Double Hexagon, Silver Plated, Reduced Height 180 ksi, 1400 Degrees F, UNS N07001 FSC 5310 页
SAE AS 3563B-2004 UNS S66286,160 ksi,800°F, 扩展扳手垫、固体薄膜润滑的双六角自锁螺母 3 页
SAE AS 3564B-2004 UNS S66286,160 ksi,800°F, 埋头孔、固体薄膜润滑的双六角自锁螺母 3 页
SAE AS 3565-1995(R2006) Washer, Flat, Countersunk UNS S66286 FSC 5310 页
SAE AS 3566-1997(R2006) UNJ 16齿节螺纹状、有效扭矩型自锁槽顶螺母 页
SAE AS 3568-1996(R2006) AMS 5504 (UNS S41000)U型圆头传动螺杆 页
SAE AS 3569-1995(R2006) Packing, Preformed - O-Ring Seal AMS 7270 FSC 5330 页
SAE AS 3570-1995(R2006) Packing, Preformed - O-Ring Seal AMS 7274 FSC 5330 页
SAE AS 3572-1999(R2004) 重型、自拉削键、UNS S66286键锁定的定位非锁定螺套 2 页
SAE AS 3573-1999(R2004) 特重型、自拉削键、UNS S66286键锁定的定位非锁定螺套 2 页
SAE AS 3574A-1996(R2006) BOLT, SHEAR - DOUBLE HEX HEAD, UNS N07718 - 185 ksi FSC 5306 页
SAE AS 35769-2001 Gasket, Metallic, Encased, Annular, Copper FSC 5330 页
SAE AS 3577-1995(R2006) Pin, Spring - Tubular, Coiled, Standard Duty, UNS N07718 FSC 5315 页
SAE AS 3578-1996(R2006) AMS 7271 预成型的O形环密封圈 页
SAE AS 3580-1996(R2006) Bolt, Machine - Double Hex Head, PD Shank, UNS N07718 - 185 ksi FSC 5306 页
SAE AS 3581-1996(R2006) Packing, Preformed - O-Ring Seal AMS 7259 FSC 5330 页
SAE AS 3582-1996(R2006) Packing, Preformed - O-Ring Seal AMS 3304 FSC 5330 页
SAE AS 3584-1996(R2006) Pin and Plug, Expansion, Kit Cres, 416, Long FSC 5340 页
SAE AS 3585-1996(R2001) 短的416耐腐蚀钢膨胀销和塞组件 1 页
SAE AS 3586-1996(R2001) 长的303耐腐蚀钢膨胀销和塞组件 1 页
SAE AS 3587-1996(R2001) 短的303耐腐蚀钢膨胀销和塞组件 1 页

SAE标准清单请联系我们。委托测试请联系86-021-36411223